Re: [PATCH 1/2] PCI/ASPM: Disable ASPM until its LTR and L1ss state is restored

From: Bjorn Helgaas
Date: Tue Jan 12 2021 - 17:33:13 EST


Hi Victor,

Thanks for the patch. Improving suspend/resume performance is always
a good thing!

On Tue, Jan 12, 2021 at 04:02:04AM +0000, Victor Ding wrote:
> Right after powering up, the device may have ASPM enabled; however,
> its LTR and/or L1ss controls may not be in the desired states; hence,
> the device may enter L1.2 undesirably and cause resume performance
> penalty. This is especially problematic if ASPM related control
> registers are modified before a suspension.

s/L1ss/L1SS/ (several occurrences) to match existing usage.

> Therefore, ASPM should disabled until its LTR and L1ss states are
> fully restored.
>
> Signed-off-by: Victor Ding <victording@xxxxxxxxxx>
> ---
>
> drivers/pci/pci.c | 11 +++++++++++
> drivers/pci/pci.h | 2 ++
> drivers/pci/pcie/aspm.c | 2 +-
> 3 files changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index eb323af34f1e..428de433f2e6 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -1660,6 +1660,17 @@ void pci_restore_state(struct pci_dev *dev)
> if (!dev->state_saved)
> return;
>
> + /*
> + * Right after powering up, the device may have ASPM enabled;

I think this could be stated more precisely. "Right after powering
up," ASPM should be *disabled* because ASPM Control in the Link
Control register powers up as zero (disabled).

> + * however, its LTR and/or L1ss controls may not be in the desired
> + * states; as a result, the device may enter L1.2 undesirably and
> + * cause resume performance penalty.
> + * Therefore, ASPM is disabled until its LTR and L1ss states are
> + * fully restored.
> + * (enabling ASPM is part of pci_restore_pcie_state)

If we're enabling L1.2 before LTR has been configured, that's
definitely a bug. But I don't see how that happens. The current code
looks like:

pci_restore_state
pci_restore_ltr_state
pci_write_config_word(dev, ltr + PCI_LTR_MAX_SNOOP_LAT, *cap++)
pci_write_config_word(dev, ltr + PCI_LTR_MAX_NOSNOOP_LAT, *cap++)
pci_restore_aspm_l1ss_state
pci_write_config_dword(dev, aspm_l1ss + PCI_L1SS_CTL1, *cap++)
pci_restore_pcie_state
pcie_capability_write_word(dev, PCI_EXP_LNKCTL, cap[i++])

We *do* restore PCI_L1SS_CTL1, which contains "ASPM L1.2 Enable",
before we restore PCI_EXP_LNKCTL, which contains "ASPM Control", but I
don't think "ASPM L1.2 Enable" by itself should be enough to allow
hardware to enter L1.2.

Reading PCIe r5.0, sec 5.5.1, it seems like hardware should ignore the
PCI_L1SS_CTL1 bits unless ASPM L1 entry is enabled in PCI_EXP_LNKCTL.

What am I missing?

> + */
> + pcie_config_aspm_dev(dev, 0);
> +
> /*
> * Restore max latencies (in the LTR capability) before enabling
> * LTR itself (in the PCIe capability).
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index e9ea5dfaa3e0..f774bd6d2555 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -564,6 +564,7 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev);
> void pcie_aspm_exit_link_state(struct pci_dev *pdev);
> void pcie_aspm_pm_state_change(struct pci_dev *pdev);
> void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
> +void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val);
> void pci_save_aspm_l1ss_state(struct pci_dev *dev);
> void pci_restore_aspm_l1ss_state(struct pci_dev *dev);
> #else
> @@ -571,6 +572,7 @@ static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
> static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
> static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
> static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
> +static inline void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val) { }
> static inline void pci_save_aspm_l1ss_state(struct pci_dev *dev) { }
> static inline void pci_restore_aspm_l1ss_state(struct pci_dev *dev) { }
> #endif
> diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
> index a08e7d6dc248..45535b4e1595 100644
> --- a/drivers/pci/pcie/aspm.c
> +++ b/drivers/pci/pcie/aspm.c
> @@ -778,7 +778,7 @@ void pci_restore_aspm_l1ss_state(struct pci_dev *dev)
> pci_write_config_dword(dev, aspm_l1ss + PCI_L1SS_CTL2, *cap++);
> }
>
> -static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
> +void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
> {
> pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL,
> PCI_EXP_LNKCTL_ASPMC, val);
> --
> 2.30.0.284.gd98b1dd5eaa7-goog
>