[PATCH] usb: dwc3: meson-g12a: Disable the regulator in the error handling path of the probe

From: Christophe JAILLET
Date: Fri May 21 2021 - 12:55:57 EST


If an error occurs after a successful 'regulator_enable()' call,
'regulator_disable()' must be called.

Fix the error handling path of the probe accordingly.

The remove function doesn't need to be fixed, because the
'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()'
which is called via 'pm_runtime_set_suspended()' in the remove function.

Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
Please review carefully.

I'm not that sure about:
The remove function doesn't need to be fixed, because the
'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()'
which is called via 'pm_runtime_set_suspended()' in the remove function.

This is more a guess than anything else!
---
drivers/usb/dwc3/dwc3-meson-g12a.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index bdf1f98dfad8..804957525130 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -772,13 +772,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)

ret = priv->drvdata->usb_init(priv);
if (ret)
- goto err_disable_clks;
+ goto err_disable_regulator;

/* Init PHYs */
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = phy_init(priv->phys[i]);
if (ret)
- goto err_disable_clks;
+ goto err_disable_regulator;
}

/* Set PHY Power */
@@ -816,6 +816,10 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
for (i = 0 ; i < PHY_COUNT ; ++i)
phy_exit(priv->phys[i]);

+err_disable_regulator:
+ if (priv->vbus)
+ regulator_disable(priv->vbus);
+
err_disable_clks:
clk_bulk_disable_unprepare(priv->drvdata->num_clks,
priv->drvdata->clks);
--
2.30.2