Re: [PATCH] arm64: dts: imx8mm-beacon: Fix WiFi Pinmuxing

From: Adam Ford
Date: Tue Jan 05 2021 - 07:49:07 EST


On Mon, Jan 4, 2021 at 9:03 PM Shawn Guo <shawnguo@xxxxxxxxxx> wrote:
>
> On Wed, Dec 02, 2020 at 07:59:50AM -0600, Adam Ford wrote:
> > The WiFi chip is capable of communication at SDR104 speeds, and
> > the pinmux was configured to support this, but the sdhc1 controller
> > didn't properly reference the pinmux. Enable 100Mhz and 200MHz pinmux
> > as was originally intended.
> >
> > Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")
>
> This looks more like an improvement than bug fix.

Do you want me to resubmit without the fixes tag?

adam
>
> Shawn
>
> > Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> > index 6de86a4f0ec4..90fd15e95798 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> > @@ -217,8 +217,10 @@
> > &usdhc1 {
> > #address-cells = <1>;
> > #size-cells = <0>;
> > - pinctrl-names = "default";
> > + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > pinctrl-0 = <&pinctrl_usdhc1>;
> > + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> > + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> > bus-width = <4>;
> > non-removable;
> > cap-power-off-card;
> > --
> > 2.17.1
> >