RE: [PATCH net-next] net: intel: Enable SERDES PHY rx clk for PSE

[Wong, Vee Khee]

On Tue, Apr 06, 2021 at 12:33:57AM +0800, Voon Weifeng wrote: 
>
> EHL PSE SGMII mode requires to ungate the SERDES PHY rx clk for power up
> sequence and vice versa.
> 
> Signed-off-by: Voon Weifeng <weifeng.voon@xxxxxxxxx>
> ---
>  drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 10 ++++++++++
>  drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h |  1 +
>  2 files changed, 11 insertions(+)
> 

Why not use "stmmac: intel" for the commit message header?


> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> index add95e20548d..a4fec5fe0779 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> @@ -153,6 +153,11 @@ static int intel_serdes_powerup(struct net_device
> *ndev, void *priv_data)
>  		return data;
>  	}
> 
> +	/* PSE only - ungate SGMII PHY Rx Clock */
> +	if (intel_priv->is_pse)
> +		mdiobus_modify(priv->mii, serdes_phy_addr, SERDES_GCR0,
> +			       0, SERDES_PHY_RX_CLK);
> +
>  	return 0;
>  }
> 
> @@ -168,6 +173,11 @@ static void intel_serdes_powerdown(struct
> net_device *ndev, void *intel_data)
> 
>  	serdes_phy_addr = intel_priv->mdio_adhoc_addr;
> 
> +	/* PSE only - gate SGMII PHY Rx Clock */
> +	if (intel_priv->is_pse)
> +		mdiobus_modify(priv->mii, serdes_phy_addr, SERDES_GCR0,
> +			       SERDES_PHY_RX_CLK, 0);
> +
>  	/*  move power state to P3 */
>  	data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0);
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
> b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
> index e723096c0b15..542acb8ce467 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h
> @@ -14,6 +14,7 @@
> 
>  /* SERDES defines */
>  #define SERDES_PLL_CLK		BIT(0)		/* PLL clk valid signal
> */
> +#define SERDES_PHY_RX_CLK	BIT(1)		/* PSE SGMII PHY rx clk */
>  #define SERDES_RST		BIT(2)		/* Serdes Reset */
>  #define SERDES_PWR_ST_MASK	GENMASK(6, 4)	/* Serdes Power
> state*/
>  #define SERDES_PWR_ST_SHIFT	4
> --
> 2.17.1