Re: [PATCH v4] net: phy: add driver for Motorcomm yt8511 phy

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Thu, 20 May 2021 12:32:30 -0400 you wrote:
> Add a driver for the Motorcomm yt8511 phy that will be used in the
> production Pine64 rk3566-quartz64 development board.
> It supports gigabit transfer speeds, rgmii, and 125mhz clk output.
> 
> Signed-off-by: Peter Geis <pgwipeout@xxxxxxxxx>
> ---
> Changes v4:
> - Set fast ethernet delays as well
> - Use __phy_modify for delay setting
> - Enable PLL in sleep instead of disabling sleep
> - Don't set genphy functions that are defaults
> - Tested downshift and duplex detection
> 
> [...]

Here is the summary with links:
  - [v4] net: phy: add driver for Motorcomm yt8511 phy
    https://git.kernel.org/netdev/net-next/c/48e8c6f1612b

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html