[PATCH net-next v1 4/9] net: dsa: qca: ar9331: make proper initial port defaults
From: Oleksij Rempel
Date: Sat Apr 03 2021 - 07:49:42 EST
Make sure that all external port are actually isolated from each other,
so no packets are leaked.
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
drivers/net/dsa/qca/ar9331.c | 145 ++++++++++++++++++++++++++++++++++-
1 file changed, 143 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index 9a5035b2f0ff..a3de3598fbf5 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -60,10 +60,19 @@
#define AR9331_SW_REG_FLOOD_MASK 0x2c
#define AR9331_SW_FLOOD_MASK_BROAD_TO_CPU BIT(26)
+#define AR9331_SW_FLOOD_MASK_MULTI_FLOOD_DP GENMASK(20, 16)
+#define AR9331_SW_FLOOD_MASK_UNI_FLOOD_DP GENMASK(4, 0)
#define AR9331_SW_REG_GLOBAL_CTRL 0x30
#define AR9331_SW_GLOBAL_CTRL_MFS_M GENMASK(13, 0)
+#define AR9331_SW_REG_ADDR_TABLE_CTRL 0x5c
+#define AR9331_SW_AT_ARP_EN BIT(20)
+#define AR9331_SW_AT_LEARN_CHANGE_EN BIT(18)
+#define AR9331_SW_AT_AGE_EN BIT(17)
+#define AR9331_SW_AT_AGE_TIME GENMASK(15, 0)
+#define AR9331_SW_AT_AGE_TIME_COEF 6900 /* Not documented */
+
#define AR9331_SW_REG_MDIO_CTRL 0x98
#define AR9331_SW_MDIO_CTRL_BUSY BIT(31)
#define AR9331_SW_MDIO_CTRL_MASTER_EN BIT(30)
@@ -101,6 +110,46 @@
AR9331_SW_PORT_STATUS_RX_FLOW_EN | AR9331_SW_PORT_STATUS_TX_FLOW_EN | \
AR9331_SW_PORT_STATUS_SPEED_M)
+#define AR9331_SW_REG_PORT_CTRL(_port) (0x104 + (_port) * 0x100)
+#define AR9331_SW_PORT_CTRL_ING_MIRROR_EN BIT(17)
+#define AR9331_SW_PORT_CTRL_EG_MIRROR_EN BIT(16)
+#define AR9331_SW_PORT_CTRL_DOUBLE_TAG_VLAN BIT(15)
+#define AR9331_SW_PORT_CTRL_LEARN_EN BIT(14)
+#define AR9331_SW_PORT_CTRL_SINGLE_VLAN_EN BIT(13)
+#define AR9331_SW_PORT_CTRL_MAC_LOOP_BACK BIT(12)
+#define AR9331_SW_PORT_CTRL_HEAD_EN BIT(11)
+#define AR9331_SW_PORT_CTRL_IGMP_MLD_EN BIT(10)
+#define AR9331_SW_PORT_CTRL_EG_VLAN_MODE GENMASK(9, 8)
+#define AR9331_SW_PORT_CTRL_EG_VLAN_MODE_KEEP 0
+#define AR9331_SW_PORT_CTRL_EG_VLAN_MODE_STRIP 1
+#define AR9331_SW_PORT_CTRL_EG_VLAN_MODE_ADD 2
+#define AR9331_SW_PORT_CTRL_EG_VLAN_MODE_DOUBLE 3
+#define AR9331_SW_PORT_CTRL_LEARN_ONE_LOCK BIT(7)
+#define AR9331_SW_PORT_CTRL_PORT_LOCK_EN BIT(6)
+#define AR9331_SW_PORT_CTRL_LOCK_DROP_EN BIT(5)
+#define AR9331_SW_PORT_CTRL_PORT_STATE GENMASK(2, 0)
+#define AR9331_SW_PORT_CTRL_PORT_STATE_DISABLED 0
+#define AR9331_SW_PORT_CTRL_PORT_STATE_BLOCKING 1
+#define AR9331_SW_PORT_CTRL_PORT_STATE_LISTENING 2
+#define AR9331_SW_PORT_CTRL_PORT_STATE_LEARNING 3
+#define AR9331_SW_PORT_CTRL_PORT_STATE_FORWARD 4
+
+#define AR9331_SW_REG_PORT_VLAN(_port) (0x108 + (_port) * 0x100)
+#define AR9331_SW_PORT_VLAN_8021Q_MODE GENMASK(31, 30)
+#define AR9331_SW_8021Q_MODE_SECURE 3
+#define AR9331_SW_8021Q_MODE_CHECK 2
+#define AR9331_SW_8021Q_MODE_FALLBACK 1
+#define AR9331_SW_8021Q_MODE_NONE 0
+#define AR9331_SW_PORT_VLAN_ING_PORT_PRI GENMASK(29, 27)
+#define AR9331_SW_PORT_VLAN_FORCE_PORT_VLAN_EN BIT(26)
+#define AR9331_SW_PORT_VLAN_PORT_VID_MEMBER GENMASK(25, 16)
+#define AR9331_SW_PORT_VLAN_ARP_LEAKY_EN BIT(15)
+#define AR9331_SW_PORT_VLAN_UNI_LEAKY_EN BIT(14)
+#define AR9331_SW_PORT_VLAN_MULTI_LEAKY_EN BIT(13)
+#define AR9331_SW_PORT_VLAN_FORCE_DEFALUT_VID_EN BIT(12)
+#define AR9331_SW_PORT_VLAN_PORT_VID GENMASK(11, 0)
+#define AR9331_SW_PORT_VLAN_PORT_VID_DEF 1
+
/* MIB registers */
#define AR9331_MIB_COUNTER(x) (0x20000 + ((x) * 0x100))
@@ -229,6 +278,7 @@ struct ar9331_sw_priv {
struct regmap *regmap;
struct reset_control *sw_reset;
struct ar9331_sw_port port[AR9331_SW_PORTS];
+ int cpu_port;
};
static struct ar9331_sw_priv *ar9331_sw_port_to_priv(struct ar9331_sw_port *port)
@@ -371,12 +421,72 @@ static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv)
return 0;
}
-static int ar9331_sw_setup(struct dsa_switch *ds)
+static int ar9331_sw_setup_port(struct dsa_switch *ds, int port)
{
struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
struct regmap *regmap = priv->regmap;
+ u32 port_mask, port_ctrl, val;
int ret;
+ /* Generate default port settings */
+ port_ctrl = FIELD_PREP(AR9331_SW_PORT_CTRL_PORT_STATE,
+ AR9331_SW_PORT_CTRL_PORT_STATE_DISABLED);
+
+ if (dsa_is_cpu_port(ds, port)) {
+ /*
+ * CPU port should be allowed to communicate with all user
+ * ports.
