Re: [PATCH] pinctrl: Support pin that does not support configuration option

[Michael Nazzareno Trimarchi]

Hi Fabio

On Mon, Feb 1, 2021 at 12:47 PM Fabio Estevam <festevam@xxxxxxxxx> wrote:
>
> Hi Michael,
>
> On Sat, Jan 30, 2021 at 5:21 AM Michael Trimarchi
> <michael@xxxxxxxxxxxxxxxxxxxx> wrote:
> >
> > Some of the iMX25 pins have not an associated configuration register so
> > when they are configured the standard way through the device tree the
> > kernel complains with:
> >
> > imx25-pinctrl 43fac000.iomuxc: Pin(MX25_PAD_EXT_ARMCLK) does not support
> > config function
>
> Could you please share your device tree that causes this warning?
>
> Shouldn't you pass 0x80000000 in the devicetree for this pad then?
>
> 0x80000000 means that the kernel should not touch the PAD_CTL register
> and use the default configuration from the bootloader/POR.

arch/arm/boot/dts/imx25-lisa.dts:
MX25_PAD_EXT_ARMCLK__GPIO_3_15  0x80000000

The problem that exists pad that can be muxed but not configured

Michael


-- 
Michael Nazzareno Trimarchi
Amarula Solutions BV
COO Co-Founder
Cruquiuskade 47 Amsterdam 1018 AM NL
T. +31(0)851119172
M. +39(0)3479132170
[`as] https://www.amarulasolutions.com