Re: [PATCH v2 1/7] dt-bindings: usb: convert rockchip,dwc3.txt to yaml

From: Robin Murphy
Date: Thu Feb 04 2021 - 06:38:51 EST


On 2021-02-03 16:52, Johan Jonker wrote:
In the past Rockchip dwc3 usb nodes were manually checked.
With the conversion of snps,dwc3.yaml as common document
we now can convert rockchip,dwc3.txt to yaml as well.
Remove node wrapper.

Added properties for rk3399 are:
power-domains
resets
reset-names

Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
.../devicetree/bindings/usb/rockchip,dwc3.txt | 56 -----------
.../devicetree/bindings/usb/rockchip,dwc3.yaml | 103 +++++++++++++++++++++
2 files changed, 103 insertions(+), 56 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
create mode 100644 Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml

diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
deleted file mode 100644
index 945204932..000000000
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Rockchip SuperSpeed DWC3 USB SoC controller
-
-Required properties:
-- compatible: should contain "rockchip,rk3399-dwc3" for rk3399 SoC
-- clocks: A list of phandle + clock-specifier pairs for the
- clocks listed in clock-names
-- clock-names: Should contain the following:
- "ref_clk" Controller reference clk, have to be 24 MHz
- "suspend_clk" Controller suspend clk, have to be 24 MHz or 32 KHz
- "bus_clk" Master/Core clock, have to be >= 62.5 MHz for SS
- operation and >= 30MHz for HS operation
- "grf_clk" Controller grf clk
-
-Required child node:
-A child node must exist to represent the core DWC3 IP block. The name of
-the node is not important. The content of the node is defined in dwc3.txt.
-
-Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml - USB2.0 PHY
-Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt - Type-C PHY
-
-Example device nodes:
-
- usbdrd3_0: usb@fe800000 {
- compatible = "rockchip,rk3399-dwc3";
- clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
- <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
- clock-names = "ref_clk", "suspend_clk",
- "bus_clk", "grf_clk";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- usbdrd_dwc3_0: dwc3@fe800000 {
- compatible = "snps,dwc3";
- reg = <0x0 0xfe800000 0x0 0x100000>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "otg";
- };
- };
-
- usbdrd3_1: usb@fe900000 {
- compatible = "rockchip,rk3399-dwc3";
- clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
- <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
- clock-names = "ref_clk", "suspend_clk",
- "bus_clk", "grf_clk";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- usbdrd_dwc3_1: dwc3@fe900000 {
- compatible = "snps,dwc3";
- reg = <0x0 0xfe900000 0x0 0x100000>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "otg";
- };
- };
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
new file mode 100644
index 000000000..fdf9497bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/rockchip,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+ - Heiko Stuebner <heiko@xxxxxxxxx>
+
+description:
+ The common content of the node is defined in snps,dwc3.yaml.
+
+ Phy documentation is provided in the following places.
+
+ USB2.0 PHY
+ Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
+
+ Type-C PHY
+ Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
+
+allOf:
+ - $ref: snps,dwc3.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - rockchip,rk3399-dwc3
+ - const: snps,dwc3
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description:
+ Controller reference clock, must to be 24 MHz
+ - description:
+ Controller suspend clock, must to be 24 MHz or 32 KHz
+ - description:
+ Master/Core clock, must to be >= 62.5 MHz for SS
+ operation and >= 30MHz for HS operation
+ - description:
+ Controller aclk_usb3_rksoc_axi_perf clock

I'm pretty sure these last 3 don't belong to the controller itself, hence why they were in the glue layer node to being with.

+ - description:
+ Controller aclk_usb3 clock

Does anything in the USB3 block actually consume this clock directly? If not, then I don't think it needs to be specified since it's already the parent of the controller's required bus_clk.

I'm similarly suspicious of ACLK_USB3_NOC which is currently marked as CLK_IGNORE_UNUSED - if that's necessary for USB3 to function then it probably *should* be specified as part of the glue layer binding here.

Robin.

+ - description:
+ Controller grf clock
+
+ clock-names:
+ items:
+ - const: ref_clk
+ - const: suspend_clk
+ - const: bus_clk
+ - const: aclk_usb3_rksoc_axi_perf
+ - const: aclk_usb3
+ - const: grf_clk
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: usb3-otg
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3399-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usbdrd3_0: usb@fe800000 {
+ compatible = "rockchip,rk3399-dwc3", "snps,dwc3";
+ reg = <0x0 0xfe800000 0x0 0x100000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+ <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+ <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk", "aclk_usb3_rksoc_axi_perf",
+ "aclk_usb3", "grf_clk";
+ dr_mode = "otg";
+ };
+ };