[PATCH v2] arch: x86: make video init optional (expert)

From: Enrico Weigelt, metux IT consult
Date: Tue Dec 15 2020 - 14:12:44 EST


As x86 is becoming more widespread in embedded devices, that don't have
any video adapter at all, make it possible to opt out from video init on
bootup (expert option). Also useful for minimized paravirtualized kernels.

Most users want to leave this enabled and shouldn't touch it, thus defaulting
to y and hiding behind CONFIG_EXPERT.

Signed-off-by: Enrico Weigelt <info@xxxxxxxxx>

---

changes v2: fixed spelling in commit message and kconfig help text
---
arch/x86/Kconfig | 7 +++++++
arch/x86/boot/Makefile | 10 +++++-----
arch/x86/boot/main.c | 2 ++
3 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index eeb87fce9c6f..8eba95a6bc24 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -916,6 +916,13 @@ config DMI
affected by entries in the DMI blacklist. Required by PNP
BIOS code.

+config X86_BOOT_VIDEO
+ default y
+ bool "Setup video on boot" if EXPERT
+ help
+ Enable setting video mode on boot. Say Y here unless your machine
+ doesn't have any video adapter. (e.g., embedded systems or VMs)
+
config GART_IOMMU
bool "Old AMD GART IOMMU support"
select DMA_OPS
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index fe605205b4ce..7f67e1118a99 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -34,17 +34,17 @@ subdir- := compressed

setup-y += a20.o bioscall.o cmdline.o copy.o cpu.o cpuflags.o cpucheck.o
setup-y += early_serial_console.o edd.o header.o main.o memory.o
-setup-y += pm.o pmjump.o printf.o regs.o string.o tty.o video.o
-setup-y += video-mode.o version.o
+setup-y += pm.o pmjump.o printf.o regs.o string.o tty.o version.o
setup-$(CONFIG_X86_APM_BOOT) += apm.o
+setup-$(CONFIG_X86_BOOT_VIDEO) += video.o video-mode.o

# The link order of the video-*.o modules can matter. In particular,
# video-vga.o *must* be listed first, followed by video-vesa.o.
# Hardware-specific drivers should follow in the order they should be
# probed, and video-bios.o should typically be last.
-setup-y += video-vga.o
-setup-y += video-vesa.o
-setup-y += video-bios.o
+setup-$(CONFIG_X86_BOOT_VIDEO) += video-vga.o
+setup-$(CONFIG_X86_BOOT_VIDEO) += video-vesa.o
+setup-$(CONFIG_X86_BOOT_VIDEO) += video-bios.o

targets += $(setup-y)
hostprogs := tools/build
diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c
index e3add857c2c9..61cab92f9a8e 100644
--- a/arch/x86/boot/main.c
+++ b/arch/x86/boot/main.c
@@ -174,7 +174,9 @@ void main(void)
#endif

/* Set the video mode */
+#if defined(CONFIG_X86_BOOT_VIDEO)
set_video();
+#endif

/* Do the last things and invoke protected mode */
go_to_protected_mode();
--
2.11.0