[PATCH 10/10] staging: rtl8723bs: remove commented code block

From: Fabio Aiuto
Date: Mon Apr 05 2021 - 12:50:43 EST


remove commented 5G code block in hal/hal_com_phycfg.c
which contained removed RT_TRACE log

as reported in the driver's TODO file:

- find and remove remaining code valid only for 5 GHz.
Most of the obvious ones have been removed,
but things like channel > 14 still exist.

so just removed obsolete commented code.

Suggested-by: Joe Perches <joe@xxxxxxxxxxx>
Signed-off-by: Fabio Aiuto <fabioaiuto83@xxxxxxxxx>
---
.../staging/rtl8723bs/hal/hal_com_phycfg.c | 19 -------------------
1 file changed, 19 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c b/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
index f52cc4e7a6e6..a7ecdf501a14 100644
--- a/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
+++ b/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
@@ -1780,25 +1780,6 @@ s8 phy_get_tx_pwr_lmt(struct adapter *adapter, u32 reg_pwr_tbl_sel,
DBG_871X("No power limit table of the specified band\n");
}

- /* combine 5G VHT & HT rate */
- /* 5G 20M and 40M HT and VHT can cross reference */
- /*
- if (band_type == BAND_ON_5G && pwr_lmt == MAX_POWER_INDEX) {
- if (idx_bandwidth == 0 || idx_bandwidth == 1) {
- idx_band, idx_bandwidth,
- idx_rate_sctn, rf_path));
- if (idx_rate_sctn == 2)
- pwr_lmt = hal_data->TxPwrLimit_5G[idx_regulation][idx_bandwidth][4][idx_channel][rf_path];
- else if (idx_rate_sctn == 4)
- pwr_lmt = hal_data->TxPwrLimit_5G[idx_regulation][idx_bandwidth][2][idx_channel][rf_path];
- else if (idx_rate_sctn == 3)
- pwr_lmt = hal_data->TxPwrLimit_5G[idx_regulation][idx_bandwidth][5][idx_channel][rf_path];
- else if (idx_rate_sctn == 5)
- pwr_lmt = hal_data->TxPwrLimit_5G[idx_regulation][idx_bandwidth][3][idx_channel][rf_path];
- }
- }
- */
-
/* DBG_871X("TxPwrLmt[Regulation %d][Band %d][BW %d][RFPath %d][Rate 0x%x][Chnl %d] = %d\n", */
/* idx_regulation, hal_data->CurrentBandType, bandwidth, rf_path, data_rate, channel, pwr_lmt); */
return pwr_lmt;
--
2.20.1