Re: [PATCH] mmc: sdhci-pci-gli: Enlarge ASPM L1 entry delay of GL9763E (v2)

[Ulf Hansson]

On Fri, 15 Jan 2021 at 06:47, Renius Chen <reniuschengl@xxxxxxxxx> wrote:
>
> GL9763E enters ASPM L1 state after a very short idle in default,
> even during a burst of request. So the R/W performance of GL9763E
> is low with some platforms, which support ASPM mechanism, due to
> entering ASPM L1 state very frequently in R/W process. Set the L1
> entry delay bits in vendor-specific register to 0x3FF to enlarge
> the idle period to 260us for improving the R/W performance
> of GL9763E.
>
> Signed-off-by: Renius Chen <reniuschengl@xxxxxxxxx>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  drivers/mmc/host/sdhci-pci-gli.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index c6a107d7c742..fb14f70cb9a0 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -88,6 +88,10 @@
>  #define PCIE_GLI_9763E_SCR      0x8E0
>  #define   GLI_9763E_SCR_AXI_REQ           BIT(9)
>
> +#define PCIE_GLI_9763E_CFG2      0x8A4
> +#define   GLI_9763E_CFG2_L1DLY     GENMASK(28, 19)
> +#define   GLI_9763E_CFG2_L1DLY_MAX 0x3FF
> +
>  #define PCIE_GLI_9763E_MMC_CTRL  0x960
>  #define   GLI_9763E_HS400_SLOW     BIT(3)
>
> @@ -792,6 +796,12 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
>         value &= ~GLI_9763E_HS400_SLOW;
>         pci_write_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, value);
>
> +       pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG2, &value);
> +       value &= ~GLI_9763E_CFG2_L1DLY;
> +       /* set ASPM L1 entry delay to 260us */
> +       value |= FIELD_PREP(GLI_9763E_CFG2_L1DLY, GLI_9763E_CFG2_L1DLY_MAX);
> +       pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG2, value);
> +
>         pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
>         value &= ~GLI_9763E_VHS_REV;
>         value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
> --
> 2.27.0
>