[PATCH net-next v3 3/9] net: phy: micrel: use consistent indention after define

From: Oleksij Rempel
Date: Wed May 26 2021 - 00:31:04 EST


This patch changes the indention to one space between "#define" and the
macro.

Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
drivers/net/phy/micrel.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index a14a00328fa3..227d88db7d27 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -38,15 +38,15 @@

/* general Interrupt control/status reg in vendor specific block. */
#define MII_KSZPHY_INTCS 0x1B
-#define KSZPHY_INTCS_JABBER BIT(15)
-#define KSZPHY_INTCS_RECEIVE_ERR BIT(14)
-#define KSZPHY_INTCS_PAGE_RECEIVE BIT(13)
-#define KSZPHY_INTCS_PARELLEL BIT(12)
-#define KSZPHY_INTCS_LINK_PARTNER_ACK BIT(11)
-#define KSZPHY_INTCS_LINK_DOWN BIT(10)
-#define KSZPHY_INTCS_REMOTE_FAULT BIT(9)
-#define KSZPHY_INTCS_LINK_UP BIT(8)
-#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
+#define KSZPHY_INTCS_JABBER BIT(15)
+#define KSZPHY_INTCS_RECEIVE_ERR BIT(14)
+#define KSZPHY_INTCS_PAGE_RECEIVE BIT(13)
+#define KSZPHY_INTCS_PARELLEL BIT(12)
+#define KSZPHY_INTCS_LINK_PARTNER_ACK BIT(11)
+#define KSZPHY_INTCS_LINK_DOWN BIT(10)
+#define KSZPHY_INTCS_REMOTE_FAULT BIT(9)
+#define KSZPHY_INTCS_LINK_UP BIT(8)
+#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
KSZPHY_INTCS_LINK_DOWN)
#define KSZPHY_INTCS_LINK_DOWN_STATUS BIT(2)
#define KSZPHY_INTCS_LINK_UP_STATUS BIT(0)
@@ -54,11 +54,11 @@
KSZPHY_INTCS_LINK_UP_STATUS)

/* PHY Control 1 */
-#define MII_KSZPHY_CTRL_1 0x1e
+#define MII_KSZPHY_CTRL_1 0x1e

/* PHY Control 2 / PHY Control (if no PHY Control 1) */
-#define MII_KSZPHY_CTRL_2 0x1f
-#define MII_KSZPHY_CTRL MII_KSZPHY_CTRL_2
+#define MII_KSZPHY_CTRL_2 0x1f
+#define MII_KSZPHY_CTRL MII_KSZPHY_CTRL_2
/* bitmap of PHY register to set interrupt mode */
#define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9)
#define KSZPHY_RMII_REF_CLK_SEL BIT(7)
--
2.29.2