+ */
+ //port_mask = dsa_user_ports(ds);
+ port_mask = 0;
+ /*
+ * Enable atheros header on CPU port. This will allow us
+ * communicate with each port separately
+ */
+ port_ctrl |= AR9331_SW_PORT_CTRL_HEAD_EN;
+ port_ctrl |= AR9331_SW_PORT_CTRL_LEARN_EN;
+ } else if (dsa_is_user_port(ds, port)) {
+ /*
+ * User ports should communicate only with the CPU port.
+ */
+ port_mask = BIT(priv->cpu_port);
+ /* Enable unicast address learning by default */
+ port_ctrl |= AR9331_SW_PORT_CTRL_LEARN_EN
+ /* IGMP snooping seems to work correctly, let's use it */
+ | AR9331_SW_PORT_CTRL_IGMP_MLD_EN
+ | AR9331_SW_PORT_CTRL_SINGLE_VLAN_EN;
+ } else {
+ /* Other ports do not need to communicate at all */
+ port_mask = 0;
+ }
+
+ val = FIELD_PREP(AR9331_SW_PORT_VLAN_8021Q_MODE,
+ AR9331_SW_8021Q_MODE_NONE) |
+ FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, port_mask) |
+ FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID,
+ AR9331_SW_PORT_VLAN_PORT_VID_DEF);
+
+ ret = regmap_write(regmap, AR9331_SW_REG_PORT_VLAN(port), val);
+ if (ret)
+ goto error;
+
+ ret = regmap_write(regmap, AR9331_SW_REG_PORT_CTRL(port), port_ctrl);
+ if (ret)
+ goto error;
+
+ return 0;
+error:
+ dev_err_ratelimited(priv->dev, "%s: error: %i\n", __func__, ret);
+
+ return ret;
+}
+
+static int ar9331_sw_setup(struct dsa_switch *ds)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct regmap *regmap = priv->regmap;
+ int ret, i;
+
ret = ar9331_sw_reset(priv);
if (ret)
return ret;
@@ -390,7 +500,8 @@ static int ar9331_sw_setup(struct dsa_switch *ds)
/* Do not drop broadcast frames */
ret = regmap_write_bits(regmap, AR9331_SW_REG_FLOOD_MASK,
- AR9331_SW_FLOOD_MASK_BROAD_TO_CPU,
+ AR9331_SW_FLOOD_MASK_BROAD_TO_CPU
+ | AR9331_SW_FLOOD_MASK_MULTI_FLOOD_DP,
AR9331_SW_FLOOD_MASK_BROAD_TO_CPU);
if (ret)
goto error;
@@ -402,6 +513,36 @@ static int ar9331_sw_setup(struct dsa_switch *ds)
if (ret)
goto error;
+ /*
+ * Configure the ARL:
+ * AR9331_SW_AT_ARP_EN - why?
+ * AR9331_SW_AT_LEARN_CHANGE_EN - why?
+ */
+ ret = regmap_set_bits(regmap, AR9331_SW_REG_ADDR_TABLE_CTRL,
+ AR9331_SW_AT_ARP_EN |
+ AR9331_SW_AT_LEARN_CHANGE_EN);
+ if (ret)
+ goto error;
+
+ /* find the CPU port */
+ priv->cpu_port = -1;
+ for (i = 0; i < ds->num_ports; i++) {
+ if (!dsa_is_cpu_port(ds, i))
+ continue;
+
+ if (priv->cpu_port != -1)
+ dev_err_ratelimited(priv->dev, "%s: more then one CPU port. Already set: %i, trying to add: %i\n",
+ __func__, priv->cpu_port, i);
+ else
+ priv->cpu_port = i;
+ }
+
+ for (i = 0; i < ds->num_ports; i++) {
+ ret = ar9331_sw_setup_port(ds, i);
+ if (ret)
+ goto error;
+ }
+
ds->configure_vlan_while_not_filtering = false;
return 0;
--
2.29.2