Re: [PATCH v5 2/8] dt-bindings: media: max9286: Document 'maxim,initial-reverse-channel-mV'

From: Jacopo Mondi
Date: Tue Dec 15 2020 - 07:09:45 EST


Hi Geert,

On Tue, Dec 15, 2020 at 12:44:17PM +0100, Geert Uytterhoeven wrote:
> Hi Jacopo,
>
> On Tue, Dec 15, 2020 at 12:14 PM Jacopo Mondi <jacopo@xxxxxxxxxx> wrote:
> > On Mon, Nov 30, 2020 at 03:00:48PM -0700, Rob Herring wrote:
> > > On Mon, Nov 16, 2020 at 02:52:59PM +0100, Jacopo Mondi wrote:
> > > > Document the 'initial-reverse-channel-mV' vendor property in the
> > > > bindings document of the max9286 driver.
> > > >
> > > > The newly introduced property allows to specifying the initial
> > > > configuration of the GMSL reverse control channel to accommodate
> > > > remote serializers pre-programmed with the high threshold power
> > > > supply noise immunity enabled.
> > > >
> > > > Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
> > > > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > > > ---
> > > > .../bindings/media/i2c/maxim,max9286.yaml | 23 +++++++++++++++++++
> > > > 1 file changed, 23 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > > > index 9ea827092fdd..f61234d204fa 100644
> > > > --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > > > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > > > @@ -51,6 +51,26 @@ properties:
> > > > '#gpio-cells':
> > > > const: 2
> > > >
> > > > + maxim,initial-reverse-channel-mV:
> > >
> > > Use standard unit suffix.
> > >
> >
> > Which one ? :)
>
> Documentation/devicetree/bindings/property-units.txt
>

Oh, I had no idea we have this.
It's been here since a long time it seems, my bad
Date: Mon Feb 8 10:55:55 2016

> > I see in v5.10 one 'mV', three 'mv', one 'millivolts', several
> > 'microvolts'.
> >
> > I'll go with the majority and make this
> > 'maxim,initial-reverse-channel-mv'
>
> Wrong guess ;-)
>

Maybe a stupid question, but the fact only 'microvolts' is listed, is
an implied suggestion to use 'millivolts' for simmetry or to express
the value in micro volts ?

> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds