[PATCH 0/9] Config and devicetree updates for the Librem 5 phone

[Martin Kepplinger]

This is another set of updates in order to maintain support for the
Librem 5 phone:

Guido Günther (5):
  arm64: defconfig: Enable vibra-pwm
  arm64: dts: imx8mq-librem5: Mark charger IRQ as High-Z
  arm64: dts: imx8mq-librem5: Don't mark buck3 as always on
  arm64: dts: imx8mq-librem5: Add usb-c chip as supplier for the charger
  arm64: dts: imx8mq-librem5: Add LCD_1V8 regulator

Martin Kepplinger (4):
  arm64: dts: imx8mq-librem5: enable the LCD panel
  arm64: dts: imx8mq-librem5: set regulators boot-on
  arm64: dts: Add Librem5 Evergreen
  dt-bindings: arm: fsl: Add the librem 5 Evergreen revision

 .../devicetree/bindings/arm/fsl.yaml          |  1 +
 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 .../boot/dts/freescale/imx8mq-librem5-r4.dts  | 35 ++++++++
 .../boot/dts/freescale/imx8mq-librem5.dtsi    | 83 ++++++++++++++++++-
 arch/arm64/configs/defconfig                  |  1 +
 5 files changed, 117 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts

-- 
2.20.1