Re: [PATCH v2 6/6] extcon: sm5502: Add support for SM5504

From: Chanwoo Choi
Date: Tue Jun 01 2021 - 12:27:47 EST


Hi,

Almost looks good to me. I add some comments.

On 21. 5. 31. 오후 10:34, Stephan Gerhold wrote:
SM5504 is another MUIC from Silicon Mitus that is fairly similar
to SM5502. They seem to use the same register set, but:

- SM5504 has some additional bits in SM5502_REG_CONTROL
- SM5504 has a quite different set of interrupts
- SM5504 reports USB OTG as dev_type1 = BIT(0) instead of BIT(7)

Overall it's minor and we can support this using the existing
enum sm5502_types plus a few switch/if statements.

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
Changes in v2: Fix warning: cast to smaller integer type 'enum sm5502_types'
from 'const void *' [-Wvoid-pointer-to-enum-cast]
reported by kernel test robot

Interestingly enough the register set (and especially the interrupts)
also look *very* similar to Richtek RT8973A (extcon-rt8973a) but
I didn't investigate this further.

Note that the changes in this patch are mostly based on guesswork
based on a SM5504 driver from Nitin Chaudhary [1] used in some Samsung
vendor kernels, since I was not able to find a public datasheet for SM5504.

[1]: https://github.com/NitinChaudharyUSC/MSM8x16_8x26/blob/master/drivers/misc/sm5504.c
---
drivers/extcon/Kconfig | 2 +-
drivers/extcon/extcon-sm5502.c | 164 +++++++++++++++++++++++++++++----
drivers/extcon/extcon-sm5502.h | 79 ++++++++++++++++
3 files changed, 228 insertions(+), 17 deletions(-)

diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index e3db936becfd..c69d40ae5619 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -154,7 +154,7 @@ config EXTCON_RT8973A
from abnormal high input voltage (up to 28V).
config EXTCON_SM5502
- tristate "Silicon Mitus SM5502 EXTCON support"
+ tristate "Silicon Mitus SM5502/SM5504 EXTCON support"
depends on I2C
select IRQ_DOMAIN
select REGMAP_I2C
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index 9f40bb9f1f81..49a35db61112 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -40,6 +40,7 @@ struct sm5502_muic_info {
struct i2c_client *i2c;
struct regmap *regmap;
+ enum sm5502_types type;
struct regmap_irq_chip_data *irq_data;
struct muic_irq *muic_irqs;
unsigned int num_muic_irqs;
@@ -90,6 +91,33 @@ static struct reg_data sm5502_reg_data[] = {
},
};
+/* Default value of SM5504 register to bring up MUIC device. */
+static struct reg_data sm5504_reg_data[] = {
+ {
+ .reg = SM5502_REG_RESET,
+ .val = SM5502_REG_RESET_MASK,
+ .invert = true,
+ }, {
+ .reg = SM5502_REG_INTMASK1,
+ .val = SM5504_REG_INTM1_ATTACH_MASK
+ | SM5504_REG_INTM1_DETACH_MASK,
+ .invert = false,
+ }, {
+ .reg = SM5502_REG_INTMASK2,
+ .val = SM5504_REG_INTM2_RID_CHG_MASK
+ | SM5504_REG_INTM2_UVLO_MASK
+ | SM5504_REG_INTM2_POR_MASK,
+ .invert = true,
+ }, {
+ .reg = SM5502_REG_CONTROL,
+ .val = SM5502_REG_CONTROL_MANUAL_SW_MASK
+ | SM5504_REG_CONTROL_CHGTYP_MASK
+ | SM5504_REG_CONTROL_USBCHDEN_MASK
+ | SM5504_REG_CONTROL_ADC_EN_MASK,
+ .invert = true,
+ },
+};
+
/* List of detectable cables */
static const unsigned int sm5502_extcon_cable[] = {
EXTCON_USB,
@@ -198,6 +226,55 @@ static const struct regmap_irq_chip sm5502_muic_irq_chip = {
.num_irqs = ARRAY_SIZE(sm5502_irqs),
};
+/* List of supported interrupt for SM5504 */
+static struct muic_irq sm5504_muic_irqs[] = {
+ { SM5504_IRQ_INT1_ATTACH, "muic-attach" },
+ { SM5504_IRQ_INT1_DETACH, "muic-detach" },
+ { SM5504_IRQ_INT1_CHG_DET, "muic-chg-det" },
+ { SM5504_IRQ_INT1_DCD_OUT, "muic-dcd-out" },
+ { SM5504_IRQ_INT1_OVP_EVENT, "muic-ovp-event" },
+ { SM5504_IRQ_INT1_CONNECT, "muic-connect" },
+ { SM5504_IRQ_INT1_ADC_CHG, "muic-adc-chg" },
+ { SM5504_IRQ_INT2_RID_CHG, "muic-rid-chg" },
+ { SM5504_IRQ_INT2_UVLO, "muic-uvlo" },
+ { SM5504_IRQ_INT2_POR, "muic-por" },
+ { SM5504_IRQ_INT2_OVP_FET, "muic-ovp-fet" },
+ { SM5504_IRQ_INT2_OCP_LATCH, "muic-ocp-latch" },
+ { SM5504_IRQ_INT2_OCP_EVENT, "muic-ocp-event" },
+ { SM5504_IRQ_INT2_OVP_OCP_EVENT, "muic-ovp-ocp-event" },
+};
+
+/* Define interrupt list of SM5504 to register regmap_irq */
+static const struct regmap_irq sm5504_irqs[] = {
+ /* INT1 interrupts */
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_ATTACH_MASK, },
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_DETACH_MASK, },
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_CHG_DET_MASK, },
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_DCD_OUT_MASK, },
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_OVP_MASK, },
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_CONNECT_MASK, },
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_ADC_CHG_MASK, },
+
+ /* INT2 interrupts */
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_RID_CHG_MASK,},
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_UVLO_MASK, },
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_POR_MASK, },
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_FET_MASK, },
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_LATCH_MASK, },
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_EVENT_MASK, },
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_OCP_EVENT_MASK, },
+};
+
+static const struct regmap_irq_chip sm5504_muic_irq_chip = {
+ .name = "sm5504",
+ .status_base = SM5502_REG_INT1,
+ .mask_base = SM5502_REG_INTMASK1,
+ .mask_invert = false,
+ .num_regs = 2,
+ .irqs = sm5504_irqs,
+ .num_irqs = ARRAY_SIZE(sm5504_irqs),
+};
+
/* Define regmap configuration of SM5502 for I2C communication */
static bool sm5502_muic_volatile_reg(struct device *dev, unsigned int reg)
{
@@ -276,9 +353,14 @@ static int sm5502_muic_set_path(struct sm5502_muic_info *info,
/* Return cable type of attached or detached accessories */
static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
{
- unsigned int cable_type, adc, dev_type1;
+ unsigned int cable_type, adc, dev_type1, otg_dev_type1;
int ret;
+ if (info->type == TYPE_SM5504)
+ otg_dev_type1 = SM5504_REG_DEV_TYPE1_USB_OTG_MASK;
+ else
+ otg_dev_type1 = SM5502_REG_DEV_TYPE1_USB_OTG_MASK;

