Re: [PATCH v3] RISC-V: enable XIP

From: Bin Meng
Date: Mon Dec 21 2020 - 20:45:02 EST


Hi Vitaly,

On Tue, Dec 22, 2020 at 4:39 AM Vitaly Wool <vitaly.wool@xxxxxxxxxxxx> wrote:
>
> Introduce XIP (eXecute In Place) support for RISC-V platforms.
> It allows code to be executed directly from non-volatile storage
> directly addressable by the CPU, such as QSPI NOR flash which can
> be found on many RISC-V platforms. This makes way for significant
> optimization of RAM footprint. The XIP kernel is not compressed
> since it has to run directly from flash, so it will occupy more
> space on the non-volatile storage to The physical flash address
> used to link the kernel object files and for storing it has to
> be known at compile time and is represented by a Kconfig option.
>
> XIP on RISC-V will currently only work on MMU-enabled kernels.
>
> Changed in v2:
> - dedicated macro for XIP address fixup when MMU is not enabled yet
> o both for 32-bit and 64-bit RISC-V
> - SP is explicitly set to a safe place in RAM before __copy_data call
> - removed redundant alignment requirements in vmlinux-xip.lds.S
> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
>
> Changed in v3:
> - rebased against latest for-next
> - XIP address fixup macro now takes an argument
> - SMP related fixes

The above changelogs should go below ---

> Signed-off-by: Vitaly Wool <vitaly.wool@xxxxxxxxxxxx>
> ---
> arch/riscv/Kconfig | 46 ++++++++-
> arch/riscv/Makefile | 8 +-
> arch/riscv/boot/Makefile | 13 +++
> arch/riscv/include/asm/pgtable.h | 56 +++++++++--
> arch/riscv/kernel/cpu_ops_sbi.c | 3 +
> arch/riscv/kernel/head.S | 69 +++++++++++++-
> arch/riscv/kernel/head.h | 3 +
> arch/riscv/kernel/setup.c | 8 +-
> arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++
> arch/riscv/kernel/vmlinux.lds.S | 6 ++
> arch/riscv/mm/init.c | 142 +++++++++++++++++++++++++---
> 11 files changed, 460 insertions(+), 26 deletions(-)
> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>

Regards,
Bin