Re: [PATCH v8, 1/6] dt-bindings: mediatek: add rdma_fifo_size description for mt8183 display

From: Chun-Kuang Hu
Date: Fri Dec 11 2020 - 10:06:33 EST


Hi, Yongqiang:

Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx> 於 2020年12月11日 週五 上午8:43寫道:
>
> On Thu, 2020-12-10 at 23:40 +0800, Chun-Kuang Hu wrote:
> > Hi, Yongqiang:
> >
> > Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx> 於 2020年12月10日 週四 下午5:22寫道:
> > >
> > > rdma fifo size may be different even in same SOC, add this
> > > property to the corresponding rdma
> > >
> > > Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx>
> > > ---
> > > .../bindings/display/mediatek/mediatek,disp.txt | 16 ++++++++++++++++
> > > 1 file changed, 16 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> > > index 1212207..64c64ee 100644
> > > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> > > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
> > > @@ -66,6 +66,13 @@ Required properties (DMA function blocks):
> > > argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> > > for details.
> > >
> > > +Optional properties (RDMA function blocks):
> > > +- mediatek,rdma_fifo_size: rdma fifo size may be different even in same SOC, add this
> > > + property to the corresponding rdma
> > > + the value is the Max value which defined in hardware data sheet.
> > > + rdma_fifo_size of rdma0 in mt8183 is 5120
> > > + rdma_fifo_size of rdma1 in mt8183 is 2048
> > > +
> > > Examples:
> > >
> > > mmsys: clock-controller@14000000 {
> > > @@ -207,3 +214,12 @@ od@14023000 {
> > > power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> > > clocks = <&mmsys CLK_MM_DISP_OD>;
> > > };
> > > +
> > > +rdma1: rdma@1400c000 {
> > > + compatible = "mediatek,mt8183-disp-rdma";
> > > + reg = <0 0x1400c000 0 0x1000>;
> > > + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
> > > + power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> > > + clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> > > + mediatek,rdma_fifo_size = <2048>;
> > > +};
> >
> > In [1], Rob has suggest that not add example of rdma1, it's better to
> > add mediatek,rdma_fifo_size in rdma0 for example.
> >
> > [1] https://patchwork.kernel.org/project/linux-mediatek/patch/1596855231-5782-2-git-send-email-yongqiang.niu@xxxxxxxxxxxx/
> >
> > Regards,
> > Chun-Kuang.
>
> the description of rdma0 is mt8173, and mt8173 rdma driver set the
> correspond fifo size already ok like this:
> static const struct mtk_disp_rdma_data mt8173_rdma_driver_data = {
> .fifo_size = SZ_8K,
> };
>
> please double confirm shall we add this information into rdma0
> description.
>

Device tree is used to describe hardware. That means device tree
description should not consider your driver's implementation.
mediatek,rdma-fifo-size of mt8173-rdma0 is 8K, so I could write this
information in device node because this hardware is.

Regards,
Chun-Kuang.

>
> >
> > > --
> > > 1.8.1.1.dirty
> > > _______________________________________________
> > > Linux-mediatek mailing list
> > > Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> > > http://lists.infradead.org/mailman/listinfo/linux-mediatek
>