Re: [PATCH v6 9/9] KVM: selftests: aarch64/vgic-v3 init sequence tests

From: Auger Eric
Date: Wed Apr 07 2021 - 06:15:32 EST

Next message: riteshh: "Re: [PATCH 1/3] fsdax: Factor helpers to simplify dax fault code"
Previous message: Andy Shevchenko: "[PATCH v2 1/1] defconfig: enable SERIAL_SH_SCI"
In reply to: Marc Zyngier: "Re: [PATCH v6 9/9] KVM: selftests: aarch64/vgic-v3 init sequence tests"
Next in thread: Andrew Jones: "Re: [PATCH v6 9/9] KVM: selftests: aarch64/vgic-v3 init sequence tests"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Drew,

On 4/6/21 5:09 PM, Andrew Jones wrote:
>
> Hi Eric,
>
> It looks like Marc already picked this patch up, but, FWIW, here's
> a few more comments you may consider.

I will send a fixup patch on top of the one taken my Marc. Few comments
below.
>
> On Mon, Apr 05, 2021 at 06:39:41PM +0200, Eric Auger wrote:
>> The tests exercise the VGIC_V3 device creation including the
>> associated KVM_DEV_ARM_VGIC_GRP_ADDR group attributes:
>>
>> - KVM_VGIC_V3_ADDR_TYPE_DIST/REDIST
>> - KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION
>>
>> Some other tests dedicate to KVM_DEV_ARM_VGIC_GRP_REDIST_REGS group
>> and especially the GICR_TYPER read. The goal was to test the case
>> recently fixed by commit 23bde34771f1
>> ("KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace").
>>
>> The API under test can be found at
>> Documentation/virt/kvm/devices/arm-vgic-v3.rst
>>
>> Signed-off-by: Eric Auger <eric.auger@xxxxxxxxxx>
>>
>> ---
>>
>> v4 -> v5:
>> - simplify the last bit tests given the simpler interpretation
>> of the spec
>>
>> v3 -> v4:
>> - update .gitignore
>> - More vgic-mmio-v3.c change into the previous patch
>> - rename fuzz_dist_rdist into test_dist_rdist
>> - cleanup in run_vcpu and guest_code
>> - max_ipa_bits is global
>> - s/fuzz/subtest
>> - added test_kvm_device,
>> - moved ucall_init() just before the cpu run
>> - use vm_create_default_with_vcpus
>> - use vm_gic struct, vm_gic_create, vm_gic_destroy
>> - revwrite util.c helpers to comply with the usual style
>> ---
>> tools/testing/selftests/kvm/.gitignore | 1 +
>> tools/testing/selftests/kvm/Makefile | 1 +
>> .../testing/selftests/kvm/aarch64/vgic_init.c | 585 ++++++++++++++++++
>> .../testing/selftests/kvm/include/kvm_util.h | 9 +
>> tools/testing/selftests/kvm/lib/kvm_util.c | 77 +++
>> 5 files changed, 673 insertions(+)
>> create mode 100644 tools/testing/selftests/kvm/aarch64/vgic_init.c
>>
>> diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore
>> index 7bd7e776c266..bb862f91f640 100644
>> --- a/tools/testing/selftests/kvm/.gitignore
>> +++ b/tools/testing/selftests/kvm/.gitignore
>> @@ -1,6 +1,7 @@
>> # SPDX-License-Identifier: GPL-2.0-only
>> /aarch64/get-reg-list
>> /aarch64/get-reg-list-sve
>> +/aarch64/vgic_init
>> /s390x/memop
>> /s390x/resets
>> /s390x/sync_regs_test
>> diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile
>> index 67eebb53235f..2fd4801de9ca 100644
>> --- a/tools/testing/selftests/kvm/Makefile
>> +++ b/tools/testing/selftests/kvm/Makefile
>> @@ -78,6 +78,7 @@ TEST_GEN_PROGS_x86_64 += steal_time
>>
>> TEST_GEN_PROGS_aarch64 += aarch64/get-reg-list
>> TEST_GEN_PROGS_aarch64 += aarch64/get-reg-list-sve
>> +TEST_GEN_PROGS_aarch64 += aarch64/vgic_init
>> TEST_GEN_PROGS_aarch64 += demand_paging_test
>> TEST_GEN_PROGS_aarch64 += dirty_log_test
>> TEST_GEN_PROGS_aarch64 += dirty_log_perf_test
>> diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c
>> new file mode 100644
>> index 000000000000..be1a7c0d0527
>> --- /dev/null
>> +++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c
>> @@ -0,0 +1,585 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * vgic init sequence tests
>> + *
>> + * Copyright (C) 2020, Red Hat, Inc.
