[PATCH 6/7] dt-bindings: regulator: qcom-labibb: Document SCP/OCP interrupts

[AngeloGioacchino Del Regno]

Short-Circuit Protection (SCP) and Over-Current Protection (OCP) are
now implemented in the driver: document the interrupts.
This also fixes wrong documentation about the SCP interrupt for LAB.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
---
 .../regulator/qcom-labibb-regulator.yaml      | 20 +++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
index 1cdaff66fdb9..8cf883d78a45 100644
--- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -28,9 +28,10 @@ properties:
         default: 200
 
       interrupts:
-        maxItems: 1
+        minItems: 1
+        maxItems: 2
         description:
-          Short-circuit interrupt for lab.
+          Short-circuit and over-current interrupts for lab.
 
     required:
       - interrupts
@@ -45,9 +46,10 @@ properties:
         default: 300
 
       interrupts:
-        maxItems: 1
+        minItems: 1
+        maxItems: 2
         description:
-          Short-circuit interrupt for lab.
+          Short-circuit and over-current interrupts for ibb.
 
     required:
       - interrupts
@@ -65,13 +67,15 @@ examples:
       compatible = "qcom,pmi8998-lab-ibb";
 
       lab {
-        interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>;
-        interrupt-names = "sc-err";
+        interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+                     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "sc-err", "ocp";
       };
 
       ibb {
-        interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>;
-        interrupt-names = "sc-err";
+        interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+                     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "sc-err", "ocp";
       };
     };
 
-- 
2.29.2