Re: [PATCH v2] USB:ehci:fix an interrupt calltrace error

[Alan Stern]

On Mon, Jan 11, 2021 at 07:29:37PM +0800, Longfang Liu wrote:
> The system that use Synopsys USB host controllers goes to suspend
> when using USB audio player. This causes the USB host controller
> continuous send interrupt signal to system, When the number of
> interrupts exceeds 100000, the system will forcibly close the
> interrupts and output a calltrace error.
> 
> When the system goes to suspend, the last interrupt is reported to
> the driver. At this time, the system has set the state to suspend.
> This causes the last interrupt to not be processed by the system and
> not clear the interrupt flag. This uncleared interrupt flag constantly
> triggers new interrupt event. This causing the driver to receive more
> than 100,000 interrupts, which causes the system to forcibly close the
> interrupt report and report the calltrace error.
> 
> so, when the driver goes to sleep and changes the system state to
> suspend, the interrupt flag needs to be cleared.
> 
> Signed-off-by: Longfang Liu <liulongfang@xxxxxxxxxx>

Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>

> ---
> 
> Changes in v2:
> - updated cleared registers
> 
>  drivers/usb/host/ehci-hub.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
> index ce0eaf7..a99c1ac 100644
> --- a/drivers/usb/host/ehci-hub.c
> +++ b/drivers/usb/host/ehci-hub.c
> @@ -346,8 +346,12 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
>  
>  	unlink_empty_async_suspended(ehci);
>  
> +	/* Some Synopsys controllers mistakenly leave IAA turned on */
> +	ehci_writel(ehci, STS_IAA, &ehci->regs->status);
> +
>  	/* Any IAA cycle that started before the suspend is now invalid */
>  	end_iaa_cycle(ehci);
> +
>  	ehci_handle_start_intr_unlinks(ehci);
>  	ehci_handle_intr_unlinks(ehci);
>  	end_free_itds(ehci);
> -- 
> 2.8.1
>