Re: [PATCH v4 08/79] media: atmel: properly get pm_runtime

From: Jonathan Cameron
Date: Fri Apr 30 2021 - 12:15:29 EST


On Wed, 28 Apr 2021 16:51:29 +0200
Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> wrote:

> There are several issues in the way the atmel driver handles
> pm_runtime_get_sync():
>
> - it doesn't check return codes;
> - it doesn't properly decrement the usage_count on all places;
> - it starts streaming even if pm_runtime_get_sync() fails.
> - while it tries to get pm_runtime at the clock enable logic,
> it doesn't check if the operation was suceeded.
>
> Replace all occurrences of it to use the new kAPI:
> pm_runtime_resume_and_get(), which ensures that, if the
> return code is not negative, the usage_count was incremented.
>
> With that, add additional checks when this is called, in order
> to ensure that errors will be properly addressed.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
> ---
> drivers/media/platform/atmel/atmel-isc-base.c | 27 ++++++++++++++-----
> drivers/media/platform/atmel/atmel-isi.c | 19 ++++++++++---
> 2 files changed, 35 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
> index fe3ec8d0eaee..02543fe42e9d 100644
> --- a/drivers/media/platform/atmel/atmel-isc-base.c
> +++ b/drivers/media/platform/atmel/atmel-isc-base.c
> @@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct clk_hw *hw)
> static int isc_clk_prepare(struct clk_hw *hw)
> {
> struct isc_clk *isc_clk = to_isc_clk(hw);
> + int ret;
>
> - if (isc_clk->id == ISC_ISPCK)
> - pm_runtime_get_sync(isc_clk->dev);
> + if (isc_clk->id == ISC_ISPCK) {
> + ret = pm_runtime_resume_and_get(isc_clk->dev);
> + if (ret < 0)
> + return 0;

Why not the error? isc_wait_clk_stable() is happy to return -ETIMEDOUT so I
assume the callers should fine with errors.

> + }
>
> return isc_wait_clk_stable(hw);
> }
> @@ -353,9 +357,13 @@ static int isc_clk_is_enabled(struct clk_hw *hw)
> {
> struct isc_clk *isc_clk = to_isc_clk(hw);
> u32 status;
> + int ret;
>
> - if (isc_clk->id == ISC_ISPCK)
> - pm_runtime_get_sync(isc_clk->dev);
> + if (isc_clk->id == ISC_ISPCK) {
> + ret = pm_runtime_resume_and_get(isc_clk->dev);
> + if (ret < 0)
> + return 0;
> + }
>
> regmap_read(isc_clk->regmap, ISC_CLKSR, &status);
>
> @@ -807,7 +815,9 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
> goto err_start_stream;
> }
>
> - pm_runtime_get_sync(isc->dev);
> + ret = pm_runtime_resume_and_get(isc->dev);
> + if (ret < 0)
> + goto err_pm_get;
>
> ret = isc_configure(isc);
> if (unlikely(ret))
> @@ -838,7 +848,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
>
> err_configure:
> pm_runtime_put_sync(isc->dev);
> -
> +err_pm_get:
> v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0);
>
> err_start_stream:
> @@ -1809,6 +1819,7 @@ static void isc_awb_work(struct work_struct *w)
> u32 baysel;
> unsigned long flags;
> u32 min, max;
> + int ret;
>
> /* streaming is not active anymore */
> if (isc->stop)
> @@ -1831,7 +1842,9 @@ static void isc_awb_work(struct work_struct *w)
> ctrls->hist_id = hist_id;
> baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT;
>
> - pm_runtime_get_sync(isc->dev);
> + ret = pm_runtime_resume_and_get(isc->dev);
> + if (ret < 0)

Maybe warn or similar?

> + return;
>
> /*
> * only update if we have all the required histograms and controls
> diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c
> index 0514be6153df..6a433926726d 100644
> --- a/drivers/media/platform/atmel/atmel-isi.c
> +++ b/drivers/media/platform/atmel/atmel-isi.c
> @@ -422,7 +422,9 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
> struct frame_buffer *buf, *node;
> int ret;
>
> - pm_runtime_get_sync(isi->dev);
> + ret = pm_runtime_resume_and_get(isi->dev);
> + if (ret < 0)
> + return ret;
>
> /* Enable stream on the sub device */
> ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1);
> @@ -782,9 +784,10 @@ static int isi_enum_frameintervals(struct file *file, void *fh,
> return 0;
> }
>
> -static void isi_camera_set_bus_param(struct atmel_isi *isi)
> +static int isi_camera_set_bus_param(struct atmel_isi *isi)
> {
> u32 cfg1 = 0;
> + int ret;
>
> /* set bus param for ISI */
> if (isi->pdata.hsync_act_low)
> @@ -801,12 +804,16 @@ static void isi_camera_set_bus_param(struct atmel_isi *isi)
> cfg1 |= ISI_CFG1_THMASK_BEATS_16;
>
> /* Enable PM and peripheral clock before operate isi registers */
> - pm_runtime_get_sync(isi->dev);
> + ret = pm_runtime_resume_and_get(isi->dev);
> + if (ret < 0)
> + return ret;
>
> isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
> isi_writel(isi, ISI_CFG1, cfg1);
>
> pm_runtime_put(isi->dev);
> +
> + return 0;
> }
>
> /* -----------------------------------------------------------------------*/
> @@ -1085,7 +1092,11 @@ static int isi_graph_notify_complete(struct v4l2_async_notifier *notifier)
> dev_err(isi->dev, "No supported mediabus format found\n");
> return ret;
> }
> - isi_camera_set_bus_param(isi);
> + ret = isi_camera_set_bus_param(isi);
> + if (ret) {
> + dev_err(isi->dev, "Can't wake up device\n");
> + return ret;
> + }
>
> ret = isi_set_default_fmt(isi);
> if (ret) {