Re: [RESEND PATCH v18 0/3] userspace MHI client interface driver

From: Greg KH
Date: Mon Feb 01 2021 - 06:16:38 EST


On Mon, Feb 01, 2021 at 04:25:49PM +0530, Manivannan Sadhasivam wrote:
> Hi Greg,
>
> On Wed, Jan 27, 2021 at 04:15:42PM +0100, Greg KH wrote:
> > On Wed, Jan 13, 2021 at 08:56:25PM +0530, Manivannan Sadhasivam wrote:
> > > Hi Greg,
> > >
> > > On Wed, Jan 06, 2021 at 10:44:13AM -0800, Hemant Kumar wrote:
> > > > This patch series adds support for UCI driver. UCI driver enables userspace
> > > > clients to communicate to external MHI devices like modem. UCI driver probe
> > > > creates standard character device file nodes for userspace clients to
> > > > perform open, read, write, poll and release file operations. These file
> > > > operations call MHI core layer APIs to perform data transfer using MHI bus
> > > > to communicate with MHI device.
> > > >
> > > > This interface allows exposing modem control channel(s) such as QMI, MBIM,
> > > > or AT commands to userspace which can be used to configure the modem using
> > > > tools such as libqmi, ModemManager, minicom (for AT), etc over MHI. This is
> > > > required as there are no kernel APIs to access modem control path for device
> > > > configuration. Data path transporting the network payload (IP), however, is
> > > > routed to the Linux network via the mhi-net driver. Currently driver supports
> > > > QMI channel. libqmi is userspace MHI client which communicates to a QMI
> > > > service using QMI channel. Please refer to
> > > > https://www.freedesktop.org/wiki/Software/libqmi/ for additional information
> > > > on libqmi.
> > > >
> > > > Patch is tested using arm64 and x86 based platform.
> > > >
> > >
> > > This series looks good to me and I'd like to merge it into mhi-next. You
> > > shared your reviews on the previous revisions, so I'd like to get your
> > > opinion first.
> >
> > If you get the networking people to give you an ack on this, it's fine
> > with me.
> >
>
> As discussed in previous iteration, this series is not belonging to networking
> subsystem. The functionality provided by this series allows us to configure the
> modem over MHI bus and the rest of the networking stuff happens over the
> networking subsystem as usual.

Great, then it should be easy to get their acceptance :)

> This holds the same with USB and serial modems which we are having over decades
> in mainline.

I don't see the connection here, sorry.

thanks,

greg k-h