>> + */
>> +#define _GNU_SOURCE
>> +#include <linux/kernel.h>
>> +#include <sys/syscall.h>
>> +#include <asm/kvm.h>
>> +#include <asm/kvm_para.h>
>> +
>> +#include "test_util.h"
>> +#include "kvm_util.h"
>> +#include "processor.h"
>> +
>> +#define NR_VCPUS 4
>> +
>> +#define REDIST_REGION_ATTR_ADDR(count, base, flags, index) (((uint64_t)(count) << 52) | \
>> + ((uint64_t)((base) >> 16) << 16) | ((uint64_t)(flags) << 12) | index)
>> +#define REG_OFFSET(vcpu, offset) (((uint64_t)vcpu << 32) | offset)
>> +
>> +#define GICR_TYPER 0x8
>> +
>> +struct vm_gic {
>> + struct kvm_vm *vm;
>> + int gic_fd;
>> +};
>> +
>> +int max_ipa_bits;
>
> static
done
>
>> +
>> +/* helper to access a redistributor register */
>> +static int access_redist_reg(int gicv3_fd, int vcpu, int offset,
>> + uint32_t *val, bool write)
>> +{
>> + uint64_t attr = REG_OFFSET(vcpu, offset);
>> +
>> + return _kvm_device_access(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS,
>> + attr, val, write);
>> +}
>> +
>> +/* dummy guest code */
>> +static void guest_code(void)
>> +{
>> + GUEST_SYNC(0);
>> + GUEST_SYNC(1);
>> + GUEST_SYNC(2);
>> + GUEST_DONE();
>> +}
>> +
>> +/* we don't want to assert on run execution, hence that helper */
>> +static int run_vcpu(struct kvm_vm *vm, uint32_t vcpuid)
>> +{
>> + int ret;
>> +
>> + vcpu_args_set(vm, vcpuid, 1);
>
> You don't need the above vcpu_args_set call since guest_code doesn't take
> any arguments.
ok
>
>> + ret = _vcpu_ioctl(vm, vcpuid, KVM_RUN, NULL);
>> + get_ucall(vm, vcpuid, NULL);
>
> You're not checking the result of get_ucall, so there's no need for the
> call.
removed
>
>> +
>> + if (ret)
>> + return -errno;
>> + return 0;
>> +}
>> +
>> +static struct vm_gic vm_gic_create(void)
>> +{
>> + struct vm_gic v;
>> +
>> + v.vm = vm_create_default_with_vcpus(NR_VCPUS, 0, 0, guest_code, NULL);
>> + v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false);
>> + TEST_ASSERT(v.gic_fd > 0, "GICv3 device created");
>
> Why > 0? And why the assert here when you already have one for >= 0 in
> kvm_create_device?
removed
>
>> +
>> + return v;
>> +}
>> +
>> +static void vm_gic_destroy(struct vm_gic *v)
>> +{
>> + close(v->gic_fd);
>> + kvm_vm_free(v->vm);
>> +}
>> +
>> +/**
>> + * Helper routine that performs KVM device tests in general and
>> + * especially ARM_VGIC_V3 ones. Eventually the ARM_VGIC_V3
>> + * device gets created, a legacy RDIST region is set at @0x0
>> + * and a DIST region is set @0x60000
>> + */
>> +static void subtest_dist_rdist(struct vm_gic *v)
>> +{
>> + int ret;
>> + uint64_t addr;
>> +
>> + /* Check existing group/attributes */
>> + ret = _kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_DIST);
>> + TEST_ASSERT(!ret, "KVM_DEV_ARM_VGIC_GRP_ADDR/KVM_VGIC_V3_ADDR_TYPE_DIST supported");
>
> Assert is too harsh here. A SKIP on ENODEV would be better, because these
> tests will also get run on gicv2 machines where the lack of gicv3 is not a
> bug. If all the tests in this file are v3 specific, then please put this
> check+skip in main.
