[PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2

From: Lukasz Majewski
Date: Wed Dec 09 2020 - 17:11:09 EST


From: Mans Rullgard <mans@xxxxxxxxx>

Add pinmux setting for USB1 overcurrent on pwm2 pad.

Signed-off-by: Mans Rullgard <mans@xxxxxxxxx>
Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
---
Changes for v2:
- Add S-o-B
---
arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index bbe52150b165..84d0176d5193 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -948,6 +948,16 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};

+ usb1_pins_b: usb1@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM2__USB1_OVERCURRENT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
usb0_id_pins_a: usb0id@0 {
reg = <0>;
fsl,pinmux-ids = <
--
2.20.1