[PATCH v3 2/2] arm64: dts: mediatek: mt8516: add support for APDMA

From: Fabien Parent
Date: Wed Dec 09 2020 - 06:48:52 EST


Add support the APDMA IP on MT8516. APDMA is a DMA controller
for UARTs.

Signed-off-by: Fabien Parent <fparent@xxxxxxxxxxxx>
---

V3: remove unicode symbol that slips into patch summary
V2: Add missing dma-names properties on uart nodes

arch/arm64/boot/dts/mediatek/mt8516.dtsi | 30 ++++++++++++++++++++++++
1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index e6e4d9d60094..b80e95574bef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -276,6 +276,27 @@ gic: interrupt-controller@10310000 {
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};

+ apdma: dma-controller@11000480 {
+ compatible = "mediatek,mt8516-uart-dma",
+ "mediatek,mt6577-uart-dma";
+ reg = <0 0x11000480 0 0x80>,
+ <0 0x11000500 0 0x80>,
+ <0 0x11000580 0 0x80>,
+ <0 0x11000600 0 0x80>,
+ <0 0x11000980 0 0x80>,
+ <0 0x11000a00 0 0x80>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_LOW>;
+ dma-requests = <6>;
+ clocks = <&topckgen CLK_TOP_APDMA>;
+ clock-names = "apdma";
+ #dma-cells = <1>;
+ };
+
uart0: serial@11005000 {
compatible = "mediatek,mt8516-uart",
"mediatek,mt6577-uart";
@@ -284,6 +305,9 @@ uart0: serial@11005000 {
clocks = <&topckgen CLK_TOP_UART0_SEL>,
<&topckgen CLK_TOP_UART0>;
clock-names = "baud", "bus";
+ dmas = <&apdma 0
+ &apdma 1>;
+ dma-names = "tx", "rx";
status = "disabled";
};

@@ -295,6 +319,9 @@ uart1: serial@11006000 {
clocks = <&topckgen CLK_TOP_UART1_SEL>,
<&topckgen CLK_TOP_UART1>;
clock-names = "baud", "bus";
+ dmas = <&apdma 2
+ &apdma 3>;
+ dma-names = "tx", "rx";
status = "disabled";
};

@@ -306,6 +333,9 @@ uart2: serial@11007000 {
clocks = <&topckgen CLK_TOP_UART2_SEL>,
<&topckgen CLK_TOP_UART2>;
clock-names = "baud", "bus";
+ dmas = <&apdma 4
+ &apdma 5>;
+ dma-names = "tx", "rx";
status = "disabled";
};

--
2.29.2