In test_kvm_device() I do
>> +
>> + /* trial mode with VGIC_V3 device */
>> + ret = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, true);
>> + if (ret) {
>> + print_skip("GICv3 not supported");
>> + exit(KSFT_SKIP);
>> + }

I tested the kvm selftests on Seattle and the test is skipped.

However I can repace _ prefixed calls by standard calls here.
>
>> +
>> + ret = _kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST);
>> + TEST_ASSERT(!ret, "KVM_DEV_ARM_VGIC_GRP_ADDR/KVM_VGIC_V3_ADDR_TYPE_REDIST supported");
>
> Assert is OK now, since if there's a V3 _DIST, there must be a V3 _REDIST.
replaced by kvm_device_check_attr() call
>
>> +
>> + /* check non existing attribute */
>> + ret = _kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, 0);
>> + TEST_ASSERT(ret == -ENXIO, "attribute not supported");
>> +
>> + /* misaligned DIST and REDIST address settings */
>> + addr = 0x1000;
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_DIST, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "GICv3 dist base not 64kB aligned");
>> +
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "GICv3 redist base not 64kB aligned");
>> +
>> + /* out of range address */
>> + if (max_ipa_bits) {
>> + addr = 1ULL << max_ipa_bits;
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_DIST, &addr, true);
>> + TEST_ASSERT(ret == -E2BIG, "dist address beyond IPA limit");
>> +
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true);
>> + TEST_ASSERT(ret == -E2BIG, "redist address beyond IPA limit");
>> + }
>> +
>> + /* set REDIST base address @0x0*/
>> + addr = 0x00000;
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true);
>> + TEST_ASSERT(!ret, "GICv3 redist base set");
>> +
>> + /* Attempt to create a second legacy redistributor region */
>> + addr = 0xE0000;
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true);
>> + TEST_ASSERT(ret == -EEXIST, "GICv3 redist base set again");
>> +
>> + /* Attempt to mix legacy and new redistributor regions */
>> + addr = REDIST_REGION_ATTR_ADDR(NR_VCPUS, 0x100000, 0, 0);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "attempt to mix GICv3 REDIST and REDIST_REGION");
>> +
>> + /*
>> + * Set overlapping DIST / REDIST, cannot be detected here. Will be detected
>> + * on first vcpu run instead.
>> + */
>> + addr = 3 * 2 * 0x10000;
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_V3_ADDR_TYPE_DIST,
>> + &addr, true);
>> + TEST_ASSERT(!ret, "dist overlapping rdist");
>> +}
>> +
>> +/* Test the new REDIST region API */
>> +static void subtest_redist_regions(struct vm_gic *v)
>> +{
>> + uint64_t addr, expected_addr;
>> + int ret;
>> +
>> + ret = kvm_device_check_attr(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST);
>> + TEST_ASSERT(!ret, "Multiple redist regions advertised");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(NR_VCPUS, 0x100000, 2, 0);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "redist region attr value with flags != 0");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(0, 0x100000, 0, 0);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "redist region attr value with count== 0");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 1);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "attempt to register the first rdist region with index != 0");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(2, 0x201000, 0, 1);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "rdist region with misaligned address");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 0);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(!ret, "First valid redist region with 2 rdist @ 0x200000, index 0");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 1);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "register an rdist region with already used index");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(1, 0x210000, 0, 2);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "register an rdist region overlapping with another one");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(1, 0x240000, 0, 2);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "register redist region with index not +1");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(1, 0x240000, 0, 1);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(!ret, "register valid redist region with 1 rdist @ 0x220000, index 1");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(1, 1ULL << max_ipa_bits, 0, 2);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(ret == -E2BIG, "register redist region with base address beyond IPA range");