Instead of initializing the local variable in this function,
you better to add 'dev_type1' variable in struct sm5502_muic_info.
And then use 'info->dev_type1'.

+
/* Read ADC value according to external cable or button */
ret = regmap_read(info->regmap, SM5502_REG_ADC, &adc);
if (ret) {
@@ -301,11 +383,9 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
return ret;
}
- switch (dev_type1) {
- case SM5502_REG_DEV_TYPE1_USB_OTG_MASK:
+ if (dev_type1 == otg_dev_type1) {
cable_type = SM5502_MUIC_ADC_GROUND_USB_OTG;
- break;
- default:
+ } else {
dev_dbg(info->dev,
"cannot identify the cable type: adc(0x%x), dev_type1(0x%x)\n",
adc, dev_type1);
@@ -358,6 +438,11 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
return ret;
}
+ if (dev_type1 == otg_dev_type1) {
+ cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG;
+ break;
+ }
+
switch (dev_type1) {
case SM5502_REG_DEV_TYPE1_USB_SDP_MASK:
cable_type = SM5502_MUIC_ADC_OPEN_USB;
@@ -365,9 +450,6 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
case SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK:
cable_type = SM5502_MUIC_ADC_OPEN_TA;
break;
- case SM5502_REG_DEV_TYPE1_USB_OTG_MASK:
- cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG;
- break;
default:
dev_dbg(info->dev,
"cannot identify the cable type: adc(0x%x)\n",
@@ -497,6 +579,34 @@ static int sm5502_parse_irq(struct sm5502_muic_info *info, int irq_type)
return 0;
}
+static int sm5504_parse_irq(struct sm5502_muic_info *info, int irq_type)
+{
+ switch (irq_type) {
+ case SM5504_IRQ_INT1_ATTACH:
+ info->irq_attach = true;
+ break;
+ case SM5504_IRQ_INT1_DETACH:
+ info->irq_detach = true;
+ break;
+ case SM5504_IRQ_INT1_CHG_DET:
+ case SM5504_IRQ_INT1_DCD_OUT:
+ case SM5504_IRQ_INT1_OVP_EVENT:
+ case SM5504_IRQ_INT1_CONNECT:
+ case SM5504_IRQ_INT1_ADC_CHG:
+ case SM5504_IRQ_INT2_RID_CHG:
+ case SM5504_IRQ_INT2_UVLO:
+ case SM5504_IRQ_INT2_POR:
+ case SM5504_IRQ_INT2_OVP_FET:
+ case SM5504_IRQ_INT2_OCP_LATCH:
+ case SM5504_IRQ_INT2_OCP_EVENT:
+ case SM5504_IRQ_INT2_OVP_OCP_EVENT:
+ default:
+ break;
+ }
+
+ return 0;
+}
+
static irqreturn_t sm5502_muic_irq_handler(int irq, void *data)
{
struct sm5502_muic_info *info = data;
@@ -506,7 +616,10 @@ static irqreturn_t sm5502_muic_irq_handler(int irq, void *data)
if (irq == info->muic_irqs[i].virq)
irq_type = info->muic_irqs[i].irq;
- ret = sm5502_parse_irq(info, irq_type);
+ if (info->type == TYPE_SM5504)
+ ret = sm5504_parse_irq(info, irq_type);
+ else
+ ret = sm5502_parse_irq(info, irq_type);

