[PATCH 5.4 115/141] usb: xhci: Increase timeout for HC halt

From: Greg Kroah-Hartman
Date: Mon May 17 2021 - 11:33:45 EST


From: Maximilian Luz <luzmaximilian@xxxxxxxxx>

commit ca09b1bea63ab83f4cca3a2ae8bc4f597ec28851 upstream.

On some devices (specifically the SC8180x based Surface Pro X with
QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding
the xhci-hcd driver at some point later does not exhibit this behavior.
To work around this, double XHCI_MAX_HALT_USEC, which also resolves this
issue.

Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Maximilian Luz <luzmaximilian@xxxxxxxxx>
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210512080816.866037-5-mathias.nyman@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/host/xhci-ext-caps.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -7,8 +7,9 @@
* Author: Sarah Sharp
* Some code borrowed from the Linux EHCI driver.
*/
-/* Up to 16 ms to halt an HC */
-#define XHCI_MAX_HALT_USEC (16*1000)
+
+/* HC should halt within 16 ms, but use 32 ms as some hosts take longer */
+#define XHCI_MAX_HALT_USEC (32 * 1000)
/* HC not running - set to 1 when run/stop bit is cleared. */
#define XHCI_STS_HALT (1<<0)