>> +
>> + addr = 0x260000;
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "Mix KVM_VGIC_V3_ADDR_TYPE_REDIST and REDIST_REGION");
>> +
>> + /*
>> + * Now there are 2 redist regions:
>> + * region 0 @ 0x200000 2 redists
>> + * region 1 @ 0x240000 1 redist
>> + * Attempt to read their characteristics
>> + */
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(0, 0, 0, 0);
>> + expected_addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 0);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, false);
>> + TEST_ASSERT(!ret && addr == expected_addr, "read characteristics of region #0");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(0, 0, 0, 1);
>> + expected_addr = REDIST_REGION_ATTR_ADDR(1, 0x240000, 0, 1);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, false);
>> + TEST_ASSERT(!ret && addr == expected_addr, "read characteristics of region #1");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(0, 0, 0, 2);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, false);
>> + TEST_ASSERT(ret == -ENOENT, "read characteristics of non existing region");
>> +
>> + addr = 0x260000;
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_DIST, &addr, true);
>> + TEST_ASSERT(!ret, "set dist region");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(1, 0x260000, 0, 2);
>> + ret = _kvm_device_access(v->gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "register redist region colliding with dist");
>> +}
>> +
>> +/*
>> + * VGIC KVM device is created and initialized before the secondary CPUs
>> + * get created
>> + */
>> +static void test_vgic_then_vcpus(void)
>> +{
>> + struct vm_gic v;
>> + int ret, i;
>> +
>> + v.vm = vm_create_default(0, 0, guest_code);
>> + v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false);
>> + TEST_ASSERT(v.gic_fd > 0, "GICv3 device created");
>> +
>> + subtest_dist_rdist(&v);
>> +
>> + /* Add the rest of the VCPUs */
>> + for (i = 1; i < NR_VCPUS; ++i)
>> + vm_vcpu_add_default(v.vm, i, guest_code);
>> +
>> + ucall_init(v.vm, NULL);
>> + ret = run_vcpu(v.vm, 3);
>> + TEST_ASSERT(ret == -EINVAL, "dist/rdist overlap detected on 1st vcpu run");
>> +
>> + vm_gic_destroy(&v);
>> +}
>> +
>> +/* All the VCPUs are created before the VGIC KVM device gets initialized */
>> +static void test_vcpus_then_vgic(void)
>> +{
>> + struct vm_gic v;
>> + int ret;
>> +
>> + v = vm_gic_create();
>> +
>> + subtest_dist_rdist(&v);
>> +
>> + ucall_init(v.vm, NULL);
>> + ret = run_vcpu(v.vm, 3);
>> + TEST_ASSERT(ret == -EINVAL, "dist/rdist overlap detected on 1st vcpu run");
>> +
>> + vm_gic_destroy(&v);
>> +}
>> +
>> +static void test_new_redist_regions(void)
>> +{
>> + void *dummy = NULL;
>> + struct vm_gic v;
>> + uint64_t addr;
>> + int ret;
>> +
>> + v = vm_gic_create();
>> + subtest_redist_regions(&v);
>> + ret = _kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
>> + KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true);
>> + TEST_ASSERT(!ret, "init the vgic");
>> +
>> + ucall_init(v.vm, NULL);
>> + ret = run_vcpu(v.vm, 3);
>> + TEST_ASSERT(ret == -ENXIO, "running without sufficient number of rdists");
>> + vm_gic_destroy(&v);
>> +
>> + /* step2 */
>> +
>> + v = vm_gic_create();
>> + subtest_redist_regions(&v);
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(1, 0x280000, 0, 2);
>> + ret = _kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(!ret, "register a third region allowing to cover the 4 vcpus");
>> +
>> + ucall_init(v.vm, NULL);
>> + ret = run_vcpu(v.vm, 3);
>
> Looks like ucall_init could be put in run_vcpu.
