[PATCH v4 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies

From: Hsin-Yi Wang
Date: Wed Feb 24 2021 - 01:17:58 EST


anx7625 requires 3 power supply regulators.

Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Reviewed-by: Robert Foss <robert.foss@xxxxxxxxxx>
---
v3->v4: rebase to drm-misc/for-linux-next
---
.../bindings/display/bridge/analogix,anx7625.yaml | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index c789784efe306..ab48ab2f4240d 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -34,6 +34,15 @@ properties:
description: used for reset chip control, RESET_N pin B7.
maxItems: 1

+ vdd10-supply:
+ description: Regulator that provides the supply 1.0V power.
+
+ vdd18-supply:
+ description: Regulator that provides the supply 1.8V power.
+
+ vdd33-supply:
+ description: Regulator that provides the supply 3.3V power.
+
ports:
$ref: /schemas/graph.yaml#/properties/ports

@@ -55,6 +64,9 @@ properties:
required:
- compatible
- reg
+ - vdd10-supply
+ - vdd18-supply
+ - vdd33-supply
- ports

additionalProperties: false
@@ -72,6 +84,9 @@ examples:
reg = <0x58>;
enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+ vdd10-supply = <&pp1000_mipibrdg>;
+ vdd18-supply = <&pp1800_mipibrdg>;
+ vdd33-supply = <&pp3300_mipibrdg>;

ports {
#address-cells = <1>;
--
2.30.1.766.gb4fecdf3b7-goog