Re: [PATCH v2 14/21] phy: sun4i-usb: Rework "pmu_unk1" handling

From: Icenowy Zheng
Date: Sun Dec 13 2020 - 23:48:25 EST


在 2020-12-14星期一的 01:35 +0000,André Przywara写道:
> On 13/12/2020 18:24, Icenowy Zheng wrote:
> > 在 2020-12-11星期五的 01:19 +0000,Andre Przywara写道:
> > > Newer SoCs (A100, H616) need to clear a different bit in our
> > > "unknown"
> > > PMU PHY register.
> >
> > It looks like that the unknown PHY register is PHYCTL register for
> > each
> > individual PHY, and the bit that is cleared is
> > called SUNXI_HCI_PHY_CTRL_SIDDQ in the BSP (similar to
> > the USBC_PHY_CTL_SIDDQ we cleared for main PHYCTL).

In addition, both the BIT(1) in old PHYs and the BIT(3) in new PHYs are
SIDDQ. (In BSP it's a #define inside #if)

Should we add some flag for 28nm PHY?

>
> Oh, right, somehow I failed to find this in the BSP, I guess I got
> confused over that similar symbol. I will put proper names to it.

In addition, the region at 0x800 is not PMU at all, but some [OE]HCI-
related control registers. The name "PMU" can only cover the first
register here.

We may need to address this.