done
>
>> + TEST_ASSERT(ret == -EBUSY, "running without vgic explicit init");
>> +
>> + vm_gic_destroy(&v);
>> +
>> + /* step 3 */
>> +
>> + v = vm_gic_create();
>> + subtest_redist_regions(&v);
>> +
>> + ret = _kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, dummy, true);
>> + TEST_ASSERT(ret == -EFAULT, "register a third region allowing to cover the 4 vcpus");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(1, 0x280000, 0, 2);
>> + ret = _kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(!ret, "register a third region allowing to cover the 4 vcpus");
>> +
>> + ret = _kvm_device_access(v.gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
>> + KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true);
>> + TEST_ASSERT(!ret, "init the vgic");
>> +
>> + ucall_init(v.vm, NULL);
>> + ret = run_vcpu(v.vm, 3);
>> + TEST_ASSERT(!ret, "vcpu run");
>> +
>> + vm_gic_destroy(&v);
>> +}
>> +
>> +static void test_typer_accesses(void)
>> +{
>> + int ret, i, gicv3_fd = -1;
>> + uint64_t addr;
>> + struct kvm_vm *vm;
>> + uint32_t val;
>> +
>> + vm = vm_create_default(0, 0, guest_code);
>> +
>> + gicv3_fd = kvm_create_device(vm, KVM_DEV_TYPE_ARM_VGIC_V3, false);
>> + TEST_ASSERT(gicv3_fd >= 0, "VGIC_V3 device created");
>> +
>> + vm_vcpu_add_default(vm, 3, guest_code);
>> +
>> + ret = access_redist_reg(gicv3_fd, 1, GICR_TYPER, &val, false);
>> + TEST_ASSERT(ret == -EINVAL, "attempting to read GICR_TYPER of non created vcpu");
>> +
>> + vm_vcpu_add_default(vm, 1, guest_code);
>> +
>> + ret = access_redist_reg(gicv3_fd, 1, GICR_TYPER, &val, false);
>> + TEST_ASSERT(ret == -EBUSY, "read GICR_TYPER before GIC initialized");
>> +
>> + vm_vcpu_add_default(vm, 2, guest_code);
>> +
>> + ret = _kvm_device_access(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
>> + KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true);
>> + TEST_ASSERT(!ret, "init the vgic after the vcpu creations");
>> +
>> + for (i = 0; i < NR_VCPUS ; i++) {
>> + ret = access_redist_reg(gicv3_fd, 0, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && !val, "read GICR_TYPER before rdist region setting");
>> + }
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 0);
>> + ret = _kvm_device_access(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(!ret, "first rdist region with a capacity of 2 rdists");
>> +
>> + /* The 2 first rdists should be put there (vcpu 0 and 3) */
>> + ret = access_redist_reg(gicv3_fd, 0, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && !val, "read typer of rdist #0");
>> +
>> + ret = access_redist_reg(gicv3_fd, 3, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x310, "read typer of rdist #1");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(10, 0x100000, 0, 1);
>> + ret = _kvm_device_access(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(ret == -EINVAL, "collision with previous rdist region");
>> +
>> + ret = access_redist_reg(gicv3_fd, 1, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x100,
>> + "no redist region attached to vcpu #1 yet, last cannot be returned");
>> +
>> + ret = access_redist_reg(gicv3_fd, 2, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x200,
>> + "no redist region attached to vcpu #2, last cannot be returned");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(10, 0x20000, 0, 1);
>> + ret = _kvm_device_access(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(!ret, "second rdist region");
>> +
>> + ret = access_redist_reg(gicv3_fd, 1, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x100, "read typer of rdist #1");
>> +
>> + ret = access_redist_reg(gicv3_fd, 2, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x210,
>> + "read typer of rdist #1, last properly returned");
>> +
>> + close(gicv3_fd);
>> + kvm_vm_free(vm);
>> +}
>> +
>> +/**
>> + * Test GICR_TYPER last bit with new redist regions