ditto. Better to add 'parse_irq' function pointer into struct sm5502_muic_info. And use 'info->parse_irq' instead of this.

if (ret < 0) {
dev_warn(info->dev, "cannot handle is interrupt:%d\n",
irq_type);
@@ -565,6 +678,7 @@ static void sm5502_init_dev_type(struct sm5502_muic_info *info)
static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
{
struct device_node *np = i2c->dev.of_node;
+ const struct regmap_irq_chip *irq_chip;
struct sm5502_muic_info *info;
int i, ret, irq_flags;
@@ -579,10 +693,26 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
info->dev = &i2c->dev;
info->i2c = i2c;
info->irq = i2c->irq;
- info->muic_irqs = sm5502_muic_irqs;
- info->num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs);
- info->reg_data = sm5502_reg_data;
- info->num_reg_data = ARRAY_SIZE(sm5502_reg_data);
+ info->type = (uintptr_t)device_get_match_data(info->dev);
+
+ switch (info->type) {
+ case TYPE_SM5502:
+ irq_chip = &sm5502_muic_irq_chip;
+ info->muic_irqs = sm5502_muic_irqs;
+ info->num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs);
+ info->reg_data = sm5502_reg_data;
+ info->num_reg_data = ARRAY_SIZE(sm5502_reg_data);
+ break;
+ case TYPE_SM5504:
+ irq_chip = &sm5504_muic_irq_chip;
+ info->muic_irqs = sm5504_muic_irqs;
+ info->num_muic_irqs = ARRAY_SIZE(sm5504_muic_irqs);
+ info->reg_data = sm5504_reg_data;
+ info->num_reg_data = ARRAY_SIZE(sm5504_reg_data);
+ break;
+ default:
+ return -EINVAL;
+ }
mutex_init(&info->mutex);
@@ -598,8 +728,8 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
/* Support irq domain for SM5502 MUIC device */
irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED;
- ret = devm_regmap_add_irq_chip(info->dev, info->regmap, info->irq, irq_flags,
- 0, &sm5502_muic_irq_chip, &info->irq_data);
+ ret = devm_regmap_add_irq_chip(info->dev, info->regmap, info->irq,
+ irq_flags, 0, irq_chip, &info->irq_data);
if (ret != 0) {
dev_err(info->dev, "failed to request IRQ %d: %d\n",
info->irq, ret);
@@ -660,7 +790,8 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
}
static const struct of_device_id sm5502_dt_match[] = {
- { .compatible = "siliconmitus,sm5502-muic" },
+ { .compatible = "siliconmitus,sm5502-muic", .data = (void *)TYPE_SM5502 },
+ { .compatible = "siliconmitus,sm5504-muic", .data = (void *)TYPE_SM5504 },
{ },
};
MODULE_DEVICE_TABLE(of, sm5502_dt_match);
@@ -692,6 +823,7 @@ static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops,
static const struct i2c_device_id sm5502_i2c_id[] = {
