Re: [PATCH 1/1] usb: xhci: setup packets don't need DMA mapping

[Peter Chen]

On 21-01-14 11:59:07, Daewoong Kim wrote:
> DMA mapping of urb->setup_packet is not necessary for xHCI host
> controllers. The xHCI specification says that Setup Stage TRB includes
> whole Setup Data; therefore, urb->setup_dma will not be used in the xhci
> HCD code.
> 

How about bypass map/unmap operation for xHCI control transfer directly?

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 91ab81c3fc79..0a0ab14b7638 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1374,7 +1374,8 @@ static int xhci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 
 	xhci = hcd_to_xhci(hcd);
 
-	if (xhci_urb_suitable_for_idt(urb))
+	if (xhci_urb_suitable_for_idt(urb) ||
+		(usb_endpoint_xfer_control(&urb->ep->desc)))
 		return 0;
 
 	if (xhci->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK) {
@@ -1389,6 +1390,9 @@ static void xhci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
 	struct xhci_hcd *xhci;
 	bool unmap_temp_buf = false;
 
+	if (usb_endpoint_xfer_control(&urb->ep->desc))
+		return;
+
 	xhci = hcd_to_xhci(hcd);
 
 	if (urb->num_sgs && (urb->transfer_flags & URB_DMA_MAP_SINGLE))
> Signed-off-by: Daewoong Kim <daewoong00.kim@xxxxxxx>
> ---
>  drivers/usb/core/hcd.c  | 4 +++-
>  drivers/usb/host/xhci.c | 1 +
>  include/linux/usb.h     | 4 ++++
>  3 files changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
> index ad5a0f405a75..b1f9eac93f0d 100644
> --- a/drivers/usb/core/hcd.c
> +++ b/drivers/usb/core/hcd.c
> @@ -1411,7 +1411,9 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
>  	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
>  		if (hcd->self.uses_pio_for_control)
>  			return ret;
> -		if (hcd->localmem_pool) {
> +		if (hcd->self.uses_pio_for_setup_pkt) {
> +			;	/* do nothing */
> +		} else if (hcd->localmem_pool) {
>  			ret = hcd_alloc_coherent(
>  					urb->dev->bus, mem_flags,
>  					&urb->setup_dma,
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index e86940571b4c..c263aee82dc0 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -643,6 +643,7 @@ int xhci_run(struct usb_hcd *hcd)
>  	 */
>  
>  	hcd->uses_new_polling = 1;
> +	hcd->self.uses_pio_for_setup_pkt = 1;
>  	if (!usb_hcd_is_primary_hcd(hcd))
>  		return xhci_run_finished(xhci);
>  
> diff --git a/include/linux/usb.h b/include/linux/usb.h
> index 7d72c4e0713c..76600e8de414 100644
> --- a/include/linux/usb.h
> +++ b/include/linux/usb.h
> @@ -430,6 +430,10 @@ struct usb_bus {
>  					 * Does the host controller use PIO
>  					 * for control transfers?
>  					 */
> +	u8 uses_pio_for_setup_pkt;	/*
> +					 * Does the host controller use PIO
> +					 * for setup packets?
> +					 */
>  	u8 otg_port;			/* 0, or number of OTG/HNP port */
>  	unsigned is_b_host:1;		/* true during some HNP roleswitches */
>  	unsigned b_hnp_enable:1;	/* OTG: did A-Host enable HNP? */
> -- 
> 2.17.1
> 

-- 

Thanks,
Peter Chen