>> + * rdist regions #1 and #2 are contiguous
>> + * rdist region #0 @0x100000 2 rdist capacity
>> + * rdists: 0, 3 (Last)
>> + * rdist region #1 @0x240000 2 rdist capacity
>> + * rdists: 5, 4 (Last)
>> + * rdist region #2 @0x200000 2 rdist capacity
>> + * rdists: 1, 2
>> + */
>> +static void test_last_bit_redist_regions(void)
>> +{
>> + uint32_t vcpuids[] = { 0, 3, 5, 4, 1, 2 };
>> + int ret, gicv3_fd;
>> + uint64_t addr;
>> + struct kvm_vm *vm;
>> + uint32_t val;
>> +
>> + vm = vm_create_default_with_vcpus(6, 0, 0, guest_code, vcpuids);
>> +
>> + gicv3_fd = kvm_create_device(vm, KVM_DEV_TYPE_ARM_VGIC_V3, false);
>> + TEST_ASSERT(gicv3_fd >= 0, "VGIC_V3 device created");
>> +
>> + ret = _kvm_device_access(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
>> + KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true);
>> + TEST_ASSERT(!ret, "init the vgic after the vcpu creations");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(2, 0x100000, 0, 0);
>> + ret = _kvm_device_access(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(!ret, "rdist region #0 (2 rdist)");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(2, 0x240000, 0, 1);
>> + ret = _kvm_device_access(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(!ret, "rdist region #1 (1 rdist) contiguous with #2");
>> +
>> + addr = REDIST_REGION_ATTR_ADDR(2, 0x200000, 0, 2);
>> + ret = _kvm_device_access(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &addr, true);
>> + TEST_ASSERT(!ret, "rdist region #2 with a capacity of 2 rdists");
>> +
>> + ret = access_redist_reg(gicv3_fd, 0, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x000, "read typer of rdist #0");
>> +
>> + ret = access_redist_reg(gicv3_fd, 1, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x100, "read typer of rdist #1");
>> +
>> + ret = access_redist_reg(gicv3_fd, 2, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x200, "read typer of rdist #2");
>> +
>> + ret = access_redist_reg(gicv3_fd, 3, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x310, "read typer of rdist #3");
>> +
>> + ret = access_redist_reg(gicv3_fd, 5, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x500, "read typer of rdist #5");
>> +
>> + ret = access_redist_reg(gicv3_fd, 4, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x410, "read typer of rdist #4");
>> +
>> + close(gicv3_fd);
>> + kvm_vm_free(vm);
>
> Seems like sometimes we use the vm_gic_create/destroy and sometimes we
> don't... Maybe vm_gic_create needs to be more flexible. Or at least
> the struct could be used more often like test_kvm_device does below.
ok, I used the vm_gic structure in different places
>
>> +}
>> +
>> +/* Test last bit with legacy region */
>> +static void test_last_bit_single_rdist(void)
>> +{
>> + uint32_t vcpuids[] = { 0, 3, 5, 4, 1, 2 };
>> + int ret, gicv3_fd;
>> + uint64_t addr;
>> + struct kvm_vm *vm;
>> + uint32_t val;
>> +
>> + vm = vm_create_default_with_vcpus(6, 0, 0, guest_code, vcpuids);
>> +
>> + gicv3_fd = kvm_create_device(vm, KVM_DEV_TYPE_ARM_VGIC_V3, false);
>> + TEST_ASSERT(gicv3_fd >= 0, "VGIC_V3 device created");
>> +
>> + ret = _kvm_device_access(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
>> + KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true);
>> + TEST_ASSERT(!ret, "init the vgic after the vcpu creations");
>> +
>> + addr = 0x10000;
>> + ret = _kvm_device_access(gicv3_fd, KVM_DEV_ARM_VGIC_GRP_ADDR,
>> + KVM_VGIC_V3_ADDR_TYPE_REDIST, &addr, true);
>> +
>> + ret = access_redist_reg(gicv3_fd, 0, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x000, "read typer of rdist #0");
>> +
>> + ret = access_redist_reg(gicv3_fd, 3, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x300, "read typer of rdist #1");
>> +
>> + ret = access_redist_reg(gicv3_fd, 5, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x500, "read typer of rdist #2");
