Re: [PATCH v5 1/3] usb: serial: Add MaxLinear/Exar USB to Serial driver
From: Mauro Carvalho Chehab
Date: Thu Feb 25 2021 - 13:04:27 EST
Em Mon, 22 Feb 2021 16:47:36 +0100
Johan Hovold <johan@xxxxxxxxxx> escreveu:
> On Mon, Feb 22, 2021 at 04:27:34PM +0100, Mauro Carvalho Chehab wrote:
> > Hi Johan,
> >
> > Em Tue, 26 Jan 2021 17:26:36 +0100
> > Johan Hovold <johan@xxxxxxxxxx> escreveu:
> >
> > > On Tue, Jan 26, 2021 at 09:16:04PM +0530, Manivannan Sadhasivam wrote:
> > > > On Thu, Jan 21, 2021 at 11:19:24AM +0100, Johan Hovold wrote:
> > > > > On Sun, Nov 22, 2020 at 10:38:20PM +0530, Manivannan Sadhasivam wrote:
> > > > > > Add support for MaxLinear/Exar USB to Serial converters. This driver
> > > > > > only supports XR21V141X series but it can be extended to other series
> > > > > > from Exar as well in future.
>
> > I'm now facing an issue with this driver. I have here two different
> > boards with those USB UART from MaxLinear/Exar.
> >
> > The first one is identical to Mani's one:
> > USB_DEVICE(0x04e2, 0x1411)
> > The second one is a different version of it:
> > USB_DEVICE(0x04e2, 0x1424)
> >
> > By looking at the final driver merged at linux-next, it sounds that
> > somewhere during the review of this series, it lost the priv struct,
> > and the xr_probe function. It also lost support for all MaxLinear/Exar
> > devices, except for just one model (04e2:1411).
> >
> > The original submission:
> >
> > https://lore.kernel.org/linux-usb/20180404070634.nhspvmxcjwfgjkcv@advantechmxl-desktop
> >
> > And the manufacturer's Linux driver on their website:
> >
> > https://www.maxlinear.com/support/design-tools/software-drivers
> >
> > Had support for other 12 different models of the MaxLinear/Exar USB
> > UART.
>
> IIRC Manivannan only had access to one of these models and his original
> submission (based on the patch you link to above) didn't include support
> for the others. And keeping the type abstraction didn't make sense for
> just one model.
>
> > Those are grouped into 5 different major types:
> >
> > + init_xr2280x_reg_map();
> > + init_xr21b142x_reg_map();
> > + init_xr21b1411_reg_map();
> > + init_xr21v141x_reg_map();
> > +
> > + if ((xrusb->DeviceProduct & 0xfff0) == 0x1400)
> > + memcpy(&(xrusb->reg_map), &xr2280x_reg_map,
> > + sizeof(struct reg_addr_map));
> > + else if ((xrusb->DeviceProduct & 0xFFF0) == 0x1420)
> > + memcpy(&(xrusb->reg_map), &xr21b142x_reg_map,
> > + sizeof(struct reg_addr_map));
> > + else if (xrusb->DeviceProduct == 0x1411)
> > + memcpy(&(xrusb->reg_map), &xr21b1411_reg_map,
> > + sizeof(struct reg_addr_map));
> > + else if ((xrusb->DeviceProduct & 0xfff0) == 0x1410)
> > + memcpy(&(xrusb->reg_map), &xr21v141x_reg_map,
> > + sizeof(struct reg_addr_map));
> > + else
> > + rv = -1;
> >
> > Note: Please don't be confused by "reg_map" name. This has nothing
> > to do with Linux regmap API ;-)
> >
> > What happens is that different USB IDs have different values for
> > each register. So, for instance, the UART enable register is set to
> > either one of the following values, depending on the value of
> > udev->descriptor.idProduct:
> >
> > xr21b140x_reg_map.uart_enable_addr = 0x00;
> > xr21b1411_reg_map.uart_enable_addr = 0xc00;
> > xr21v141x_reg_map.uart_enable_addr = 0x03;
> > xr21b142x_reg_map.uart_enable_addr = 0x00;
> >
> > There are other values that depend on the probing time detection,
> > based on other USB descriptors. Those set several fields at the
> > priv data that would allow to properly map the registers.
> >
> > Also, there are 4 models that support multiple channels. On those,
> > there are one pair of register get/set for each channel.
> >
> > -
> >
> > In summary, while supporting just 04e2:1411 there's no need for
> > a private struct, in order to properly support the other models,
> > some autodetection is needed. The best way of doing that is to
> > re-add the .probe method and adding a priv struct.
