Re: [PATCH 0/4] Reduce scanning of runqueues in select_idle_sibling

From: Mel Gorman
Date: Thu Dec 10 2020 - 06:06:06 EST


On Thu, Dec 10, 2020 at 10:38:37AM +0100, Vincent Guittot wrote:
> > while testing your patchset and Aubrey one on top of tip, I'm facing
> > some perf regression on my arm64 numa system on hackbench and reaim.
> > The regression seems to comes from your patchset but i don't know
> > which patch in particular yet
> >
> > hackbench -l 256000 -g 1
> >
> > v5.10-rc7 + tip/sched/core 13,255(+/- 3.22%)
> > with your patchset 15.368(+/- 2.74) -15.9%
> >
> > I'm also seeing perf regression on reaim but this one needs more
> > investigation before confirming
> >
> > TBH, I was not expecting regressions. I'm running more test to find
> > which patch is the culprit
>
> The regression comes from patch 3: sched/fair: Do not replace
> recent_used_cpu with the new target
>

That's not entirely surprising. The intent of the patch is to increase the
hit rate of p->recent_used_cpu but it's not a guaranteed win due to two
corner cases. If multiple tasks have the same p->recent_used_cpu, they can
race to use that CPU and stack as a result instead of searching the domain.
If SMT is enabled then p->recent_used_cpu can point to an idle CPU that has
a busy sibling which the search would have avoided in select_idle_core().

I think you are using processes and sockets for hackbench but as you'll
see later, hackbench can be used both to show losses and gains.

I originally tested with 6 machines covering Broadwell (2 socket), Haswell
(2 socket), Skylake (1 socket), Cascadelake (2 socket), EPYC (2 socket)
and EPYC 2 (2 socket) with a range of workloads including hackbench. Of
those, just one reported a major problem with 1 group -- the EPYC 1 machine

EPYC hackbench process-sockets
5.10.0-rc6 5.10.0-rc6
baseline-v2r2 altrecent-v2r5
Amean 1 1.0607 ( 0.00%) 1.1480 ( -8.23%)
Amean 4 1.3277 ( 0.00%) 1.3117 ( 1.21%)
Amean 7 1.6940 ( 0.00%) 1.6950 ( -0.06%)
Amean 12 2.1600 ( 0.00%) 2.1367 ( 1.08%)
Amean 21 3.2450 ( 0.00%) 3.5883 ( -10.58%)
Amean 30 4.1673 ( 0.00%) 3.9653 ( 4.85%)
Amean 48 4.9257 ( 0.00%) 5.0000 ( -1.51%)
Amean 79 7.4950 ( 0.00%) 7.4563 ( 0.52%)
Amean 110 10.4233 ( 0.00%) 10.4727 ( -0.47%)
Amean 141 13.4690 ( 0.00%) 13.4563 ( 0.09%)
Amean 172 16.6450 ( 0.00%) 16.6033 ( 0.25%)
Amean 203 19.4873 ( 0.00%) 19.7893 * -1.55%*
Amean 234 22.5507 ( 0.00%) 22.8033 ( -1.12%)
Amean 265 25.3380 ( 0.00%) 25.6490 ( -1.23%)
Amean 296 28.0070 ( 0.00%) 28.1270 ( -0.43%)

That's showing an 8% loss for 1 group and also a problem with 21 groups.
Otherwise, it was more or less flat. EPYC 2 also showed a 2% loss for 1
group and 9% loss for 21 groups (probably related to the size of the LLC
domain as there are many LLCs per socket on EPYC*).

For the *same* machine running hackbench using pipes instead of sockets
we get

EPYC hackbench process-pipes
Amean 1 0.9497 ( 0.00%) 0.9517 ( -0.21%)
Amean 4 1.2253 ( 0.00%) 1.1387 ( 7.07%)
Amean 7 2.0677 ( 0.00%) 1.7460 * 15.56%*
Amean 12 2.8717 ( 0.00%) 2.4797 * 13.65%*
Amean 21 4.4053 ( 0.00%) 3.7463 * 14.96%*
Amean 30 5.3983 ( 0.00%) 4.1097 * 23.87%*
Amean 48 6.1050 ( 0.00%) 4.6873 * 23.22%*
Amean 79 7.5640 ( 0.00%) 6.8493 ( 9.45%)
Amean 110 12.2627 ( 0.00%) 9.4613 * 22.84%*
Amean 141 16.9980 ( 0.00%) 13.8327 * 18.62%*
Amean 172 21.5280 ( 0.00%) 17.3693 * 19.32%*
Amean 203 25.4480 ( 0.00%) 20.9947 * 17.50%*
Amean 234 29.6570 ( 0.00%) 24.9613 * 15.83%*
Amean 265 33.0713 ( 0.00%) 28.1103 * 15.00%*
Amean 296 37.4443 ( 0.00%) 31.8757 * 14.87%*

So even on the *same hardware*, hackbench can show very different results
depending on how it is run.

The rest of the machines were more or less neutral for this patch. Once
hackbench saturates the machine, the hit rate on recent_used_cpu is going
to be low

1-socket skylake
Amean 1 1.3183 ( 0.00%) 1.2827 * 2.71%*
Amean 3 3.6750 ( 0.00%) 3.6610 ( 0.38%)
Amean 5 6.1003 ( 0.00%) 6.0190 * 1.33%*
Amean 7 8.6063 ( 0.00%) 8.6047 ( 0.02%)
Amean 12 14.9480 ( 0.00%) 15.0327 ( -0.57%)
Amean 18 22.3430 ( 0.00%) 22.6680 ( -1.45%)
Amean 24 29.4970 ( 0.00%) 29.6677 ( -0.58%)
Amean 30 36.7373 ( 0.00%) 36.3687 ( 1.00%)
Amean 32 39.0973 ( 0.00%) 39.4417 ( -0.88%)

Shows a 2.71% gain for one group, otherwise more or less neutral

2-socket CascadeLake

Amean 1 0.3663 ( 0.00%) 0.3657 ( 0.18%)
Amean 4 0.7510 ( 0.00%) 0.7793 ( -3.77%)
Amean 7 1.2650 ( 0.00%) 1.2583 ( 0.53%)
Amean 12 1.9510 ( 0.00%) 1.9450 ( 0.31%)
Amean 21 2.9677 ( 0.00%) 3.0277 ( -2.02%)
Amean 30 4.2993 ( 0.00%) 4.0237 * 6.41%*
Amean 48 6.5373 ( 0.00%) 6.2987 * 3.65%*
Amean 79 10.5513 ( 0.00%) 10.3280 ( 2.12%)
Amean 110 15.8567 ( 0.00%) 13.9817 ( 11.82%)
Amean 141 17.4243 ( 0.00%) 17.3177 ( 0.61%)
Amean 172 21.0473 ( 0.00%) 20.9760 ( 0.34%)
Amean 203 25.1070 ( 0.00%) 25.1150 ( -0.03%)
Amean 234 28.6753 ( 0.00%) 28.9383 ( -0.92%)
Amean 265 32.7970 ( 0.00%) 32.9663 ( -0.52%)
Amean 296 36.6510 ( 0.00%) 36.6753 ( -0.07%)

Neutral for 1 group, small regression for 4 groups, few gains around the
middle, neutral when over-saturated.

select_idle_sibling is a curse because it's very rare that a change to
it is a universal win. On balance, I think it's better to avoid searching
the domain at all where possible even if there are cases where searching
can have a benefit such as finding an idle core instead of picking an
idle CPU with a busy sibling via p->recent_used_cpu.

--
Mel Gorman
SUSE Labs