[PATCH] regulator: bd718x7: Stop using parent data

From: Matti Vaittinen
Date: Thu Jan 07 2021 - 07:25:20 EST


The ROHM PMIC regulator drivers only need the regmap pointer from
the parent device. Regmap can be obtained via dev_get_regmap()
so do not require parent to populate driver data for that.

Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
---
Sorry for not including this in previous cleanup patch I sent yesterday.

This is last user for MFD struct struct bd718xx - so I thought of sending
this together with the MFD change - and the MFD change was still partially
unfinished. Well, I just noticed the MFD can't be applied before the clk
portion (which I already sent) is applied - so I must anyways wait for the
clk before sending the MFD. Well, I guess I can send out the regulator
bits as well as I now anyways need to manally poll the clk to be applied
before sending the MFD.

drivers/regulator/bd718x7-regulator.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
index 0774467994fb..454ffec62f4f 100644
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -1349,7 +1349,7 @@ static int get_hw_controlled_regulators(struct device *dev,

static int bd718xx_probe(struct platform_device *pdev)
{
- struct bd718xx *mfd;
+ struct regmap *regmap;
struct regulator_config config = { 0 };
int i, j, err, omit_enable;
bool use_snvs;
@@ -1358,11 +1358,10 @@ static int bd718xx_probe(struct platform_device *pdev)
enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
const struct regulator_ops **swops, **hwops;

- mfd = dev_get_drvdata(pdev->dev.parent);
- if (!mfd) {
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap) {
dev_err(&pdev->dev, "No MFD driver data\n");
- err = -EINVAL;
- goto err;
+ return -EINVAL;
}

switch (chip) {
@@ -1385,7 +1384,7 @@ static int bd718xx_probe(struct platform_device *pdev)
}

/* Register LOCK release */
- err = regmap_update_bits(mfd->chip.regmap, BD718XX_REG_REGLOCK,
+ err = regmap_update_bits(regmap, BD718XX_REG_REGLOCK,
(REGLOCK_PWRSEQ | REGLOCK_VREG), 0);
if (err) {
dev_err(&pdev->dev, "Failed to unlock PMIC (%d)\n", err);
@@ -1404,8 +1403,7 @@ static int bd718xx_probe(struct platform_device *pdev)
* bit allowing HW defaults for power rails to be used
*/
if (!use_snvs) {
- err = regmap_update_bits(mfd->chip.regmap,
- BD718XX_REG_TRANS_COND1,
+ err = regmap_update_bits(regmap, BD718XX_REG_TRANS_COND1,
BD718XX_ON_REQ_POWEROFF_MASK |
BD718XX_SWRESET_POWEROFF_MASK |
BD718XX_WDOG_POWEROFF_MASK |
@@ -1421,7 +1419,7 @@ static int bd718xx_probe(struct platform_device *pdev)
}

config.dev = pdev->dev.parent;
- config.regmap = mfd->chip.regmap;
+ config.regmap = regmap;
/*
* There are cases when we want to leave the enable-control for
* the HW state machine and use this driver only for voltage control.
@@ -1478,7 +1476,7 @@ static int bd718xx_probe(struct platform_device *pdev)
if (!no_enable_control && (!use_snvs ||
!rdev->constraints->always_on ||
!rdev->constraints->boot_on)) {
- err = regmap_update_bits(mfd->chip.regmap, r->init.reg,
+ err = regmap_update_bits(regmap, r->init.reg,
r->init.mask, r->init.val);
if (err) {
dev_err(&pdev->dev,
@@ -1488,7 +1486,7 @@ static int bd718xx_probe(struct platform_device *pdev)
}
}
for (j = 0; j < r->additional_init_amnt; j++) {
- err = regmap_update_bits(mfd->chip.regmap,
+ err = regmap_update_bits(regmap,
r->additional_inits[j].reg,
r->additional_inits[j].mask,
r->additional_inits[j].val);

base-commit: 2c85ebc57b3e1817b6ce1a6b703928e113a90442
--
2.25.4


--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]