[PATCH v6 0/5] mainline Kverneland boards

From: Oleksij Rempel
Date: Thu Jan 07 2021 - 05:10:20 EST


changes v6:
- move startup-delay-us close to gpio property
- rename video@5c to video-decoder@5c
- sort out some spaces
- use defines for linux,code and linux,axis

changes v5:
- reorder kvg prefix
- add Acked-by: Rob Herring..

changes v4:
- fix active level of SPI CS GPIOs

changes v3:
- add vicutp board
- change tvnorm to sdtv-standards
- change linux,default-trigger "mmc" to "disk-activity";
- add power-supply property to the panel node

changes v2:
- add victgo board
- diff fixes for vicut1.dtsi

Oleksij Rempel (5):
dt-bindings: vendor-prefixes: Add an entry for Kverneland Group
dt-bindings: arm: fsl: add Kverneland UT1, UT1Q and UI1P boards
ARM: dts: add Kverneland UT1, UT1Q and UT1P
dt-bindings: arm: fsl: add Kverneland TGO board
ARM: dts: add Kverneland TGO board

.../devicetree/bindings/arm/fsl.yaml | 4 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/Makefile | 4 +
arch/arm/boot/dts/imx6dl-victgo.dts | 850 ++++++++++++++++++
arch/arm/boot/dts/imx6dl-vicut1.dts | 13 +
arch/arm/boot/dts/imx6q-vicut1.dts | 17 +
arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 803 +++++++++++++++++
arch/arm/boot/dts/imx6qp-vicutp.dts | 13 +
8 files changed, 1706 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-victgo.dts
create mode 100644 arch/arm/boot/dts/imx6dl-vicut1.dts
create mode 100644 arch/arm/boot/dts/imx6q-vicut1.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-vicut1.dtsi
create mode 100644 arch/arm/boot/dts/imx6qp-vicutp.dts

--
2.30.0