Re: [PATCH v5 1/4] dt-bindings: usb: Add binding for discrete onboard USB hubs

From: Rob Herring
Date: Fri Feb 19 2021 - 10:06:46 EST


On Wed, Feb 17, 2021 at 7:33 PM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
>
> Hi Rob,
>
> thanks for your review!
>
> On Wed, Feb 17, 2021 at 03:04:41PM -0600, Rob Herring wrote:
> > On Wed, Feb 10, 2021 at 09:10:36AM -0800, Matthias Kaehlcke wrote:
> > > Discrete onboard USB hubs (an example for such a hub is the Realtek
> > > RTS5411) need to be powered and may require initialization of other
> > > resources (like GPIOs or clocks) to work properly. This adds a device
> > > tree binding for these hubs.
> > >
> > > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> > > ---
> > >
> > > Changes in v5:
> > > - updated 'title'
> > > - only use standard USB compatible strings
> > > - deleted 'usb_hub' node
> > > - renamed 'usb_controller' node to 'usb-controller'
> > > - removed labels from USB nodes
> > > - added 'vdd-supply' to USB nodes
> > >
> > > Changes in v4:
> > > - none
> > >
> > > Changes in v3:
> > > - updated commit message
> > > - removed recursive reference to $self
> > > - adjusted 'compatible' definition to support multiple entries
> > > - changed USB controller phandle to be a node
> > >
> > > Changes in v2:
> > > - removed 'wakeup-source' and 'power-off-in-suspend' properties
> > > - consistently use spaces for indentation in example
> > >
> > > .../bindings/usb/onboard_usb_hub.yaml | 49 +++++++++++++++++++
> > > 1 file changed, 49 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml b/Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml
> > > new file mode 100644
> > > index 000000000000..bf4ec52e6c7b
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml
> > > @@ -0,0 +1,49 @@
> > > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/usb/onboard_usb_hub.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Binding for discrete onboard USB hubs
> >
> > This isn't really generic. Maybe there's a set of hubs with only a
> > single supply much like 'simple-panel', but I kind of doubt that here.
> > There aren't hundreds of hub chips like panels. Though, we should put
> > this into bindings/usb/hub/ so we start collecting hub bindings in one
> > place.
>
> Ok, I agree that the name of the binding is too generic, I anticipated that
> the power supply section would need to be extended to support other hub
> chips.
>
> > A generic driver doesn't have to have a generic binding.
>
> That's a good point, it seems to make sense to have separate bindings in
> this case.
>
> > You can have a specific device binding which is handled by a generic
> > driver. Or not. Who knows. Maybe a simple user like u-boot has a generic
> > driver while something more feature rich has a device specific binding.
> >
> > > +
> > > +maintainers:
> > > + - Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> >
> > Now we have usb-device.yaml, you need:
> >
> > allOf:
> > - $ref: usb-device.yaml#
>
> ok
>
> So with your comments addressed it seems we have a binding that could be
> acceptable. I'll still hold back a bit to see if we can make progress with
> the discussion about using the 'graph' binding (https://lore.kernel.org/patchwork/patch/1379002/#1578294).
> The one thing I don't like about the current binding is that it wouldn't
> work out of the box with a hierarchy of hubs. To make that work on the
> driver side an additional property would be needed to indicate that two
> (or more) USB hub devices are related (i.e. are provided by the same
> chip). This is needed to be able to decide whether the hub should be
> powered down during system suspend.

How about a 'hub-companion' property or similar?

Rob