Re: [PATCH v4 1/5] usb: dwc3: core: Host wake up support from system suspend

From: Matthias Kaehlcke
Date: Thu Dec 10 2020 - 19:05:59 EST


On Sat, Nov 28, 2020 at 08:01:31AM +0530, mgautam@xxxxxxxxxxxxxx wrote:
> Hi,
>
>
> On 2020-10-28 02:07, Sandeep Maheswaram wrote:
> > Avoiding phy powerdown in host mode so that it can be woken up by
> > devices.
> > Added hs_phy_mode flag to check connection status and set phy mode
> > and configure interrupts.
> >
> > Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
> > ---
> > drivers/usb/dwc3/core.c | 14 +++-----------
> > drivers/usb/dwc3/core.h | 2 ++
> > 2 files changed, 5 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > index bdf0925..0e4bc1e 100644
> > --- a/drivers/usb/dwc3/core.c
> > +++ b/drivers/usb/dwc3/core.c
> > @@ -1672,10 +1672,6 @@ static int dwc3_suspend_common(struct dwc3
> > *dwc, pm_message_t msg)
> > dwc3_core_exit(dwc);
> > break;
> > case DWC3_GCTL_PRTCAP_HOST:
> > - if (!PMSG_IS_AUTO(msg)) {
> > - dwc3_core_exit(dwc);
> > - break;
> > - }
>
>
> This could be a problem for platforms that don't support runtime_suspend
> and rely on dwc3_core_exit to power-down PHY.
> IMO you can continue to do dwc3_core_exit() if runtime_pm isn't enabled
> for the device.

This would imply that USB wakeup isn't supported on such platforms, right?

Could we have a flag that the dwc3-<glue> driver can set to indicate that
wakeup is enabled for this suspend cycle to omit the PHY power-down?

> >
> > /* Let controller to suspend HSPHY before PHY driver suspends */
> > if (dwc->dis_u2_susphy_quirk ||
> > @@ -1733,13 +1729,9 @@ static int dwc3_resume_common(struct dwc3 *dwc,
> > pm_message_t msg)
> > spin_unlock_irqrestore(&dwc->lock, flags);
> > break;
> > case DWC3_GCTL_PRTCAP_HOST:
> > - if (!PMSG_IS_AUTO(msg)) {
> > - ret = dwc3_core_init_for_resume(dwc);
> > - if (ret)
> > - return ret;
> > - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
> > - break;
> > - }
> > +
> > + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
> > +
> > /* Restore GUSB2PHYCFG bits that were modified in suspend */
> > reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> > if (dwc->dis_u2_susphy_quirk)
> > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> > index 74323b1..da63d4a3 100644
> > --- a/drivers/usb/dwc3/core.h
> > +++ b/drivers/usb/dwc3/core.h
> > @@ -1101,6 +1101,8 @@ struct dwc3 {
> >
> > bool phys_ready;
> >
> > + unsigned int hs_phy_mode;
> > +
>
> This change should instead be part of the other patch ?
> "usb: dwc3: host: Add suspend_quirk for dwc3 host"

+1