>> +
>> + ret = access_redist_reg(gicv3_fd, 1, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x100, "read typer of rdist #3");
>> +
>> + ret = access_redist_reg(gicv3_fd, 2, GICR_TYPER, &val, false);
>> + TEST_ASSERT(!ret && val == 0x210, "read typer of rdist #3");
>> +
>> + close(gicv3_fd);
>> + kvm_vm_free(vm);
>> +}
>> +
>> +void test_kvm_device(void)
>> +{
>> + struct vm_gic v;
>> + int ret;
>> +
>> + v.vm = vm_create_default_with_vcpus(NR_VCPUS, 0, 0, guest_code, NULL);
>> +
>> + /* try to create a non existing KVM device */
>> + ret = _kvm_create_device(v.vm, 0, true);
>> + TEST_ASSERT(ret == -ENODEV, "unsupported device");
>> +
>> + /* trial mode with VGIC_V3 device */
>> + ret = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, true);
>> + if (ret) {
>> + print_skip("GICv3 not supported");
>> + exit(KSFT_SKIP);
>> + }
>> + v.gic_fd = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false);
>> + TEST_ASSERT(v.gic_fd, "create the GICv3 device");
>> +
>> + ret = _kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, false);
>> + TEST_ASSERT(ret == -EEXIST, "create GICv3 device twice");
>> +
>> + ret = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V3, true);
>> + TEST_ASSERT(!ret, "create GICv3 in test mode while the same already is created");
>> +
>> + if (!_kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V2, true)) {
>> + ret = kvm_create_device(v.vm, KVM_DEV_TYPE_ARM_VGIC_V2, false);
>> + TEST_ASSERT(ret == -EINVAL, "create GICv2 while v3 exists");
>> + }
>> +
>> + vm_gic_destroy(&v);
>> +}
>> +
>> +int main(int ac, char **av)
>> +{
>> + max_ipa_bits = kvm_check_cap(KVM_CAP_ARM_VM_IPA_SIZE);
>> +
>> + test_kvm_device();
>> + test_vcpus_then_vgic();
>> + test_vgic_then_vcpus();
>> + test_new_redist_regions();
>> + test_typer_accesses();
>> + test_last_bit_redist_regions();
>> + test_last_bit_single_rdist();
>> +
>> + return 0;
>> +}
>> +
>> diff --git a/tools/testing/selftests/kvm/include/kvm_util.h b/tools/testing/selftests/kvm/include/kvm_util.h
>> index 0f4258eaa629..2b4b325cde01 100644
>> --- a/tools/testing/selftests/kvm/include/kvm_util.h
>> +++ b/tools/testing/selftests/kvm/include/kvm_util.h
>> @@ -225,6 +225,15 @@ int vcpu_nested_state_set(struct kvm_vm *vm, uint32_t vcpuid,
>> #endif
>> void *vcpu_map_dirty_ring(struct kvm_vm *vm, uint32_t vcpuid);
>>
>> +int _kvm_device_check_attr(int dev_fd, uint32_t group, uint64_t attr);
>> +int kvm_device_check_attr(int dev_fd, uint32_t group, uint64_t attr);
>> +int _kvm_create_device(struct kvm_vm *vm, uint64_t type, bool test);
>> +int kvm_create_device(struct kvm_vm *vm, uint64_t type, bool test);
>> +int _kvm_device_access(int dev_fd, uint32_t group, uint64_t attr,
>> + void *val, bool write);
>> +int kvm_device_access(int dev_fd, uint32_t group, uint64_t attr,
>> + void *val, bool write);
>> +
>> const char *exit_reason_str(unsigned int exit_reason);
>>
>> void virt_pgd_alloc(struct kvm_vm *vm, uint32_t pgd_memslot);
>> diff --git a/tools/testing/selftests/kvm/lib/kvm_util.c b/tools/testing/selftests/kvm/lib/kvm_util.c
>> index b8849a1aca79..db2a252be917 100644
>> --- a/tools/testing/selftests/kvm/lib/kvm_util.c
>> +++ b/tools/testing/selftests/kvm/lib/kvm_util.c
>> @@ -1733,6 +1733,83 @@ int _kvm_ioctl(struct kvm_vm *vm, unsigned long cmd, void *arg)
>> return ioctl(vm->kvm_fd, cmd, arg);
>> }
>>
>> +/*
>> + * Device Ioctl
>> + */
>> +
>> +int _kvm_device_check_attr(int dev_fd, uint32_t group, uint64_t attr)
>> +{
>> + struct kvm_device_attr attribute = {
>> + .group = group,
>> + .attr = attr,
>> + .flags = 0,
>> + };
>> + int ret = ioctl(dev_fd, KVM_HAS_DEVICE_ATTR, &attribute);
>> +
>> + if (ret == -1)
>> + return -errno;
>
> This still doesn't follow our pattern for the underscore prefixed ioctl
> wrapping functions. Those functions pass back the return code as received.