> >
> > As I dunno why this was dropped in the first place, I'm wondering
> > if it would be ok to re-introduce them.
>
> Sure. It was just not needed if we were only going to support one model.
>
> > To be clear: my main focus here is just to avoid needing to use
> > Windows in order to use the serial console of the hardware with
> > the 0x1424 variant ;-)
> >
> > I can't test the driver with the other hardware, but, IMHO, instead
> > of adding a hack to support 0x1424, the better (but more painful)
> > would be to re-add the auto-detection part and support for the
> > other models.
>
> Sounds good to me.
While testing the xr_serial (as currently merged), I opted to apply
the patches on the top of vanilla Kernel 5.11 - as it sounds too risky
to use linux-next so early on a new development cycle :-)
There, I'm getting an OOPS:
[ 30.261291] BUG: kernel NULL pointer dereference, address: 00000000000000a8
[ 30.261375] #PF: supervisor write access in kernel mode
[ 30.261438] #PF: error_code(0x0002) - not-present page
[ 30.261500] PGD 0 P4D 0
[ 30.261539] Oops: 0002 [#1] SMP PTI
[ 30.261586] CPU: 2 PID: 686 Comm: kworker/2:3 Not tainted 5.11.0+ #14
[ 30.261666] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0380.2019.0517.1530 05/17/2019
[ 30.261757] Workqueue: usb_hub_wq hub_event
[ 30.261816] RIP: 0010:mutex_lock+0x1e/0x40
[ 30.261875] Code: c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 54 49 89 fc e8 8d dd ff ff 31 c0 65 48 8b 14 25 c0 7b 01 00 <f0> 49 0f b1 14 24 75 04 41 5c 5d c3 4c 89 e7 e8 ae ff ff ff 41 5c
[ 30.262076] RSP: 0018:ffffb937c0767b70 EFLAGS: 00010246
[ 30.262140] RAX: 0000000000000000 RBX: ffff95e71ef75430 RCX: 0000000000000027
[ 30.262223] RDX: ffff95e70597b000 RSI: 00000000ffffdfff RDI: 00000000000000a8
[ 30.262305] RBP: ffffb937c0767b78 R08: ffff95ea76d18ac0 R09: ffffb937c0767948
[ 30.262387] R10: 0000000000000001 R11: 0000000000000001 R12: 00000000000000a8
[ 30.262469] R13: 0000000000000000 R14: ffff95e71ef75400 R15: 0000000000000000
[ 30.262551] FS: 0000000000000000(0000) GS:ffff95ea76d00000(0000) knlGS:0000000000000000
[ 30.262645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 30.262713] CR2: 00000000000000a8 CR3: 000000042be0a002 CR4: 00000000003706e0
[ 30.262796] Call Trace:
[ 30.262832] usb_serial_disconnect+0x33/0x140
[ 30.262897] usb_unbind_interface+0x8c/0x260
[ 30.262957] device_release_driver_internal+0x103/0x1d0
[ 30.263026] device_release_driver+0x12/0x20
[ 30.263083] bus_remove_device+0xe1/0x150
[ 30.263140] device_del+0x192/0x3f0
[ 30.263188] ? usb_remove_ep_devs+0x1f/0x30
[ 30.263244] usb_disable_device+0x95/0x1c0
[ 30.263300] usb_disconnect+0xc0/0x270
[ 30.263350] hub_event+0xa2e/0x1620
After adding this hack:
<snip>
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1081,6 +1081,11 @@ static void usb_serial_disconnect(struct usb_interface *interface)
struct usb_serial_port *port;
struct tty_struct *tty;
+ if (!serial) {
+ dev_err(dev, "%s: Serial pointer is NULL!!!\n", __func__);
+ return;
+ }
+
usb_serial_console_disconnect(serial);
mutex_lock(&serial->disc_mutex);
</snip>
It works fine:
[ 283.005625] xr_serial 2-1:1.1: xr_serial converter detected
[ 283.005868] usb 2-1: xr_serial converter now attached to ttyUSB0
[ 283.007284] printk: console [ttyUSB0] enabled
[ 284.444419] usb 2-1: USB disconnect, device number 5
[ 284.444520] xr_serial 2-1:1.0: usb_serial_disconnect: Serial pointer is NULL!!!
[ 284.444894] printk: console [ttyUSB0] disabled
[ 284.445091] xr_serial ttyUSB0: xr_serial converter now disconnected from ttyUSB0
[ 284.445141] xr_disconnect
[ 284.445156] xr_serial 2-1:1.1: device disconnected
I'm not sure if the bug is at xr_serial or if it is inside usb-serial.c.
Any ideas?
Thanks,
Mauro