[PATCH v1 3/4] Bluetooth: btusb: Enable MSFT extension for Intel controllers

From: Miao-chen Chou
Date: Thu Dec 17 2020 - 02:19:09 EST


The Intel JeffersonPeak, HarrisonPeak and CyclonePeak Bluetooth
controllers support the Microsoft vendor extension and they are using
0xFC1E for VsMsftOpCode.

< HCI Command: Vendor (0x3f|0x001e) plen 1
00
> HCI Event: Command Complete (0x0e) plen 15
Vendor (0x3f|0x001e) ncmd 1
Status: Success (0x00)
00 3f 00 00 00 00 00 00 00 01 50

The following test step was performed.
- Boot the test devices with HarrisonPeak and verify INFO print in
dmesg.

Signed-off-by: Miao-chen Chou <mcchou@xxxxxxxxxxxx>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>
Reviewed-by: Archie Pusaka <apusaka@xxxxxxxxxxxx>
---

drivers/bluetooth/btusb.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 03b83aa912779..25cfa47995a8a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2924,7 +2924,10 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* extension are using 0xFC1E for VsMsftOpCode.
*/
switch (ver.hw_variant) {
+ case 0x11: /* JfP */
case 0x12: /* ThP */
+ case 0x13: /* HrP */
+ case 0x14: /* CcP */
hci_set_msft_opcode(hdev, 0xFC1E);
break;
}
--
2.29.2.684.gfbc64c5ab5-goog