Re: [PATCH 3/4] ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmux

[Andreas Kemnade]

please ignore, that was accidentially sent.

On Wed, 13 Jan 2021 00:15:47 +0100
Andreas Kemnade <andreas@xxxxxxxxxxxx> wrote:

> Configuration was correct enough to work with the pre-configuration done by
> uboot. While at it, also document the location.
> 
> Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/imx6sl-tolino-shine3.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
> index 27143ea0f0f1..62d2ebda04ff 100644
> --- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
> +++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
> @@ -156,7 +156,7 @@
>  	pinctrl_uart1: uart1grp {
>  		fsl,pins = <
>  			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
> -			MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
> +			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
>  		>;  
>  	};
>