Re: Re: [PATCH v4] ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode

From: Hermann Lauer
Date: Mon Feb 01 2021 - 07:09:58 EST


On Thu, Jan 28, 2021 at 03:59:37PM +0100, Maxime Ripard wrote:
> On Thu, Jan 28, 2021 at 12:18:42PM +0100, Hermann.Lauer@xxxxxxxxxxxxxxxxx wrote:
> > BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high
> > packet loss rates. The realtek phy driver overrides the settings of the
> > pull ups for the delays, so fix this for BananaPro.
> >
> > Fix the phy-mode description to correctly reflect this so that the
> > implementation doesn't reconfigure the delays incorrectly. This
> > happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
> > rx/tx delay config").
> >
> > Fixes: 10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board")
> > Signed-off-by: Hermann Lauer <Hermann.Lauer@xxxxxxxxxxxxxxxxx>
>
> Applied since it's a fix simple enough, but please provide a changelog
> between versions.

v3 added the correct fixes tag, where the problem originated (initial commit
of banana pro device tree). That worked in the past until a change in
the phy device driver for realtek phy on banana pro overrode the
phyical configuration of the hardware pull-ups.

v4 added the commit which implemented that driver change (shamelessly stolen
from the commit of the fix of the identical problem on the banana pi)

Thanks,
greetings
Hermann

--
Administration/Zentrale Dienste, Interdiziplinaeres
Zentrum fuer wissenschaftliches Rechnen der Universitaet Heidelberg
IWR; INF 205; 69120 Heidelberg; Tel: (06221)54-14405 Fax: -14427
Email: Hermann.Lauer@xxxxxxxxxxxxxxxxxxxxx