[PATCH v1 5/7] ARM i.MX6q: remove Atheros AR8035 SmartEEE fixup

From: Oleksij Rempel
Date: Wed Feb 03 2021 - 04:22:15 EST


This fixup removes the Lpi_en bit.

If this patch breaks functionality of your board, use following device
tree properties:

ethernet-phy@X {
reg = <0xX>;
eee-broken-1000t;
eee-broken-100tx;
....
};

Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
arch/arm/mach-imx/mach-imx6q.c | 21 ---------------------
1 file changed, 21 deletions(-)

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index d12b571a61ac..c9d7c29d95e1 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -68,32 +68,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);

-static int ar8035_phy_fixup(struct phy_device *dev)
-{
- u16 val;
-
- /* Ar803x phy SmartEEE feature cause link status generates glitch,
- * which cause ethernet link down/up issue, so disable SmartEEE
- */
- phy_write(dev, 0xd, 0x3);
- phy_write(dev, 0xe, 0x805d);
- phy_write(dev, 0xd, 0x4003);
-
- val = phy_read(dev, 0xe);
- phy_write(dev, 0xe, val & ~(1 << 8));
-
- return 0;
-}
-
-#define PHY_ID_AR8035 0x004dd072
-
static void __init imx6q_enet_phy_init(void)
{
if (IS_BUILTIN(CONFIG_PHYLIB)) {
phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
ksz9021rn_phy_fixup);
- phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
- ar8035_phy_fixup);
}
}

--
2.30.0