Re: [PATCH 1/2] staging: iio: cdc: ad7746: clean up driver comments and probe return

[Lucas Stankus]

On Thu, May 13, 2021 at 12:59 PM Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
>
> On Tue, 11 May 2021 17:54:01 -0300
> Lucas Stankus <lucas.p.stankus@xxxxxxxxx> wrote:
>
> > Remove vague comments, align temperature comment with indent block and
> > simplify probe return on device register.
> >
> > Also fix the following checkpatch warning:
> > CHECK: Alignment should match open parenthesis
> >
> > Signed-off-by: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
>
> As Fabio pointed out, finer grained patches with one type of change per
> patch would be good.

Thank you both for the review and sorry for the radio silence, I'll split
the patch in the v2.

>
> > ---
> >  drivers/staging/iio/cdc/ad7746.c | 31 ++++++++++---------------------
> >  1 file changed, 10 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
> > index dfd71e99e872..e03d010b2f4c 100644
> > --- a/drivers/staging/iio/cdc/ad7746.c
> > +++ b/drivers/staging/iio/cdc/ad7746.c
> > @@ -84,10 +84,6 @@
> >  #define AD7746_CAPDAC_DACEN          BIT(7)
> >  #define AD7746_CAPDAC_DACP(x)                ((x) & 0x7F)
> >
> > -/*
> > - * struct ad7746_chip_info - chip specific information
> > - */
> > -
> >  struct ad7746_chip_info {
> >       struct i2c_client *client;
> >       struct mutex lock; /* protect sensor state */
> > @@ -232,13 +228,14 @@ static int ad7746_select_channel(struct iio_dev *indio_dev,
> >
> >               if (chip->capdac_set != chan->channel) {
> >                       ret = i2c_smbus_write_byte_data(chip->client,
> > -                             AD7746_REG_CAPDACA,
> > -                             chip->capdac[chan->channel][0]);
> > +                                                     AD7746_REG_CAPDACA,
> > +                                                     chip->capdac[chan->channel][0]);
> >                       if (ret < 0)
> >                               return ret;
> > +                       ret = i2c_smbus_write_byte_data(chip->client,
> > -                             AD7746_REG_CAPDACB,
> > -                             chip->capdac[chan->channel][1]);
> > +                                                     AD7746_REG_CAPDACB,
> > +                                                     chip->capdac[chan->channel][1]);
> >                       if (ret < 0)
> >                               return ret;
>
> I wondered if it might be sensible to factor this code out to reduce the indent
> and make things more readable.  Having taken a look it seems there is another
> place with exactly the same call sequence.  From how it's used there, I'm
> assuming this is updating the offsets.  As such, I would introduce an
>
> ad7746_offsets_set(struct iio_dev *indio_dev, int channel)
>
> or similar.
>

Makes sense, I'll do that in the v2 as well.

>
> >
> > @@ -564,10 +561,10 @@ static int ad7746_read_raw(struct iio_dev *indio_dev,
> >
> >               switch (chan->type) {
> >               case IIO_TEMP:
> > -             /*
> > -              * temperature in milli degrees Celsius
> > -              * T = ((*val / 2048) - 4096) * 1000
> > -              */
> > +                     /*
> > +                      * temperature in milli degrees Celsius
> > +                      * T = ((*val / 2048) - 4096) * 1000
> > +                      */
> >                       *val = (*val * 125) / 256;
> >                       break;
> >               case IIO_VOLTAGE:
> > @@ -669,10 +666,6 @@ static const struct iio_info ad7746_info = {
> >       .write_raw = ad7746_write_raw,
> >  };
> >
> > -/*
> > - * device probe and remove
> > - */
> > -
> >  static int ad7746_probe(struct i2c_client *client,
> >                       const struct i2c_device_id *id)
> >  {
> > @@ -730,11 +723,7 @@ static int ad7746_probe(struct i2c_client *client,
> >       if (ret < 0)
> >               return ret;
> >
> > -     ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
> > -     if (ret)
> > -             return ret;
> > -
> > -     return 0;
> > +     return devm_iio_device_register(indio_dev->dev.parent, indio_dev);
> >  }
> >
> >  static const struct i2c_device_id ad7746_id[] = {
>