Re: [PATCH v5] arm64: Enable perf events based hard lockup detector

From: Sumit Garg
Date: Fri Feb 19 2021 - 04:38:59 EST


Hi Will, Mark,

On Fri, 15 Jan 2021 at 17:32, Sumit Garg <sumit.garg@xxxxxxxxxx> wrote:
>
> With the recent feature added to enable perf events to use pseudo NMIs
> as interrupts on platforms which support GICv3 or later, its now been
> possible to enable hard lockup detector (or NMI watchdog) on arm64
> platforms. So enable corresponding support.
>
> One thing to note here is that normally lockup detector is initialized
> just after the early initcalls but PMU on arm64 comes up much later as
> device_initcall(). So we need to re-initialize lockup detection once
> PMU has been initialized.
>
> Signed-off-by: Sumit Garg <sumit.garg@xxxxxxxxxx>
> ---
>
> Changes in v5:
> - Fix lockup_detector_init() invocation to be rather invoked from CPU
> binded context as it makes heavy use of per-cpu variables and shouldn't
> be invoked from preemptible context.
>

Do you have any further comments on this?

Lecopzer,

Does this feature work fine for you now?

-Sumit

> Changes in v4:
> - Rebased to latest pmu v7 NMI patch-set [1] and in turn use "has_nmi"
> hook to know if PMU IRQ has been requested as an NMI.
> - Add check for return value prior to initializing hard-lockup detector.
>
> [1] https://lkml.org/lkml/2020/9/24/458
>
> Changes in v3:
> - Rebased to latest pmu NMI patch-set [1].
> - Addressed misc. comments from Stephen.
>
> [1] https://lkml.org/lkml/2020/8/19/671
>
> Changes since RFC:
> - Rebased on top of Alex's WIP-pmu-nmi branch.
> - Add comment for safe max. CPU frequency.
> - Misc. cleanup.
>
> arch/arm64/Kconfig | 2 ++
> arch/arm64/kernel/perf_event.c | 48 ++++++++++++++++++++++++++++++++++++++++--
> drivers/perf/arm_pmu.c | 5 +++++
> include/linux/perf/arm_pmu.h | 2 ++
> 4 files changed, 55 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index f39568b..05e1735 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -174,6 +174,8 @@ config ARM64
> select HAVE_NMI
> select HAVE_PATA_PLATFORM
> select HAVE_PERF_EVENTS
> + select HAVE_PERF_EVENTS_NMI if ARM64_PSEUDO_NMI && HW_PERF_EVENTS
> + select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
> select HAVE_PERF_REGS
> select HAVE_PERF_USER_STACK_DUMP
> select HAVE_REGS_AND_STACK_ACCESS_API
> diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
> index 3605f77a..bafb7c8 100644
> --- a/arch/arm64/kernel/perf_event.c
> +++ b/arch/arm64/kernel/perf_event.c
> @@ -23,6 +23,8 @@
> #include <linux/platform_device.h>
> #include <linux/sched_clock.h>
> #include <linux/smp.h>
> +#include <linux/nmi.h>
> +#include <linux/cpufreq.h>
>
> /* ARMv8 Cortex-A53 specific event types. */
> #define ARMV8_A53_PERFCTR_PREF_LINEFILL 0xC2
> @@ -1246,12 +1248,30 @@ static struct platform_driver armv8_pmu_driver = {
> .probe = armv8_pmu_device_probe,
> };
>
> +static int __init lockup_detector_init_fn(void *data)
> +{
> + lockup_detector_init();
> + return 0;
> +}
> +
> static int __init armv8_pmu_driver_init(void)
> {
> + int ret;
> +
> if (acpi_disabled)
> - return platform_driver_register(&armv8_pmu_driver);
> + ret = platform_driver_register(&armv8_pmu_driver);
> else
> - return arm_pmu_acpi_probe(armv8_pmuv3_init);
> + ret = arm_pmu_acpi_probe(armv8_pmuv3_init);
> +
> + /*
> + * Try to re-initialize lockup detector after PMU init in
> + * case PMU events are triggered via NMIs.
> + */
> + if (ret == 0 && arm_pmu_irq_is_nmi())
> + smp_call_on_cpu(raw_smp_processor_id(), lockup_detector_init_fn,
> + NULL, false);
> +
> + return ret;
> }
> device_initcall(armv8_pmu_driver_init)
>
> @@ -1309,3 +1329,27 @@ void arch_perf_update_userpage(struct perf_event *event,
> userpg->cap_user_time_zero = 1;
> userpg->cap_user_time_short = 1;
> }
> +
> +#ifdef CONFIG_HARDLOCKUP_DETECTOR_PERF
> +/*
> + * Safe maximum CPU frequency in case a particular platform doesn't implement
> + * cpufreq driver. Although, architecture doesn't put any restrictions on
> + * maximum frequency but 5 GHz seems to be safe maximum given the available
> + * Arm CPUs in the market which are clocked much less than 5 GHz. On the other
> + * hand, we can't make it much higher as it would lead to a large hard-lockup
> + * detection timeout on parts which are running slower (eg. 1GHz on
> + * Developerbox) and doesn't possess a cpufreq driver.
> + */
> +#define SAFE_MAX_CPU_FREQ 5000000000UL // 5 GHz
> +u64 hw_nmi_get_sample_period(int watchdog_thresh)
> +{
> + unsigned int cpu = smp_processor_id();
> + unsigned long max_cpu_freq;
> +
> + max_cpu_freq = cpufreq_get_hw_max_freq(cpu) * 1000UL;
> + if (!max_cpu_freq)
> + max_cpu_freq = SAFE_MAX_CPU_FREQ;
> +
> + return (u64)max_cpu_freq * watchdog_thresh;
> +}
> +#endif
> diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
> index cb2f55f..794a37d 100644
> --- a/drivers/perf/arm_pmu.c
> +++ b/drivers/perf/arm_pmu.c
> @@ -726,6 +726,11 @@ static int armpmu_get_cpu_irq(struct arm_pmu *pmu, int cpu)
> return per_cpu(hw_events->irq, cpu);
> }
>
> +bool arm_pmu_irq_is_nmi(void)
> +{
> + return has_nmi;
> +}
> +
> /*
> * PMU hardware loses all context when a CPU goes offline.
> * When a CPU is hotplugged back in, since some hardware registers are
> diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
> index 5054802..bf79667 100644
> --- a/include/linux/perf/arm_pmu.h
> +++ b/include/linux/perf/arm_pmu.h
> @@ -163,6 +163,8 @@ int arm_pmu_acpi_probe(armpmu_init_fn init_fn);
> static inline int arm_pmu_acpi_probe(armpmu_init_fn init_fn) { return 0; }
> #endif
>
> +bool arm_pmu_irq_is_nmi(void);
> +
> /* Internal functions only for core arm_pmu code */
> struct arm_pmu *armpmu_alloc(void);
> struct arm_pmu *armpmu_alloc_atomic(void);
> --
> 2.7.4
>