Re: [PATCH V10] i2c: i2c-qcom-geni: Add shutdown callback for i2c

[Stephen Boyd]

Quoting rojay@xxxxxxxxxxxxxx (2021-05-16 23:32:50)
> Hi Stephen,
>
> Now, I have made the changes, calling i2c_mark_adapter_suspended() in
> shutdown() and i2c_mark_adapter_suspended()/_resumed() from runtime
> suspend/resume also and validated the changes. I have also picked
> your patch [1] for this validation.
>
> During the device boot up I am seeing multiple traces shown below.
> Are these expected now and needs to be fixed from rt5682/respective
> client driver?
>
> Trace1:
> [   11.709477] i2c i2c-9: Transfer while suspended
> [   11.905595] Call trace:
> [   11.908124]  __i2c_transfer+0xb8/0x38c
> [   11.911984]  i2c_transfer+0xa0/0xf4
> [   11.915569]  i2c_transfer_buffer_flags+0x68/0x9c
> [   11.920314]  regmap_i2c_write+0x34/0x64
> [   11.924255]  _regmap_raw_write_impl+0x4e8/0x7bc
> [   11.928911]  _regmap_bus_raw_write+0x70/0x8c
> [   11.933301]  _regmap_write+0x100/0x150
> [   11.937152]  regmap_write+0x54/0x78
> [   11.940744]  soc_component_write_no_lock+0x34/0xa8
> [   11.945666]  snd_soc_component_write+0x3c/0x5c
> [   11.950242]  rt5682_set_component_pll+0x1e4/0x2b4 [snd_soc_rt5682]
> [   11.956588]  snd_soc_component_set_pll+0x50/0xa8
> [   11.961328]  snd_soc_dai_set_pll+0x74/0xc8
> [   11.965542]  sc7180_snd_startup+0x9c/0x120 [snd_soc_sc7180]
> [   11.971262]  snd_soc_link_startup+0x34/0x88
> [   11.975557]  soc_pcm_open+0x100/0x538
> [   11.979323]  snd_pcm_open_substream+0x530/0x704
> [   11.983980]  snd_pcm_open+0xc8/0x210
> [   11.987653]  snd_pcm_playback_open+0x50/0x80
> [   11.992049]  snd_open+0x120/0x150
> [   11.995462]  chrdev_open+0xb8/0x1a4
> [   11.999056]  do_dentry_open+0x238/0x358
> [   12.003001]  vfs_open+0x34/0x40
> [   12.006235]  path_openat+0x9e8/0xd60
> [   12.009913]  do_filp_open+0x90/0x10c
> [   12.013587]  do_sys_open+0x148/0x314
> [   12.017260]  __arm64_compat_sys_openat+0x28/0x34
> [   12.022009]  el0_svc_common+0xa4/0x16c
> [   12.025860]  el0_svc_compat_handler+0x2c/0x40
> [   12.030337]  el0_svc_compat+0x8/0x10
> [   12.034018] ---[ end trace 745ead557fcbb5dc ]---

Ah I see. Maybe it isn't correct to mark the device as suspended in
runtime PM operations because the bus will be resumed during the
transfer? So only mark it suspended during system wide suspend/resume
transitions?

-Stephen

> [   12.040151] rt5682 9-001a: ASoC: error at soc_component_write_no_lock
> on rt5682.9-001a: -108
> [   12.049055] rt5682 9-001a: ASoC: error at soc_component_write_no_lock
> on rt5682.9-001a: -108
> [   12.057742] rt5682 9-001a: ASoC: error at
> snd_soc_component_update_bits on rt5682.9-001a: -108
>
> Trace2:
> [    3.515390] i2c i2c-2: Transfer while suspended
> [    3.606749] Call trace:
> [    3.606751]  __i2c_transfer+0xb8/0x38c
> [    3.606752]  i2c_transfer+0xa0/0xf4
> [    3.606754]  i2c_transfer_buffer_flags+0x68/0x9c
> [    3.639599] hub 2-1.4:1.0: USB hub found
> [    3.644375]  regmap_i2c_write+0x34/0x64
> [    3.644376]  _regmap_raw_write_impl+0x4e8/0x7bc
> [    3.644378]  _regmap_bus_raw_write+0x70/0x8c
> [    3.644379]  _regmap_write+0x100/0x150
> [    3.644381]  regmap_write+0x54/0x78
> [    3.644383]  ti_sn_aux_transfer+0x90/0x244
> [    3.650695] hub 2-1.4:1.0: 4 ports detected
> [    3.655288]  drm_dp_dpcd_access+0x8c/0x11c
> [    3.655289]  drm_dp_dpcd_read+0x64/0x10c
> [    3.655290]  ti_sn_bridge_enable+0x5c/0x824
> [    3.655292]  drm_atomic_bridge_chain_enable+0x78/0xa0
> [    3.655294]  drm_atomic_helper_commit_modeset_enables+0x198/0x238
> [    3.655295]  msm_atomic_commit_tail+0x324/0x714
> [    3.655297]  commit_tail+0xa4/0x108
> [    3.664985] usb 1-1.4: new high-speed USB device number 4 using
> xhci-hcd
> [    3.666204]  drm_atomic_helper_commit+0xf4/0xfc
> [    3.666205]  drm_atomic_commit+0x50/0x5c
> [    3.666206]  drm_atomic_helper_set_config+0x64/0x98
> [    3.666208]  drm_mode_setcrtc+0x26c/0x590
> [    3.666209]  drm_ioctl_kernel+0x9c/0x114
> [    3.701074] hub 2-1.4:1.0: USB hub found
> [    3.703347]  drm_ioctl+0x288/0x420
> [    3.703349]  drm_compat_ioctl+0xd0/0xe0
> [    3.703351]  __arm64_compat_sys_ioctl+0x100/0x2108
> [    3.703354]  el0_svc_common+0xa4/0x16c
> [    3.708499] hub 2-1.4:1.0: 4 ports detected
> [    3.711588]  el0_svc_compat_handler+0x2c/0x40
> [    3.711590]  el0_svc_compat+0x8/0x10
> [    3.711591] ---[ end trace 745ead557fcbb5db ]---
> [    3.772120] usb 1-1.4: New USB device found, idVendor=0bda,
> idProduct=5411, bcdDevice= 1.04
> [    3.794990] ti_sn65dsi86 2-002d: [drm:ti_sn_bridge_enable] *ERROR*
> Can't read lane count (-108); assuming 4
>
> [1]
> https://lore.kernel.org/r/20210508075151.1626903-2-swboyd@xxxxxxxxxxxx
>