Re: [PATCH v1 0/2] Add 100 base-x mode

[Bjarni Jonasson]

On Mon, 2021-01-11 at 14:18 +0000, Russell King - ARM Linux admin
wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
> 
> On Mon, Jan 11, 2021 at 02:06:55PM +0100, Bjarni Jonasson wrote:
> > Adding support for 100 base-x in phylink.
> > The Sparx5 switch supports 100 base-x pcs (IEEE 802.3 Clause 24)
> > 4b5b encoded.
> > These patches adds phylink support for that mode.
> > 
> > Tested in Sparx5, using sfp modules:
> > Axcen 100fx AXFE-1314-0521
> > Cisco GLC-FE-100LX
> > HP SFP 100FX J9054C
> > Excom SFP-SX-M1002
> 
> For each of these modules, please send me:
> 
> ethtool -m ethx raw on > module.bin
> 
> so I can validate future changes with these modules. Thanks.
> 
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

I've included the dump from ethtool for:
Axcen 100fx AXFE-1314-0521
Axcen 100lx AXFE-1314-0551
Excom SFP-SX-M1002
HP SFP 100FX J9054C
The "ethtool raw" output seems a bit garbled so I added the hex output
as well.

Rgds
--
Bjarni Jonasson
Microchip

Attachment: axcen_100fx_axfe_1314_0521.bin
Description: Binary data

Attachment: axcen_100lx_axfe_1314_0551.bin
Description: Binary data

Attachment: excom_sfp_sx_m1002.bin
Description: Binary data

Attachment: hp_100fx_j9054c.bin
Description: Binary data