Re: [PATCH] mmc: sdhci-pci-gli: Add a switch to enable/disable CQHCI support

[Ulf Hansson]

On Wed, 6 Jan 2021 at 09:53, Renius Chen <reniuschengl@xxxxxxxxx> wrote:
>
> Add a vendor-specific bit named GLI_9763E_MB_ERP_ON at the bit7 of
> register 888h to decide whether to enhance random R/W performance
> of GL9763E. CQHCI support will be enabled if and only if the bit is
> set and the GLI_9763E_MB_CMQ_OFF bit is not set.
>
> Signed-off-by: Renius Chen <reniuschengl@xxxxxxxxx>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  drivers/mmc/host/sdhci-pci-gli.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index b85edd62e7f0..c6a107d7c742 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -84,6 +84,7 @@
>  #define   GLI_9763E_VHS_REV_W      0x2
>  #define PCIE_GLI_9763E_MB       0x888
>  #define   GLI_9763E_MB_CMDQ_OFF           BIT(19)
> +#define   GLI_9763E_MB_ERP_ON      BIT(7)
>  #define PCIE_GLI_9763E_SCR      0x8E0
>  #define   GLI_9763E_SCR_AXI_REQ           BIT(9)
>
> @@ -814,7 +815,8 @@ static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
>
>         pci_read_config_dword(pdev, PCIE_GLI_9763E_MB, &value);
>         if (!(value & GLI_9763E_MB_CMDQ_OFF))
> -               host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
> +               if (value & GLI_9763E_MB_ERP_ON)
> +                       host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
>
>         gli_pcie_enable_msi(slot);
>         host->mmc_host_ops.hs400_enhanced_strobe =
> --
> 2.27.0
>