>
> Thanks!
> Andre
>
> > > Generalise the existing code by allowing configs to specify a
> > > bitmask
> > > of bits to clear.
> > >
> > > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> > > ---
> > > drivers/phy/allwinner/phy-sun4i-usb.c | 28 +++++++++++--------
> > > ----
> > > ----
> > > 1 file changed, 11 insertions(+), 17 deletions(-)
> > >
> > > diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c
> > > b/drivers/phy/allwinner/phy-sun4i-usb.c
> > > index 651d5e2a25ce..4ba0699e0bb4 100644
> > > --- a/drivers/phy/allwinner/phy-sun4i-usb.c
> > > +++ b/drivers/phy/allwinner/phy-sun4i-usb.c
> > > @@ -115,9 +115,9 @@ struct sun4i_usb_phy_cfg {
> > > int hsic_index;
> > > enum sun4i_usb_phy_type type;
> > > u32 disc_thresh;
> > > + u32 pmu_unk1_clrbits;
> > > u8 phyctl_offset;
> > > bool dedicated_clocks;
> > > - bool enable_pmu_unk1;
> > > bool phy0_dual_route;
> > > int missing_phys;
> > > };
> > > @@ -288,6 +288,12 @@ static int sun4i_usb_phy_init(struct phy
> > > *_phy)
> > > return ret;
> > > }
> > >
> > > + if (phy->pmu && data->cfg->pmu_unk1_clrbits) {
> > > + val = readl(phy->pmu + REG_PMU_UNK1);
> > > + val &= ~data->cfg->pmu_unk1_clrbits;
> > > + writel(val, phy->pmu + REG_PMU_UNK1);
> > > + }
> > > +
> > > if (data->cfg->type == sun8i_a83t_phy ||
> > > data->cfg->type == sun50i_h6_phy) {
> > > if (phy->index == 0) {
> > > @@ -297,11 +303,6 @@ static int sun4i_usb_phy_init(struct phy
> > > *_phy)
> > > writel(val, data->base + data->cfg-
> > > > phyctl_offset);
> > > }
> > > } else {
> > > - if (phy->pmu && data->cfg->enable_pmu_unk1) {
> > > - val = readl(phy->pmu + REG_PMU_UNK1);
> > > - writel(val & ~2, phy->pmu + REG_PMU_UNK1);
> > > - }
> > > -
> > > /* Enable USB 45 Ohm resistor calibration */
> > > if (phy->index == 0)
> > > sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN,
> > > 0x01, 1);
> > > @@ -867,7 +868,6 @@ static const struct sun4i_usb_phy_cfg
> > > sun4i_a10_cfg = {
> > > .disc_thresh = 3,
> > > .phyctl_offset = REG_PHYCTL_A10,
> > > .dedicated_clocks = false,
> > > - .enable_pmu_unk1 = false,
> > > };
> > >
> > > static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
> > > @@ -876,7 +876,6 @@ static const struct sun4i_usb_phy_cfg
> > > sun5i_a13_cfg = {
> > > .disc_thresh = 2,
> > > .phyctl_offset = REG_PHYCTL_A10,
> > > .dedicated_clocks = false,
> > > - .enable_pmu_unk1 = false,
> > > };
> > >
> > > static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
> > > @@ -885,7 +884,6 @@ static const struct sun4i_usb_phy_cfg
> > > sun6i_a31_cfg = {
> > > .disc_thresh = 3,
> > > .phyctl_offset = REG_PHYCTL_A10,
> > > .dedicated_clocks = true,
> > > - .enable_pmu_unk1 = false,
> > > };
> > >
> > > static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
> > > @@ -894,7 +892,6 @@ static const struct sun4i_usb_phy_cfg
> > > sun7i_a20_cfg = {
> > > .disc_thresh = 2,
> > > .phyctl_offset = REG_PHYCTL_A10,
> > > .dedicated_clocks = false,
> > > - .enable_pmu_unk1 = false,
> > > };
> > >
> > > static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
> > > @@ -903,7 +900,6 @@ static const struct sun4i_usb_phy_cfg
> > > sun8i_a23_cfg = {
> > > .disc_thresh = 3,
> > > .phyctl_offset = REG_PHYCTL_A10,
> > > .dedicated_clocks = true,
> > > - .enable_pmu_unk1 = false,
> > > };
> > >
> > > static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
> > > @@ -912,7 +908,6 @@ static const struct sun4i_usb_phy_cfg
> > > sun8i_a33_cfg = {
> > > .disc_thresh = 3,
> > > .phyctl_offset = REG_PHYCTL_A33,
> > > .dedicated_clocks = true,
> > > - .enable_pmu_unk1 = false,
> > > };
> > >
> > > static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
> > > @@ -929,7 +924,7 @@ static const struct sun4i_usb_phy_cfg
> > > sun8i_h3_cfg = {
> > > .disc_thresh = 3,
> > > .phyctl_offset = REG_PHYCTL_A33,
> > > .dedicated_clocks = true,
> > > - .enable_pmu_unk1 = true,
> > > + .pmu_unk1_clrbits = BIT(1),
> > > .phy0_dual_route = true,
> > > };
> > >
> > > @@ -939,7 +934,7 @@ static const struct sun4i_usb_phy_cfg
> > > sun8i_r40_cfg = {
> > > .disc_thresh = 3,
> > > .phyctl_offset = REG_PHYCTL_A33,
> > > .dedicated_clocks = true,
> > > - .enable_pmu_unk1 = true,
> > > + .pmu_unk1_clrbits = BIT(1),
> > > .phy0_dual_route = true,
> > > };
> > >
> > > @@ -949,7 +944,7 @@ static const struct sun4i_usb_phy_cfg
> > > sun8i_v3s_cfg = {
> > > .disc_thresh = 3,
> > > .phyctl_offset = REG_PHYCTL_A33,
> > > .dedicated_clocks = true,
> > > - .enable_pmu_unk1 = true,
> > > + .pmu_unk1_clrbits = BIT(1),
> > > .phy0_dual_route = true,
> > > };
> > >
> > > @@ -959,7 +954,7 @@ static const struct sun4i_usb_phy_cfg
> > > sun50i_a64_cfg = {
> > > .disc_thresh = 3,
> > > .phyctl_offset = REG_PHYCTL_A33,
> > > .dedicated_clocks = true,
> > > - .enable_pmu_unk1 = true,
> > > + .pmu_unk1_clrbits = BIT(1),
> > > .phy0_dual_route = true,
> > > };
> > >
> > > @@ -969,7 +964,6 @@ static const struct sun4i_usb_phy_cfg
> > > sun50i_h6_cfg = {
> > > .disc_thresh = 3,
> > > .phyctl_offset = REG_PHYCTL_A33,
> > > .dedicated_clocks = true,
> > > - .enable_pmu_unk1 = true,
> > > .phy0_dual_route = true,
> > > .missing_phys = BIT(1) | BIT(2),
> > > };