Re: [RFC 0/4] vfio-pci/zdev: Fixing s390 vfio-pci ISM support

From: Matthew Rosato
Date: Fri Dec 11 2020 - 10:04:09 EST


On 12/11/20 9:35 AM, Cornelia Huck wrote:
On Thu, 10 Dec 2020 10:51:23 -0500
Matthew Rosato <mjrosato@xxxxxxxxxxxxx> wrote:

On 12/10/20 7:33 AM, Cornelia Huck wrote:
On Wed, 9 Dec 2020 15:27:46 -0500
Matthew Rosato <mjrosato@xxxxxxxxxxxxx> wrote:
Today, ISM devices are completely disallowed for vfio-pci passthrough as
QEMU will reject the device due to an (inappropriate) MSI-X check.
However, in an effort to enable ISM device passthrough, I realized that the
manner in which ISM performs block write operations is highly incompatible
with the way that QEMU s390 PCI instruction interception and
vfio_pci_bar_rw break up I/O operations into 8B and 4B operations -- ISM
devices have particular requirements in regards to the alignment, size and
order of writes performed. Furthermore, they require that legacy/non-MIO
s390 PCI instructions are used, which is also not guaranteed when the I/O
is passed through the typical userspace channels.

The part about the non-MIO instructions confuses me. How can MIO
instructions be generated with the current code, and why does changing

So to be clear, they are not being generated at all in the guest as the
necessary facility is reported as unavailable.

Let's talk about Linux in LPAR / the host kernel: When hardware that
supports MIO instructions is available, all userspace I/O traffic is
going to be routed through the MIO variants of the s390 PCI
instructions. This is working well for other device types, but does not
work for ISM which does not support these variants. However, the ISM
driver also does not invoke the userspace I/O routines for the kernel,
it invokes the s390 PCI layer directly, which in turn ensures the proper
PCI instructions are used -- This approach falls apart when the guest
ISM driver invokes those routines in the guest -- we (qemu) pass those
non-MIO instructions from the guest as memory operations through
vfio-pci, traversing through the vfio I/O layer in the guest
(vfio_pci_bar_rw and friends), where we then arrive in the host s390 PCI
layer -- where the MIO variant is used because the facility is available.

Per conversations with Niklas (on CC), it's not trivial to decide by the
time we reach the s390 PCI I/O layer to switch gears and use the non-MIO
instruction set.

the write pattern help?

The write pattern is a separate issue from non-MIO instruction
requirements... Certain address spaces require specific instructions to
be used (so, no substituting PCISTG for PCISTB - that happens too by
default for any writes coming into the host s390 PCI layer that are
<=8B, and they all are when the PCISTB is broken up into 8B memory
operations that travel through vfio_pci_bar_rw, which further breaks
those up into 4B operations). There's also a requirement for some
writes that the data, if broken up, be written in a certain order in
order to properly trigger events. :( The ability to pass the entire
PCISTB payload vs breaking it into 8B chunks is also significantly faster.

Let me summarize this to make sure I understand this new region
correctly:

- some devices may have relaxed alignment/length requirements for
pcistb (and friends?)

The relaxed alignment bit is really specific to PCISTB behavior, so the "and friends" doesn't apply there.

- some devices may actually require writes to be done in a large chunk
instead of being broken up (is that a strict subset of the devices
above?)

Yes, this is specific to ISM devices, which are always a relaxed alignment/length device.

The inverse is an interesting question though (relaxed alignment devices that are not ISM, which you've posed as a possible future extension for emulated devices). I'm not sure that any (real devices) exist where (relaxed_alignment && !ism), but 'what if' -- I guess the right approach would mean additional code in QEMU to handle relaxed alignment for the vfio mmio path as well (seen as pcistb_default in my qemu patchset) and being very specific in QEMU to only enable the region for an ism device.

- some devices do not support the new MIO instructions (is that a
subset of the relaxed alignment devices? I'm not familiar with the
MIO instructions)


The non-MIO requirement is again specific to ISM, which is a subset of the relaxed alignment devices. In this case, the requirement is not limited to PCISTB, and that's why PCILG is also included here. The ISM driver does not use PCISTG, and the only PCISTG instructions coming from the guest against an ISM device would be against the config space and those are OK to go through vfio still; so what was provided via the region is effectively the bare-minimum requirement to allow ISM to function properly in the guest.

The patchsets introduce a new region that (a) is used by QEMU to submit
writes in one go, and (b) makes sure to call into the non-MIO
instructions directly; it's basically killing two birds with one stone
for ISM devices. Are these two requirements (large writes and non-MIO)
always going hand-in-hand, or is ISM just an odd device?

I would say that ISM is definitely a special-case device, even just looking at the way it's implemented in the base kernel (interacting directly with the s390 kernel PCI layer in order to avoid use of MIO instructions -- no other driver does this). But that said, having the two requirements hand-in-hand I think is not bad, though -- This approach ensures the specific instruction the guest wanted (or in this case, needed) is actually executed on the underlying host.

That said, the ability to re-use the large write for other devices would be nice -- but as hinted in the QEMU cover letter, this approach only works because ISM does not support MSI-X; using this approach for MSI-X-enabled devices breaks the MSI-X masking that vfio-pci does in QEMU (I tried an approach that used this region approach for all 3 instructions as a test, PCISTG/PCISTB/PCILG, and threw it against mlx -- any writes against an MSI-X enabled bar will miss the msi-x notifiers since we aren't performing memory operations against the typical vfio-pci bar).


If there's an expectation that the new region will always use the
non-MIO instructions (in addition to the changed write handling), it
should be noted in the description for the region as well.


Yes, this is indeed the expectation; I can clarify that.