Re: [PATCH] zsmalloc: do not use bit_spin_lock

[Vitaly Wool]

On Mon, Dec 21, 2020 at 10:30 PM Song Bao Hua (Barry Song)
<song.bao.hua@xxxxxxxxxxxxx> wrote:
>
>
>
> > -----Original Message-----
> > From: Shakeel Butt [mailto:shakeelb@xxxxxxxxxx]
> > Sent: Tuesday, December 22, 2020 10:03 AM
> > To: Song Bao Hua (Barry Song) <song.bao.hua@xxxxxxxxxxxxx>
> > Cc: Vitaly Wool <vitaly.wool@xxxxxxxxxxxx>; Minchan Kim <minchan@xxxxxxxxxx>;
> > Mike Galbraith <efault@xxxxxx>; LKML <linux-kernel@xxxxxxxxxxxxxxx>; linux-mm
> > <linux-mm@xxxxxxxxx>; Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>;
> > NitinGupta <ngupta@xxxxxxxxxx>; Sergey Senozhatsky
> > <sergey.senozhatsky.work@xxxxxxxxx>; Andrew Morton
> > <akpm@xxxxxxxxxxxxxxxxxxxx>
> > Subject: Re: [PATCH] zsmalloc: do not use bit_spin_lock
> >
> > On Mon, Dec 21, 2020 at 12:06 PM Song Bao Hua (Barry Song)
> > <song.bao.hua@xxxxxxxxxxxxx> wrote:
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: Shakeel Butt [mailto:shakeelb@xxxxxxxxxx]
> > > > Sent: Tuesday, December 22, 2020 8:50 AM
> > > > To: Vitaly Wool <vitaly.wool@xxxxxxxxxxxx>
> > > > Cc: Minchan Kim <minchan@xxxxxxxxxx>; Mike Galbraith <efault@xxxxxx>; LKML
> > > > <linux-kernel@xxxxxxxxxxxxxxx>; linux-mm <linux-mm@xxxxxxxxx>; Song Bao
> > Hua
> > > > (Barry Song) <song.bao.hua@xxxxxxxxxxxxx>; Sebastian Andrzej Siewior
> > > > <bigeasy@xxxxxxxxxxxxx>; NitinGupta <ngupta@xxxxxxxxxx>; Sergey
> > Senozhatsky
> > > > <sergey.senozhatsky.work@xxxxxxxxx>; Andrew Morton
> > > > <akpm@xxxxxxxxxxxxxxxxxxxx>
> > > > Subject: Re: [PATCH] zsmalloc: do not use bit_spin_lock
> > > >
> > > > On Mon, Dec 21, 2020 at 11:20 AM Vitaly Wool <vitaly.wool@xxxxxxxxxxxx>
> > wrote:
> > > > >
> > > > > On Mon, Dec 21, 2020 at 6:24 PM Minchan Kim <minchan@xxxxxxxxxx> wrote:
> > > > > >
> > > > > > On Sun, Dec 20, 2020 at 02:22:28AM +0200, Vitaly Wool wrote:
> > > > > > > zsmalloc takes bit spinlock in its _map() callback and releases it
> > > > > > > only in unmap() which is unsafe and leads to zswap complaining
> > > > > > > about scheduling in atomic context.
> > > > > > >
> > > > > > > To fix that and to improve RT properties of zsmalloc, remove that
> > > > > > > bit spinlock completely and use a bit flag instead.
> > > > > >
> > > > > > I don't want to use such open code for the lock.
> > > > > >
> > > > > > I see from Mike's patch, recent zswap change introduced the lockdep
> > > > > > splat bug and you want to improve zsmalloc to fix the zswap bug and
> > > > > > introduce this patch with allowing preemption enabling.
> > > > >
> > > > > This understanding is upside down. The code in zswap you are referring
> > > > > to is not buggy.  You may claim that it is suboptimal but there is
> > > > > nothing wrong in taking a mutex.
> > > > >
> > > >
> > > > Is this suboptimal for all or just the hardware accelerators? Sorry, I
> > > > am not very familiar with the crypto API. If I select lzo or lz4 as a
> > > > zswap compressor will the [de]compression be async or sync?
> > >
> > > Right now, in crypto subsystem, new drivers are required to write based on
> > > async APIs. The old sync API can't work in new accelerator drivers as they
> > > are not supported at all.
> > >
> > > Old drivers are used to sync, but they've got async wrappers to support async
> > > APIs. Eg.
> > > crypto: acomp - add support for lz4 via scomp
> > >
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/
> > crypto/lz4.c?id=8cd9330e0a615c931037d4def98b5ce0d540f08d
> > >
> > > crypto: acomp - add support for lzo via scomp
> > >
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/
> > crypto/lzo.c?id=ac9d2c4b39e022d2c61486bfc33b730cfd02898e
> > >
> > > so they are supporting async APIs but they are still working in sync mode
> > as
> > > those old drivers don't sleep.
> > >
> >
> > Good to know that those are sync because I want them to be sync.
> > Please note that zswap is a cache in front of a real swap and the load
> > operation is latency sensitive as it comes in the page fault path and
> > directly impacts the applications. I doubt decompressing synchronously
> > a 4k page on a cpu will be costlier than asynchronously decompressing
> > the same page from hardware accelerators.
>
> If you read the old paper:
> https://www.ibm.com/support/pages/new-linux-zswap-compression-functionality
> Because the hardware accelerator speeds up compression, looking at the zswap
> metrics we observed that there were more store and load requests in a given
> amount of time, which filled up the zswap pool faster than a software
> compression run. Because of this behavior, we set the max_pool_percent
> parameter to 30 for the hardware compression runs - this means that zswap
> can use up to 30% of the 10GB of total memory.
>
> So using hardware accelerators, we get a chance to speed up compression
> while decreasing cpu utilization.
>
> BTW, If it is not easy to change zsmalloc, one quick workaround we might do
> in zswap is adding the below after applying Mike's original patch:
>
> if(in_atomic()) /* for zsmalloc */
>         while(!try_wait_for_completion(&req->done);
> else /* for zbud, z3fold */
>         crypto_wait_req(....);

I don't think I'm going to ack this, sorry.

Best regards,
   Vitaly

> crypto_wait_req() is actually doing wait_for_completion():
> static inline int crypto_wait_req(int err, struct crypto_wait *wait)
> {
>         switch (err) {
>         case -EINPROGRESS:
>         case -EBUSY:
>                 wait_for_completion(&wait->completion);
>                 reinit_completion(&wait->completion);
>                 err = wait->err;
>                 break;
>         }
>
>         return err;
> }
>
> Thanks
> Barry