{ "sm5502", TYPE_SM5502 },
+ { "sm5504", TYPE_SM5504 },
{ }
};
MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id);
diff --git a/drivers/extcon/extcon-sm5502.h b/drivers/extcon/extcon-sm5502.h
index ce1f1ec310c4..0ce00274ed86 100644
--- a/drivers/extcon/extcon-sm5502.h
+++ b/drivers/extcon/extcon-sm5502.h
@@ -10,6 +10,7 @@
enum sm5502_types {
TYPE_SM5502,
+ TYPE_SM5504,
};
/* SM5502 registers */
@@ -93,6 +94,13 @@ enum sm5502_reg {
#define SM5502_REG_CONTROL_RAW_DATA_MASK (0x1 << SM5502_REG_CONTROL_RAW_DATA_SHIFT)
#define SM5502_REG_CONTROL_SW_OPEN_MASK (0x1 << SM5502_REG_CONTROL_SW_OPEN_SHIFT)
+#define SM5504_REG_CONTROL_CHGTYP_SHIFT 5
+#define SM5504_REG_CONTROL_USBCHDEN_SHIFT 6
+#define SM5504_REG_CONTROL_ADC_EN_SHIFT 7
+#define SM5504_REG_CONTROL_CHGTYP_MASK (0x1 << SM5504_REG_CONTROL_CHGTYP_SHIFT)
+#define SM5504_REG_CONTROL_USBCHDEN_MASK (0x1 << SM5504_REG_CONTROL_USBCHDEN_SHIFT)
+#define SM5504_REG_CONTROL_ADC_EN_MASK (0x1 << SM5504_REG_CONTROL_ADC_EN_SHIFT)
+
#define SM5502_REG_INTM1_ATTACH_SHIFT 0
#define SM5502_REG_INTM1_DETACH_SHIFT 1
#define SM5502_REG_INTM1_KP_SHIFT 2
@@ -123,6 +131,36 @@ enum sm5502_reg {
#define SM5502_REG_INTM2_STUCK_KEY_RCV_MASK (0x1 << SM5502_REG_INTM2_STUCK_KEY_RCV_SHIFT)
#define SM5502_REG_INTM2_MHL_MASK (0x1 << SM5502_REG_INTM2_MHL_SHIFT)
+#define SM5504_REG_INTM1_ATTACH_SHIFT 0
+#define SM5504_REG_INTM1_DETACH_SHIFT 1
+#define SM5504_REG_INTM1_CHG_DET_SHIFT 2
+#define SM5504_REG_INTM1_DCD_OUT_SHIFT 3
+#define SM5504_REG_INTM1_OVP_EVENT_SHIFT 4
+#define SM5504_REG_INTM1_CONNECT_SHIFT 5
+#define SM5504_REG_INTM1_ADC_CHG_SHIFT 6
+#define SM5504_REG_INTM1_ATTACH_MASK (0x1 << SM5504_REG_INTM1_ATTACH_SHIFT)
+#define SM5504_REG_INTM1_DETACH_MASK (0x1 << SM5504_REG_INTM1_DETACH_SHIFT)
+#define SM5504_REG_INTM1_CHG_DET_MASK (0x1 << SM5504_REG_INTM1_CHG_DET_SHIFT)
+#define SM5504_REG_INTM1_DCD_OUT_MASK (0x1 << SM5504_REG_INTM1_DCD_OUT_SHIFT)
+#define SM5504_REG_INTM1_OVP_EVENT_MASK (0x1 << SM5504_REG_INTM1_OVP_EVENT_SHIFT)
+#define SM5504_REG_INTM1_CONNECT_MASK (0x1 << SM5504_REG_INTM1_CONNECT_SHIFT)
+#define SM5504_REG_INTM1_ADC_CHG_MASK (0x1 << SM5504_REG_INTM1_ADC_CHG_SHIFT)
+
+#define SM5504_REG_INTM2_RID_CHG_SHIFT 0
+#define SM5504_REG_INTM2_UVLO_SHIFT 1
+#define SM5504_REG_INTM2_POR_SHIFT 2
+#define SM5504_REG_INTM2_OVP_FET_SHIFT 4
+#define SM5504_REG_INTM2_OCP_LATCH_SHIFT 5
+#define SM5504_REG_INTM2_OCP_EVENT_SHIFT 6
+#define SM5504_REG_INTM2_OVP_OCP_EVENT_SHIFT 7