> The callers check errno themselves per the return code, e.g. if it's -1.
> Take a look at _vcpu_run, for example.
OK
>
>> + return 0;
>> +}
>> +
>> +int kvm_device_check_attr(int dev_fd, uint32_t group, uint64_t attr)
>> +{
>> + int ret = _kvm_device_check_attr(dev_fd, group, attr);
>> +
>> + TEST_ASSERT(ret >= 0, "KVM_HAS_DEVICE_ATTR failed, errno: %i", errno);
>> + return ret;
>> +}
>> +
>> +int _kvm_create_device(struct kvm_vm *vm, uint64_t type, bool test)
>> +{
>> + struct kvm_create_device create_dev;
>> + int ret;
>> +
>> + create_dev.type = type;
>> + create_dev.fd = -1;
>> + create_dev.flags = test ? KVM_CREATE_DEVICE_TEST : 0;
>> + ret = ioctl(vm_get_fd(vm), KVM_CREATE_DEVICE, &create_dev);
>> + if (ret == -1)
>> + return -errno;
>> + return test ? 0 : create_dev.fd;
>
> Something like this belongs in the non underscore prefixed wrappers.
I need at least to return the create_dev.fd or do you want me to add an
extra int *fd parameter?
What about:

if (ret < 0)
return ret;
return test ? 0 : create_dev.fd;

>
>> +}
>> +
>> +int kvm_create_device(struct kvm_vm *vm, uint64_t type, bool test)
>> +{
>> + int ret = _kvm_create_device(vm, type, test);
>> +
>> + TEST_ASSERT(ret >= 0, "KVM_CREATE_DEVICE IOCTL failed,\n"
>> + " errno: %i", errno);
>> + return ret;
>> +}
>> +
>> +int _kvm_device_access(int dev_fd, uint32_t group, uint64_t attr,
>> + void *val, bool write)
>> +{
>> + struct kvm_device_attr kvmattr = {
>> + .group = group,
>> + .attr = attr,
>> + .flags = 0,
>> + .addr = (uintptr_t)val,
>> + };
>> + int ret;
>> +
>> + ret = ioctl(dev_fd, write ? KVM_SET_DEVICE_ATTR : KVM_GET_DEVICE_ATTR,
>> + &kvmattr);
>> + if (ret < 0)
>> + return -errno;
>> + return ret;
>> +}
>> +
>> +int kvm_device_access(int dev_fd, uint32_t group, uint64_t attr,
>> + void *val, bool write)
>> +{
>> + int ret = _kvm_device_access(dev_fd, group, attr, val, write);
>> +
>> + TEST_ASSERT(ret >= 0, "KVM_SET|GET_DEVICE_ATTR IOCTL failed,\n"
>> + " errno: %i", errno);
>> + return ret;
>> +}
>> +
>> /*
>> * VM Dump
>> *
>> --
>> 2.26.3
>>
>
> Thanks,
> drew
>
Thanks

Eric

Next message: riteshh: "Re: [PATCH 1/3] fsdax: Factor helpers to simplify dax fault code"
Previous message: Andy Shevchenko: "[PATCH v2 1/1] defconfig: enable SERIAL_SH_SCI"
In reply to: Marc Zyngier: "Re: [PATCH v6 9/9] KVM: selftests: aarch64/vgic-v3 init sequence tests"
Next in thread: Andrew Jones: "Re: [PATCH v6 9/9] KVM: selftests: aarch64/vgic-v3 init sequence tests"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]