Re: [PATCH 1/2] clk: qcom: gcc-sc7180: Use floor ops for sdcc clks

[Bjorn Andersson]

On Thu 10 Dec 12:22 CST 2020, Douglas Anderson wrote:

> I would repeat the same commit message that was in commit 5e4b7e82d497
> ("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") but it seems
> silly to do so when you could just go read that commit.
> 
> NOTE: this is actually extra terrible because we're missing the 50 MHz
> rate in the table (see the next patch AKA ("clk: qcom: gcc-sc7180: Add
> 50 MHz clock rate for SDC2")).  That means then when you run an older
> SD card it'll try to clock it at 100 MHz when it's only specced to run
> at 50 MHz max.  As you can probably guess that doesn't work super
> well.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
> ---
> Taniya: can you please update whatever process is used to generate
> these clock files to use floor for SD card clocks.  I hope you can
> also scour through these files looking for similar problems on other
> SoCs and submit patches for them.
> 
>  drivers/clk/qcom/gcc-sc7180.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
> index 68d8f7aaf64e..b080739ab0c3 100644
> --- a/drivers/clk/qcom/gcc-sc7180.c
> +++ b/drivers/clk/qcom/gcc-sc7180.c
> @@ -642,7 +642,7 @@ static struct clk_rcg2 gcc_sdcc1_ice_core_clk_src = {
>  		.name = "gcc_sdcc1_ice_core_clk_src",
>  		.parent_data = gcc_parent_data_0,
>  		.num_parents = 4,
> -		.ops = &clk_rcg2_ops,
> +		.ops = &clk_rcg2_floor_ops,
>  	},
>  };
>  
> @@ -666,7 +666,7 @@ static struct clk_rcg2 gcc_sdcc2_apps_clk_src = {
>  		.name = "gcc_sdcc2_apps_clk_src",
>  		.parent_data = gcc_parent_data_5,
>  		.num_parents = 5,
> -		.ops = &clk_rcg2_ops,
> +		.ops = &clk_rcg2_floor_ops,
>  	},
>  };
>  
> -- 
> 2.29.2.576.ga3fc446d84-goog
>