Re: [PATCH] usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled

From: Heikki Krogerus
Date: Fri Dec 11 2020 - 03:37:17 EST


On Thu, Dec 10, 2020 at 11:11:45PM -0800, Badhri Jagan Sridharan wrote:
> Auto discharge circuits kick in only when vbus decays and reaches
> VBUS_SINK_DISCONNECT_THRESHOLD threshold. Enable bleed discharge to
> discharge vbus to VBUS_SINK_DISCONNECT_THRESHOLD upon disconnect.
>
> Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>

Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>

> ---
> drivers/usb/typec/tcpm/tcpci.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
> index af5524338a63..f676abab044b 100644
> --- a/drivers/usb/typec/tcpm/tcpci.c
> +++ b/drivers/usb/typec/tcpm/tcpci.c
> @@ -725,6 +725,8 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
> tcpci->tcpc.enable_auto_vbus_discharge = tcpci_enable_auto_vbus_discharge;
> tcpci->tcpc.set_auto_vbus_discharge_threshold =
> tcpci_set_auto_vbus_discharge_threshold;
> + regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, TCPC_POWER_CTRL_BLEED_DISCHARGE,
> + TCPC_POWER_CTRL_BLEED_DISCHARGE);
> }
>
> if (tcpci->data->vbus_vsafe0v)
> --
> 2.29.2.576.ga3fc446d84-goog

--
heikki