+#define SM5504_REG_INTM2_RID_CHG_MASK (0x1 << SM5504_REG_INTM2_RID_CHG_SHIFT)
+#define SM5504_REG_INTM2_UVLO_MASK (0x1 << SM5504_REG_INTM2_UVLO_SHIFT)
+#define SM5504_REG_INTM2_POR_MASK (0x1 << SM5504_REG_INTM2_POR_SHIFT)
+#define SM5504_REG_INTM2_OVP_FET_MASK (0x1 << SM5504_REG_INTM2_OVP_FET_SHIFT)
+#define SM5504_REG_INTM2_OCP_LATCH_MASK (0x1 << SM5504_REG_INTM2_OCP_LATCH_SHIFT)
+#define SM5504_REG_INTM2_OCP_EVENT_MASK (0x1 << SM5504_REG_INTM2_OCP_EVENT_SHIFT)
+#define SM5504_REG_INTM2_OVP_OCP_EVENT_MASK (0x1 << SM5504_REG_INTM2_OVP_OCP_EVENT_SHIFT)
+
#define SM5502_REG_ADC_SHIFT 0
#define SM5502_REG_ADC_MASK (0x1f << SM5502_REG_ADC_SHIFT)
@@ -199,6 +237,9 @@ enum sm5502_reg {
#define SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK (0x1 << SM5502_REG_DEV_TYPE1_DEDICATED_CHG_SHIFT)
#define SM5502_REG_DEV_TYPE1_USB_OTG_MASK (0x1 << SM5502_REG_DEV_TYPE1_USB_OTG_SHIFT)
+#define SM5504_REG_DEV_TYPE1_USB_OTG_SHIFT 0
+#define SM5504_REG_DEV_TYPE1_USB_OTG_MASK (0x1 << SM5504_REG_DEV_TYPE1_USB_OTG_SHIFT)
+
#define SM5502_REG_DEV_TYPE2_JIG_USB_ON_SHIFT 0
#define SM5502_REG_DEV_TYPE2_JIG_USB_OFF_SHIFT 1
#define SM5502_REG_DEV_TYPE2_JIG_UART_ON_SHIFT 2
@@ -277,4 +318,42 @@ enum sm5502_irq {
#define SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK BIT(4)
#define SM5502_IRQ_INT2_MHL_MASK BIT(5)
+/* SM5504 Interrupts */
+enum sm5504_irq {
+ /* INT1 */
+ SM5504_IRQ_INT1_ATTACH,
+ SM5504_IRQ_INT1_DETACH,
+ SM5504_IRQ_INT1_CHG_DET,
+ SM5504_IRQ_INT1_DCD_OUT,
+ SM5504_IRQ_INT1_OVP_EVENT,
+ SM5504_IRQ_INT1_CONNECT,
+ SM5504_IRQ_INT1_ADC_CHG,
+
+ /* INT2 */
+ SM5504_IRQ_INT2_RID_CHG,
+ SM5504_IRQ_INT2_UVLO,
+ SM5504_IRQ_INT2_POR,
+ SM5504_IRQ_INT2_OVP_FET,
+ SM5504_IRQ_INT2_OCP_LATCH,
+ SM5504_IRQ_INT2_OCP_EVENT,
+ SM5504_IRQ_INT2_OVP_OCP_EVENT,
+
+ SM5504_IRQ_NUM,
+};
+
+#define SM5504_IRQ_INT1_ATTACH_MASK BIT(0)
+#define SM5504_IRQ_INT1_DETACH_MASK BIT(1)
+#define SM5504_IRQ_INT1_CHG_DET_MASK BIT(2)
+#define SM5504_IRQ_INT1_DCD_OUT_MASK BIT(3)
+#define SM5504_IRQ_INT1_OVP_MASK BIT(4)
+#define SM5504_IRQ_INT1_CONNECT_MASK BIT(5)
+#define SM5504_IRQ_INT1_ADC_CHG_MASK BIT(6)
+#define SM5504_IRQ_INT2_RID_CHG_MASK BIT(0)
+#define SM5504_IRQ_INT2_UVLO_MASK BIT(1)
+#define SM5504_IRQ_INT2_POR_MASK BIT(2)
+#define SM5504_IRQ_INT2_OVP_FET_MASK BIT(4)
+#define SM5504_IRQ_INT2_OCP_LATCH_MASK BIT(5)
+#define SM5504_IRQ_INT2_OCP_EVENT_MASK BIT(6)
+#define SM5504_IRQ_INT2_OVP_OCP_EVENT_MASK BIT(7)
+
#endif /* __LINUX_EXTCON_SM5502_H */



--
Best Regards,
Samsung Electronics
Chanwoo Choi