Re: [PATCH 3/8] dt-bindings: arm: qcom: Add compatible for SA8155p-adp board

[Bjorn Andersson]

On Mon 07 Jun 06:38 CDT 2021, Bhupesh Sharma wrote:

> SA8155p-adp board is based on Qualcomm Snapdragon sm8150
> SoC.
> 
> Add support for the same.

The SA8155p is similar to SM8150 and we can reuse most things, but I
think we can afford to add qcom,sa8155p in the DT bindings.

> 
> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Cc: Liam Girdwood <lgirdwood@xxxxxxxxx>
> Cc: Mark Brown <broonie@xxxxxxxxxx>
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: Vinod Koul <vkoul@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Andy Gross <agross@xxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: linux-gpio@xxxxxxxxxxxxxxx
> Cc: bhupesh.linux@xxxxxxxxx
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index 9b27e991bddc..b5897f1f9695 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -42,11 +42,13 @@ description: |
>          sdm660
>          sdm845
>          sdx55
> +        sm8150

Naturally sm8150 should be part of this list, but please also add
sa8155p as well.

>          sm8250
>          sm8350
>  
>    The 'board' element must be one of the following strings:
>  
> +        adp
>          cdp
>          cp01-c1
>          dragonboard
> @@ -198,6 +200,12 @@ properties:
>                - qcom,ipq6018-cp01-c1
>            - const: qcom,ipq6018
>  
> +      - items:
> +          - enum:
> +              - qcom,sa8155p-adp
> +              - qcom,sm8150-mtp
> +          - const: qcom,sm8150

And please split this in two (one qcom,sm8150-mtp and qcom,sm8150, and
one qcom,sa8155p-adp and qcom,sa8155p).

And note that this is saying that your compatible needs to be one of the
enum entries, followed by the const, but in your dts you only specified
qcom,sa8155p-adp. It needs to be:

	compatible = "qcom,sa8155p-adp", "qcom,sa8155p";

Thanks,
Bjorn

> +
>        - items:
>            - enum:
>                - qcom,qrb5165-rb5
> -- 
> 2.31.1
>