Re: [PATCH] USB: otg: Fix error 32 when enable hardware flow control.

[gregkh@xxxxxxxxxxxxxxxxxxx]

On Mon, Jan 11, 2021 at 04:55:22AM +0000, Pho Tran wrote:
> When hardware flow control is enabled,
> don't allow host send MHS command to cp210x.
> 
> Signed-off-by: Pho Tran<pho.tran@xxxxxxxxxx>

Nit, you need a ' ' before the '<' character.

And why didn't you send this to the maintainer of this file as described
by scripts/get_maintainer.pl?

Please do so when you fix things up and send the next version.

> ---
>  drivers/usb/serial/cp210x.c | 32 +++++++++++++++++++++++++++++++-
>  1 file changed, 31 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
> index fbb10dfc56e3..f231cecdaf7d 100644
> --- a/drivers/usb/serial/cp210x.c
> +++ b/drivers/usb/serial/cp210x.c
> @@ -1204,6 +1204,7 @@ static int cp210x_tiocmset(struct tty_struct *tty,
>  		unsigned int set, unsigned int clear)
>  {
>  	struct usb_serial_port *port = tty->driver_data;
> +
>  	return cp210x_tiocmset_port(port, set, clear);
>  }
>  

Unneeded change :(


> @@ -1211,6 +1212,11 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
>  		unsigned int set, unsigned int clear)
>  {
>  	u16 control = 0;
> +	struct cp210x_flow_ctl flow_ctl;
> +	u32 ctl_hs = 0;
> +	u32 flow_repl = 0;
> +	bool auto_dtr = false;
> +	bool auto_rts = false;
>  
>  	if (set & TIOCM_RTS) {
>  		control |= CONTROL_RTS;
> @@ -1230,6 +1236,30 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
>  	}
>  
>  	dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
> +	/*
> +	 *	Don't send MHS command if device in hardware flowcontrol mode
> +	 */

Why the giant comment?

> +	cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
> +				sizeof(flow_ctl));
> +	ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
> +	flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
> +
> +	if (CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_FLOW_CTL)
> +		== (ctl_hs & CP210X_SERIAL_DTR_MASK))

Very odd indentation :(

> +		auto_dtr = true;
> +	else
> +		auto_dtr = false;
> +
> +	if (CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL)
> +		== (flow_repl & CP210X_SERIAL_RTS_MASK))
> +		auto_rts = true;
> +	else
> +		auto_rts = false;
> +
> +	if (auto_dtr || auto_rts) {
> +		dev_dbg(&port->dev, "Don't set MHS when while device in flow control mode\n");
> +		return 0;
> +	}
>  
>  	return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
>  }
> @@ -1256,7 +1286,7 @@ static int cp210x_tiocmget(struct tty_struct *tty)
>  		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
>  		|((control & CONTROL_CTS) ? TIOCM_CTS : 0)
>  		|((control & CONTROL_DSR) ? TIOCM_DSR : 0)
> -		|((control & CONTROL_RING)? TIOCM_RI  : 0)
> +		|((control & CONTROL_RING) ? TIOCM_RI  : 0)

Do not mix whitespace changes with logic changes in the same patch, that
is a sure way to get your patch rejected.

thanks,

greg k-h