[PATCH v2 4/5] media: hantro: Use reset driver

From: Benjamin Gaignard
Date: Fri Feb 26 2021 - 04:14:48 EST


Rather use a reset like feature inside the driver use the reset
controller API to get the same result.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
---
drivers/staging/media/hantro/Kconfig | 1 +
drivers/staging/media/hantro/imx8m_vpu_hw.c | 61 ++++-----------------
2 files changed, 12 insertions(+), 50 deletions(-)

diff --git a/drivers/staging/media/hantro/Kconfig b/drivers/staging/media/hantro/Kconfig
index 5b6cf9f62b1a..dd1d4dde2658 100644
--- a/drivers/staging/media/hantro/Kconfig
+++ b/drivers/staging/media/hantro/Kconfig
@@ -20,6 +20,7 @@ config VIDEO_HANTRO_IMX8M
bool "Hantro VPU i.MX8M support"
depends on VIDEO_HANTRO
depends on ARCH_MXC || COMPILE_TEST
+ select RESET_VPU_IMX8MQ
default y
help
Enable support for i.MX8M SoCs.
diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
index c222de075ef4..d5b4312b9391 100644
--- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
+++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
@@ -7,49 +7,12 @@

#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/reset.h>

#include "hantro.h"
#include "hantro_jpeg.h"
#include "hantro_g1_regs.h"

-#define CTRL_SOFT_RESET 0x00
-#define RESET_G1 BIT(1)
-#define RESET_G2 BIT(0)
-
-#define CTRL_CLOCK_ENABLE 0x04
-#define CLOCK_G1 BIT(1)
-#define CLOCK_G2 BIT(0)
-
-#define CTRL_G1_DEC_FUSE 0x08
-#define CTRL_G1_PP_FUSE 0x0c
-#define CTRL_G2_DEC_FUSE 0x10
-
-static void imx8m_soft_reset(struct hantro_dev *vpu, u32 reset_bits)
-{
- u32 val;
-
- /* Assert */
- val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
- val &= ~reset_bits;
- writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
-
- udelay(2);
-
- /* Release */
- val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
- val |= reset_bits;
- writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
-}
-
-static void imx8m_clk_enable(struct hantro_dev *vpu, u32 clock_bits)
-{
- u32 val;
-
- val = readl(vpu->ctrl_base + CTRL_CLOCK_ENABLE);
- val |= clock_bits;
- writel(val, vpu->ctrl_base + CTRL_CLOCK_ENABLE);
-}
-
static int imx8mq_runtime_resume(struct hantro_dev *vpu)
{
int ret;
@@ -60,13 +23,10 @@ static int imx8mq_runtime_resume(struct hantro_dev *vpu)
return ret;
}

- imx8m_soft_reset(vpu, RESET_G1 | RESET_G2);
- imx8m_clk_enable(vpu, CLOCK_G1 | CLOCK_G2);
+ ret = device_reset(vpu->dev);
+ if (ret)
+ dev_err(vpu->dev, "Failed to reset Hantro VPU\n");

- /* Set values of the fuse registers */
- writel(0xffffffff, vpu->ctrl_base + CTRL_G1_DEC_FUSE);
- writel(0xffffffff, vpu->ctrl_base + CTRL_G1_PP_FUSE);
- writel(0xffffffff, vpu->ctrl_base + CTRL_G2_DEC_FUSE);

clk_bulk_disable_unprepare(vpu->variant->num_clocks, vpu->clocks);

@@ -151,16 +111,17 @@ static irqreturn_t imx8m_vpu_g1_irq(int irq, void *dev_id)
static int imx8mq_vpu_hw_init(struct hantro_dev *vpu)
{
vpu->dec_base = vpu->reg_bases[0];
- vpu->ctrl_base = vpu->reg_bases[vpu->variant->num_regs - 1];

return 0;
}

-static void imx8m_vpu_g1_reset(struct hantro_ctx *ctx)
+static void imx8mq_vpu_reset(struct hantro_ctx *ctx)
{
struct hantro_dev *vpu = ctx->dev;
+ int ret = device_reset(vpu->dev);

- imx8m_soft_reset(vpu, RESET_G1);
+ if (ret)
+ dev_err(vpu->dev, "Failed to reset Hantro VPU\n");
}

/*
@@ -170,19 +131,19 @@ static void imx8m_vpu_g1_reset(struct hantro_ctx *ctx)
static const struct hantro_codec_ops imx8mq_vpu_codec_ops[] = {
[HANTRO_MODE_MPEG2_DEC] = {
.run = hantro_g1_mpeg2_dec_run,
- .reset = imx8m_vpu_g1_reset,
+ .reset = imx8mq_vpu_reset,
.init = hantro_mpeg2_dec_init,
.exit = hantro_mpeg2_dec_exit,
},
[HANTRO_MODE_VP8_DEC] = {
.run = hantro_g1_vp8_dec_run,
- .reset = imx8m_vpu_g1_reset,
+ .reset = imx8mq_vpu_reset,
.init = hantro_vp8_dec_init,
.exit = hantro_vp8_dec_exit,
},
[HANTRO_MODE_H264_DEC] = {
.run = hantro_g1_h264_dec_run,
- .reset = imx8m_vpu_g1_reset,
+ .reset = imx8mq_vpu_reset,
.init = hantro_h264_dec_init,
.exit = hantro_h264_dec_exit,
},
--
2.25.1